--- wikisrc/ports/evbarm/apple.mdwn	2021/08/31 10:24:08	1.4
+++ wikisrc/ports/evbarm/apple.mdwn	2021/10/25 06:56:39	1.9
@@ -9,7 +9,9 @@ Please note that installation on an Appl
 - Uncompress <http://nycdn.netbsd.org/pub/NetBSD-daily/HEAD/latest/evbarm-aarch64/binary/gzimg/arm64.img.gz> and write it to a USB drive. *Make sure this file was built after Aug 30, 2021!*
 
 - Build and install `sysutils/u-boot-apple-m1` from pkgsrc.
-   - The bootloader will be installed to `/usr/pkg/share/u-boot/apple-m1/u-boot.macho`.
+   - The bootloader for the Mac mini (M1, 2020) will be installed to `/usr/pkg/share/u-boot/apple-m1/u-boot-t8103-j274.macho`.
+   - j274 - Mac mini (M1, 2020)
+   - j293 - MacBook Pro (13-inch, M1, 2020)
 
 - Boot the M1 system into 1TR mode by holding the power button at startup. Until the "Loading startup options..." message is displayed, then select Options.
    - In the Utilities menu, select Terminal to bring up a root shell.
@@ -21,9 +23,9 @@ Please note that installation on an Appl
 - Copy the u-boot.macho from pkgsrc to the mini over the network (curl, sftp, etc).
 
 - Install the new bootloader:
-    - `# kmutil configure-boot -c u-boot.macho -C -v /Volumes/Macintosh\ HD/`
+    - `# kmutil configure-boot -c u-boot-t8103-j274.macho -C -v /Volumes/Macintosh\ HD/`
 
-- Reboot with a USB drive plugged in.
+- Reboot with a arm64.img USB drive plugged in.
 
 # Supported hardware
 - Apple Mac mini (M1, 2020)
@@ -31,9 +33,13 @@ Please note that installation on an Appl
     - Interrupt controller
     - IOMMU
     - PCIe
-        - USB
+        - USB (Type-A ports)
         - Ethernet
+    - USB (Type-C ports)
     - Framebuffer console
+        - X11 (requires `startx -- -depth 30`)
+
+# Back to MacOS
 
 # Commits
 
@@ -90,3 +96,7 @@ Add support for FIQs:
 Initial Apple M1 support:
 
 - <https://mail-index.netbsd.org/source-changes/2021/08/30/msg131961.html>
+
+Make scheduler aware of efficiency and performance cores:
+
+- <https://mail-index.netbsd.org/source-changes/2021/09/01/msg131982.html>