--- wikisrc/ports/evbarm/beaglebone.mdwn	2015/11/02 10:43:47	1.14
+++ wikisrc/ports/evbarm/beaglebone.mdwn	2015/12/07 09:32:48	1.16
@@ -2,9 +2,12 @@
 
 [[images/beaglebone.jpg]]
 
-This page attempts to document and coordinate efforts towards NetBSD on [BeagleBone](http://beagleboard.org/bone) and [BeagleBone Black](http://beagleboard.org/black).
+This page attempts to document and coordinate efforts towards NetBSD on
+[BeagleBone](http://beagleboard.org/bone) and
+[BeagleBone Black](http://beagleboard.org/black).
 
-(BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by SparkFun Electronics used under CC-By-2.0 license)
+(BeagleBone [image](http://www.flickr.com/photos/sparkfun/8267577194/) by
+SparkFun Electronics used under CC-By-2.0 license)
 
 [[!toc levels=2]]
 
@@ -28,7 +31,9 @@ This page attempts to document and coord
 
 # BeagleBone Black User LEDs
 
-The four blue user LEDs on the BeagleBone Black are wired to GPIO1_21 through GPIO1_24. To control the LEDs from userland, set **gpio=YES** in rc.conf and add this to */etc/gpio.conf*:
+The four blue user LEDs on the BeagleBone Black are wired to GPIO1_21 through
+GPIO1_24. To control the LEDs from userland, set **gpio=YES** in rc.conf and
+add this to */etc/gpio.conf*:
 
 [[!template  id=programlisting text="""
 gpio1 21 set out USR0
@@ -37,7 +42,8 @@ gpio1 23 set out USR2
 gpio1 24 set out USR3
 """]]
 
-After rebooting, the LED states can be controlled with [[!template id=man name="gpioctl" section="8"]].
+After rebooting, the LED states can be controlled with
+[[!template id=man name="gpioctl" section="8"]].
 
 [[!template  id=programlisting text="""
 # turn the USR0 light on
@@ -53,11 +59,17 @@ gpioctl gpio1 USR0 toggle
 
 # Sample dmesg
 [[!template id=filecontent name="dmesg" text="""
-NetBSD 7.99.9 (BEAGLEBONE) #2: Tue Apr 14 20:24:09 ADT 2015
-        Jared@Jared-PC:/cygdrive/d/netbsd/src/sys/arch/evbarm/compile/obj/BEAGLEBONE
+Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
+    The NetBSD Foundation, Inc.  All rights reserved.
+Copyright (c) 1982, 1986, 1989, 1991, 1993
+    The Regents of the University of California.  All rights reserved.
+
+NetBSD 7.0 (BEAGLEBONE.201509250726Z)
 total memory = 512 MB
 avail memory = 503 MB
 sysctl_createv: sysctl_create(machine_arch) returned 17
+kern.module.path=/stand/evbarm/7.0/modules
 timecounter: Timecounters tick every 10.000 msec
 mainbus0 (root)
 cpu0 at mainbus0 core 0: 550 MHz Cortex-A8 r3p2 (Cortex V7A core)
@@ -79,11 +91,13 @@ gpmc0 at mainbus0 base 0x50000000: Gener
 gpmc0: CS#0 valid, addr 0x08000000, size 256MB
 com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
 com0: console
-sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64: SDHC controller (EDMA)
+sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64sdhc0: EDMA tx channel 24, rx channel 25
+: SDHC controller (EDMA)
 sdhc0: SD Host Specification 2.0, rev.49
 sdhc0: using DMA transfer
 sdmmc0 at sdhc0 slot 0
-sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28: SDHC controller (EDMA)
+sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28sdhc1: EDMA tx channel 2, rx channel 3
+: SDHC controller (EDMA)
 sdhc1: SD Host Specification 2.0, rev.49
 sdhc1: using DMA transfer
 sdmmc1 at sdhc1 slot 0
@@ -92,7 +106,7 @@ iic0 at tiiic0: I2C bus
 seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
 tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC (rev 1.2)
 tps65217pmic0: power sources USB max 1300 mA, [AC] max 2500 mA
-tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCDC2: 1325 mV] [DCDC3: 1100 mV]
+tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCDC2: 1100 mV] [DCDC3: 1100 mV] 
 omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
 omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
 omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
@@ -104,8 +118,10 @@ motg1: Dynamic FIFO sizing detected, ass
 usb0 at motg1: USB revision 2.0
 cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
 cpsw0: Ethernet address 90:59:af:5c:d0:94
-ukphy0 at cpsw0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
+ukphy0 at cpsw0 phy 0WARNING: module error: vfs load failed for `miiverbose', error 45
+: OUI 0x00800f, model 0x000f, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
+trng0 at obio0 addr 0x48310000-0x48311fff intr 111
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
 uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
@@ -116,6 +132,4 @@ ld1: 1832 MB, 930 cyl, 64 head, 63 sec, 
 ld1: 4-bit width, bus clock 52.000 MHz
 boot device: ld1
 root on ld1a dumps on ld1b
-root file system type: ffs
-kern.module.path=/stand/evbarm/7.99.9/modules
 """]]