Return to allwinner.mdwn CVS log

Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Annotation of wikisrc/ports/evbarm/allwinner.mdwn, revision 1.19

1.1       wiki        1: [[!meta title="NetBSD/evbarm on Allwinner Technology SoCs"]]
                      2: 
1.18      wiki        3: [[!toc levels=2]]
                      4: 
1.1       wiki        5: # Supported boards
1.11      wiki        6:  - [Banana Pi](http://www.bananapi.org/p/product.html) (BPI)
1.1       wiki        7:  - Cubieboard, Cubieboard 2 (CUBIEBOARD)
                      8:  - Cubietruck (CUBIETRUCK)
1.10      wiki        9:  - [Merrii Hummingbird A31](http://www.merrii.com/en/pla_d.asp?id=172) (HUMMINGBIRD_A31)
1.1       wiki       10: 
                     11: # Supported hardware
                     12:  - SoCs
                     13:    - Cortex-A8: A10
1.13      wiki       14:    - Cortex-A7: A20, A31
1.14      wiki       15:  - SD/MMC controller (DMA)
1.1       wiki       16:  - DMA controller
                     17:  - GPIO
                     18:  - UART
                     19:  - I2C
                     20:  - P2WI (A31)
                     21:  - PMU
                     22:    - AXP209 (A20)
                     23:    - AXP221 (A31)
                     24:  - Watchdog timer
                     25:  - RTC
                     26:  - Audio codec
1.14      wiki       27:  - USB host
1.1       wiki       28:    - OHCI
                     29:    - EHCI
1.14      wiki       30:    - OTG (not yet working on A31)
1.1       wiki       31:  - SATA (A10/A20)
                     32:  - Gigabit Ethernet (GMAC)
1.2       wiki       33: 
1.14      wiki       34: # TODO
                     35:  - MULTIPROCESSOR is not yet stable
                     36:  - HDMI (some work completed here for A20)
                     37:  - Framebuffer
                     38:  - OTG (A31)
                     39:  - USB device mode
                     40:  - Bluetooth / WiFi (Cubietruck, Hummingbird A31)
                     41:  - 3G (Hummingbird A31)
                     42:  - SD/MMC UHS-I support (needs sdmmc(4) changes)
1.15      wiki       43:  - TV input (Hummingbird A31)
1.16      wiki       44:  - NAND
1.19    ! wiki       45:  - Fast Ethernet (EMAC)
1.14      wiki       46: 
1.2       wiki       47: # Installation
                     48: 
                     49: ## A10 / A20 based boards
                     50: 
1.3       wiki       51: * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *beaglebone.img*
1.2       wiki       52: * Download a U-Boot build for your board from the linux-sunxi web site <http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi/u-boot-sunxi-latest/>
                     53: * Write the *u-boot-sunxi-with-spl.bin* loader to the base image:
                     54: [[!template  id=programlisting text="""
                     55: # dd if=u-boot-sunxi-with-spl.bin of=beaglebone.img bs=1k seek=8 conv=notrunc
                     56: """]]
                     57: * Write the image to an SD card.
1.12      wiz        58: * Copy the kernel (netbsd.ub) for your board to the root of the MS-DOS partition.
                     59: * Create or edit uEnv.txt on the MS-DOS partition:
1.2       wiki       60: [[!template  id=programlisting text="""
                     61: bootargs=root=ld0a
                     62: uenvcmd=mmc dev 0; mmc rescan; fatload mmc 0:1 82000000 netbsd.ub; bootm 82000000
                     63: """]]
                     64: 
                     65: ## A31 based boards
                     66: 
                     67: TBD.
1.5       wiki       68: 
1.7       wiki       69: # Big (endian) fun
1.5       wiki       70: 
                     71: You can run this boards with a little endian (this is the default and implied by above install instructions)
1.12      wiz        72: or with a big endian kernel and userland. However, kernel and userland endianness needs to match.
1.5       wiki       73: 
                     74: To build a big endian release (or sets) use 
                     75: [[!template  id=programlisting text="""
                     76: ./build.sh -m evbearmv7hf-eb 
                     77: """]]
1.12      wiz        78: where -eb means endianness big, hf is hardware floating point support, and earm is the modern "extended" ABI for ARM CPUs, and finally v7 is version 7 of the supported instruction set.
1.17      wiki       79: 
                     80: # Board specific notes
                     81: 
                     82: ## Merrii Hummingbird A31
                     83: 
                     84: There doesn't appear to be a meaningful way to generate a MAC address on these boards. U-Boot from the A31 SDK and from the u-boot-sunxi tree both lack GMAC support, and the Security ID registers (at 0x01c23800) appear to be empty.
                     85: 
                     86: To overcome this, you can specify your own MAC address in *uEnv.txt*:
                     87: [[!template  id=programlisting text="""
                     88: bootargs=root=ld0a awge0.mac-address=02:a0:3d:88:1a:1e
                     89: """]]