File:  [NetBSD Developer Wiki] / wikisrc / ports / evbarm / allwinner.mdwn
Revision 1.33: download - view: text, annotated - select for diffs
Tue Nov 18 08:17:22 2014 UTC (6 years, 8 months ago) by snj
Branches: MAIN
CVS tags: HEAD
there is no beaglebone.img. use beagleboard.img.

    1: [[!meta title="NetBSD/evbarm on Allwinner Technology SoCs"]]
    2: 
    3: [[!toc levels=2]]
    4: 
    5: # Supported boards
    6:  - [Banana Pi](http://www.bananapi.org/p/product.html) (BPI)
    7:  - Cubieboard 2 (CUBIEBOARD)
    8:  - Cubietruck (CUBIETRUCK)
    9:  - [Merrii Hummingbird A31](http://www.merrii.com/en/pla_d.asp?id=172) (HUMMINGBIRD_A31)
   10: 
   11: # Supported hardware
   12:  - SoCs
   13:    - Cortex-A7: A20 (2-core), A31 (4-core)
   14:  - SD/MMC controller (DMA)
   15:  - DMA controller
   16:  - GPIO
   17:    - Configuration using FEX scripts is supported
   18:  - UART
   19:  - I2C
   20:  - P2WI (A31)
   21:  - PMU
   22:    - AXP209 (A20)
   23:    - AXP221 (A31)
   24:  - Watchdog timer
   25:  - RTC
   26:  - Audio codec
   27:  - USB host
   28:    - OHCI
   29:    - EHCI
   30:    - OTG (not yet working on A31)
   31:  - SATA (A10/A20)
   32:  - Gigabit Ethernet (GMAC)
   33:  - HDMI (A20/A31)
   34:    - DDC / EDID mode detection
   35:    - Audio support
   36:  - Framebuffer
   37:  - IR receiver (A20/A31)
   38: 
   39: # TODO
   40:  - SoCs
   41:    - Cortex-A8: A10
   42:    - Cortex-A7/A15: A80
   43:  - OTG (A31)
   44:  - USB device mode
   45:  - Bluetooth / WiFi (Cubietruck, Hummingbird A31)
   46:  - 3G (Hummingbird A31)
   47:  - SD/MMC UHS-I support (needs sdmmc(4) changes)
   48:  - TV input (Hummingbird A31)
   49:  - NAND
   50:  - Fast Ethernet (EMAC)
   51:  - IR transmitter (A20)
   52: 
   53: # Installation
   54: 
   55: ## A10 / A20 based boards
   56: 
   57: * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *beagleboard.img*
   58: * Download a U-Boot build for your board from the linux-sunxi web site <http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi/u-boot-sunxi-latest/>
   59: * Write the *u-boot-sunxi-with-spl.bin* loader to the base image:
   60: [[!template  id=programlisting text="""
   61: # dd if=u-boot-sunxi-with-spl.bin of=beagleboard.img bs=1k seek=8 conv=notrunc
   62: """]]
   63: * Write the image to an SD card.
   64: * Copy the kernel (netbsd.ub) for your board to the root of the MS-DOS partition.
   65: * Create or edit uEnv.txt on the MS-DOS partition:
   66: [[!template  id=programlisting text="""
   67: bootargs=root=ld0a
   68: uenvcmd=mmc dev 0; mmc rescan; fatload mmc 0:1 82000000 netbsd.ub; bootm 82000000
   69: """]]
   70: 
   71: ## A31 based boards
   72: 
   73: TBD.
   74: 
   75: # Big (endian) fun
   76: 
   77: You can run this boards with a little endian (this is the default and implied by above install instructions)
   78: or with a big endian kernel and userland. However, kernel and userland endianness needs to match.
   79: 
   80: To build a big endian release (or sets) use 
   81: [[!template  id=programlisting text="""
   82: ./build.sh -m evbearmv7hf-eb 
   83: """]]
   84: where -eb means endianness big, hf is hardware floating point support, and earm is the modern "extended" ABI for ARM CPUs, and finally v7 is version 7 of the supported instruction set.
   85: 
   86: # FEX scripts
   87: 
   88: Board configuration scripts can be found here: <https://github.com/linux-sunxi/sunxi-boards/blob/master/sys_config>. You can compile them with the "fex2bin" tool found here: <https://github.com/linux-sunxi/sunxi-tools>.
   89: 
   90: To use, copy the compiled FEX to your MS-DOS partition, load it with U-Boot, and then tell the kernel where to find it with the "sysconfig=" boot option. For example, uEnv.txt on a Cubieboard2 might look like this:
   91: 
   92: [[!template  id=programlisting text="""
   93: bootargs=root=ld0a sysconfig=0x43000000
   94: uenvcmd=mmc dev 0; mmc rescan; fatload mmc 0:1 43000000 cubieboard2.bin; fatload mmc 0:1 82000000 netbsd.ub; bootm 82000000
   95: """]]
   96: 
   97: Some pre-compiled .bin files can be found here: <http://ftp.netbsd.org/pub/NetBSD/misc/jmcneill/allwinner/fex/>
   98: 
   99: # Framebuffer console
  100: 
  101: To use HDMI for the console device, add *console=fb* to bootargs in uEnv.txt.
  102: 
  103: If the connected display does not let you disable overscan, you can add a margin to the framebuffer by with the *fb.margin* bootargs option. For example, to set a 25-pixel margin around the screen, add *fb.margin=25* to uEnv.txt
  104: 
  105: # HDMI audio
  106: 
  107: The default audio device is the analog audio codec. To change the default device, use the *audiocfg* command:
  108: 
  109: [[!template  id=programlisting text="""
  110: a31# audiocfg list
  111: 0: [*] audio0 @ awinac0: Allwinner CODEC A31, 2 playback channels
  112: 1: [ ] audio1 @ awinhdmiaudio0: Allwinner HDMI 1.4, 2 playback channels
  113: a31# audiocfg default 1
  114: setting default audio device to audio1
  115: a31# audiocfg list
  116: 0: [ ] audio0 @ awinac0: Allwinner CODEC A31, 2 playback channels
  117: 1: [*] audio1 @ awinhdmiaudio0: Allwinner HDMI 1.4, 2 playback channels
  118: """]]
  119: 
  120: # Board specific notes
  121: 
  122: ## Merrii Hummingbird A31
  123: 
  124: There doesn't appear to be a meaningful way to generate a MAC address on these boards. U-Boot from the A31 SDK and from the u-boot-sunxi tree both lack GMAC support, and the Security ID registers (at 0x01c23800) appear to be empty.
  125: 
  126: To overcome this, you can specify your own MAC address in *uEnv.txt*:
  127: [[!template  id=programlisting text="""
  128: bootargs=root=ld0a awge0.mac-address=02:a0:3d:88:1a:1e
  129: """]]

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb