Diff for /wikisrc/ports/evbarm/allwinner.mdwn between versions 1.96 and 1.97

version 1.96, 2018/11/20 12:05:00 version 1.97, 2018/11/24 19:13:29
Line 45  NetBSD supports many boards based on All Line 45  NetBSD supports many boards based on All
   
 # Supported hardware  # Supported hardware
   
 Please refer to the [32-bit](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/SUNXI) or [64-bit](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/GENERIC64) kernel configs for the most up-to-date list of supported hardware.  Please refer to the [GENERIC (32-bit)](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/GENERIC) or [GENERIC64 (64-bit)](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/GENERIC64) kernel configs for the most up-to-date list of supported hardware.
   
 <table>  <table>
   <thead>    <thead>
Line 94  Please refer to the [32-bit](https://nxr Line 94  Please refer to the [32-bit](https://nxr
   
 - Download or build **armv7.img** (32-bit) or **arm64.img** (64-bit) from NetBSD -current  - Download or build **armv7.img** (32-bit) or **arm64.img** (64-bit) from NetBSD -current
 - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**  - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**
 - Install a board-specific U-Boot (2017.07 or later) from pkgsrc to the SD card  - Install a board-specific U-Boot (2018.05 or later) from pkgsrc to the SD card
   (the `u-boot-sunxi-with-spl.bin`-s are provided by `sysutils/u-boot-<boardname>` packages):    (the `u-boot-sunxi-with-spl.bin`-s are provided by `sysutils/u-boot-<boardname>` packages):
   **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**    **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**
   

Removed from v.1.96  
changed lines
  Added in v.1.97


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb