Diff for /wikisrc/ports/evbarm/allwinner.mdwn between versions 1.89 and 1.104

version 1.89, 2018/05/10 00:12:47 version 1.104, 2019/11/24 14:45:36
Line 20  NetBSD supports many boards based on All Line 20  NetBSD supports many boards based on All
     </tr>      </tr>
   </thead>    </thead>
   <tbody>    <tbody>
     <tr><td>sun4i</td><td>A10</td><td>8.99.3 and later</td><td><a href="https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/open-source-hardware">Olimex A10-OLinuXino-LIME</a><td></td></tr>      <tr><td>sun4i</td><td>A10</td><td>9.0</td><td><a href="https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/open-source-hardware">Olimex A10-OLinuXino-LIME</a><td></td></tr>
     <tr><td>sun5i</td><td>A10s</td><td>-</td><td></td></tr>      <tr><td>sun5i</td><td>A10s</td><td>-</td><td></td></tr>
     <tr><td>sun5i</td><td>A13</td><td>8.99.2 and later</td><td><a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware">Olimex A13-OLinuXino</a>, <a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/open-source-hardware">Olimex A13-OLinuXino-MICRO</a></td></tr>      <tr><td>sun5i</td><td>A13</td><td>9.0</td><td><a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware">Olimex A13-OLinuXino</a>, <a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/open-source-hardware">Olimex A13-OLinuXino-MICRO</a></td></tr>
     <tr><td>sun5i</td><td>GR8</td><td>8.99.5</td><td><a href="https://getchip.com/pages/chippro">C.H.I.P. Pro</a></td><td></td></tr>      <tr><td>sun5i</td><td>GR8</td><td>9.0</td><td><a href="https://getchip.com/pages/chippro">C.H.I.P. Pro</a></td><td></td></tr>
     <tr><td>sun5i</td><td>R8</td><td>8.99.2 and later</td><td><a href="https://getchip.com/pages/chip">C.H.I.P.</a>, <a href="https://getchip.com/pages/pocketchip">Pocket C.H.I.P.</a></td><td></td></tr>      <tr><td>sun5i</td><td>R8</td><td>9.0</td><td><a href="https://getchip.com/pages/chip">C.H.I.P.</a>, <a href="https://getchip.com/pages/pocketchip">Pocket C.H.I.P.</a></td><td></td></tr>
     <tr><td>sun6i</td><td>A31</td><td>7.0 and later</td><td><a href="http://linux-sunxi.org/Merrii_Hummingbird_A31">Merrii Hummingbird A31</a></td><td></td></tr>      <tr><td>sun6i</td><td>A31</td><td>7.0</td><td><a href="http://linux-sunxi.org/Merrii_Hummingbird_A31">Merrii Hummingbird A31</a></td><td></td></tr>
     <tr><td>sun6i</td><td>A31s</td><td>-</td><td></td><td></td></tr>      <tr><td>sun6i</td><td>A31s</td><td>-</td><td></td><td></td></tr>
     <tr><td>sun7i</td><td>A20</td><td>7.0 and later</td><td><a href="https://linux-sunxi.org/Cubietech_Cubieboard2">Cubietech Cubieboard 2</a>, <a href="https://linux-sunxi.org/Cubietruck">Cubietech Cubietruck</a>, <a href="http://linux-sunxi.org/LeMaker_Banana_Pi">LeMaker Banana Pi</a></td><td></td></tr>      <tr><td>sun7i</td><td>A20</td><td>7.0</td><td><a href="https://linux-sunxi.org/Cubietech_Cubieboard2">Cubietech Cubieboard 2</a>, <a href="https://linux-sunxi.org/Cubietruck">Cubietech Cubietruck</a>, <a href="http://linux-sunxi.org/LeMaker_Banana_Pi">LeMaker Banana Pi</a></td><td></td></tr>
     <tr><td>sun8i</td><td>A23</td><td>-</td><td></td></tr>      <tr><td>sun8i</td><td>A23</td><td>-</td><td></td></tr>
     <tr><td>sun8i</td><td>A33</td><td>-</td><td><a href="https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware">Olimex A33-OLinuXino</a></td></tr>      <tr><td>sun8i</td><td>A33</td><td>-</td><td><a href="https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware">Olimex A33-OLinuXino</a></td></tr>
     <tr><td>sun8i</td><td>R40</td><td>-</td><td><a href="http://www.banana-pi.org/m2u.html">Sinovoip Banana Pi BPI-M2U</a></td></tr>      <tr><td>sun8i</td><td>R40</td><td>-</td><td><a href="http://www.banana-pi.org/m2u.html">Sinovoip Banana Pi BPI-M2U</a></td></tr>
     <tr><td>sun8i</td><td>A83T</td><td>8.0 and later</td><td><a href="http://www.banana-pi.org/m3.html">Sinovoip Banana Pi BPI-M3</a></td><td></td></tr>      <tr><td>sun8i</td><td>A83T</td><td>8.0</td><td><a href="http://www.banana-pi.org/m3.html">Sinovoip Banana Pi BPI-M3</a></td><td></td></tr>
     <tr><td>sun8i</td><td>H2+</td><td>8.0 and later</td><td><a href="http://www.orangepi.org/orangepizero/">Xunlong Orange Pi Zero</a></td><td></td></tr>      <tr><td>sun8i</td><td>H2+</td><td>8.0</td><td><a href="http://www.orangepi.org/orangepizero/">Xunlong Orange Pi Zero</a></td><td></td></tr>
     <tr><td>sun8i</td><td>H3</td><td>8.0 and later</td><td><a href="http://nanopi.io/nanopi-neo.html">FriendlyARM NanoPi NEO</a>, <a href="http://www.orangepi.org/orangepiplus2e/">Xunlong Orange Pi Plus 2E</a></td><td></td></tr>      <tr><td>sun8i</td><td>H3</td><td>8.0</td><td><a href="http://nanopi.io/nanopi-neo.html">FriendlyARM NanoPi NEO</a>, <a href="http://www.orangepi.org/orangepiplus2e/">Xunlong Orange Pi Plus 2E</a></td><td></td></tr>
     <tr><td>sun8i</td><td>V3s</td><td>-</td><td><a href="https://www.indiegogo.com/projects/licheepi-zero-6-extensible-linux-module-on-finger-wifi-diy#/">Lichee Pi Zero</a></td><td></td></tr>      <tr><td>sun8i</td><td>V3s</td><td>-</td><td><a href="https://www.indiegogo.com/projects/licheepi-zero-6-extensible-linux-module-on-finger-wifi-diy#/">Lichee Pi Zero</a></td><td></td></tr>
     <tr><td>sun9i</td><td>A80</td><td>8.0 and later</td><td><a href="http://linux-sunxi.org/Cubietech_Cubieboard4">Cubietech Cubieboard 4</a></td><td></td></tr>      <tr><td>sun9i</td><td>A80</td><td>8.0</td><td><a href="http://linux-sunxi.org/Cubietech_Cubieboard4">Cubietech Cubieboard 4</a></td><td></td></tr>
     <tr><td>sun50i</td><td>A64</td><td>8.99.2 and later</td><td><a href="https://www.pine64.org/?page_id=1194">Pine64</a>, <a href="https://www.pine64.org/?page_id=3707">Pinebook</a></td><td></td></tr>      <tr><td>sun50i</td><td>A64</td><td>9.0</td><td><a href="https://www.pine64.org/?page_id=1194">Pine64</a>, <a href="https://www.pine64.org/?page_id=3707">Pinebook</a></td><td></td></tr>
     <tr><td>sun50i</td><td>H5</td><td>8.99.4 and later</td><td><a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=180">FriendlyARM NanoPi NEO2, <a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=196">FriendlyARM NanoPi NEO Plus2</a></td><td></td></tr>      <tr><td>sun50i</td><td>H5</td><td>9.0</td><td><a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=180">FriendlyARM NanoPi NEO2, <a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=196">FriendlyARM NanoPi NEO Plus2</a></td><td></td></tr>
     <tr><td>sun50i</td><td>H6</td><td>8.99.14 and later</td><td><a href="http://www.orangepi.org/OrangePiOneplus/">Orange Pi One Plus</a>, <a href="https://www.pine64.org/?product_cat=pine-h64-boards">Pine H64</a></td></tr>      <tr><td>sun50i</td><td>H6</td><td>9.0</td><td><a href="http://www.orangepi.org/OrangePiOneplus/">Orange Pi One Plus</a>, <a href="https://www.pine64.org/?product_cat=pine-h64-boards">Pine H64</a></td></tr>
   </tbody>    </tbody>
 </table>  </table>
   
   
 # Supported hardware  # Supported hardware
   
 Please refer to the [SUNXI kernel config](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/SUNXI) for the most up-to-date list of supported hardware.  Please refer to the [GENERIC (32-bit)](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/GENERIC) or [GENERIC64 (64-bit)](https://nxr.netbsd.org/xref/src/sys/arch/evbarm/conf/GENERIC64) kernel configs for the most up-to-date list of supported hardware.
   
 <table>  <table>
   <thead>    <thead>
Line 57  Please refer to the [SUNXI kernel config Line 57  Please refer to the [SUNXI kernel config
   </thead>    </thead>
   <tbody>    <tbody>
     <tr><td>Audio codec</td><td>Yes</td><td>Supported on sun4i, sun5i, sun6i, sun7i, sun8i-h2+, sun8i-h3, sun50i-h5, sun50i-a64</td></tr>      <tr><td>Audio codec</td><td>Yes</td><td>Supported on sun4i, sun5i, sun6i, sun7i, sun8i-h2+, sun8i-h3, sun50i-h5, sun50i-a64</td></tr>
       <tr><td>CAN controller</td><td>Yes</td><td></td></tr>
     <tr><td>Crypto engine</td><td>-</td><td></td></tr>      <tr><td>Crypto engine</td><td>-</td><td></td></tr>
     <tr><td>CSI</td><td>-</td><td></td></tr>      <tr><td>CSI</td><td>-</td><td></td></tr>
     <tr><td>DMA</td><td>Yes</td><td></td></tr>      <tr><td>DMA</td><td>Yes</td><td></td></tr>
Line 76  Please refer to the [SUNXI kernel config Line 77  Please refer to the [SUNXI kernel config
     <tr><td>RTC</td><td>Yes</td><td></td></tr>      <tr><td>RTC</td><td>Yes</td><td></td></tr>
     <tr><td>SATA</td><td>Yes</td><td></td></tr>      <tr><td>SATA</td><td>Yes</td><td></td></tr>
     <tr><td>SD/MMC</td><td>Yes</td><td></td></tr>      <tr><td>SD/MMC</td><td>Yes</td><td></td></tr>
     <tr><td>SMP</td><td>Yes</td><td>32-bit only. Uses PSCI support in firmware</td></tr>      <tr><td>SMP</td><td>Yes</td><td></td></tr>
     <tr><td>SPDIF</td><td>-</td><td></td></tr>      <tr><td>SPDIF</td><td>-</td><td></td></tr>
     <tr><td>SPI</td><td>Yes</td><td></td></tr>      <tr><td>SPI</td><td>Yes</td><td></td></tr>
     <tr><td>Thermal sensors</td><td>Yes</td><td></td></tr>      <tr><td>Thermal sensors</td><td>Yes</td><td></td></tr>
Line 91  Please refer to the [SUNXI kernel config Line 92  Please refer to the [SUNXI kernel config
   
 # Installation  # Installation
   
 - Download or build **armv7.img** (32-bit) or **arm64.img** (64-bit) from NetBSD -current  - Download or build **armv7.img** (32-bit) or **arm64.img** (64-bit) from NetBSD 9.0 or later
 - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**  - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**
 - Install a board-specific U-Boot (2017.07 or later) from pkgsrc to the SD card: **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**  - Install a board-specific U-Boot (2018.05 or later) from pkgsrc to the SD card
     (the `u-boot-sunxi-with-spl.bin`-s are provided by `sysutils/u-boot-<boardname>` packages):
     **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**
   
   If your SoC has a SATA controller and you would like to install on
   an hard disk and use a SD card only for u-boot please give a look
   to
   [[NetBSD/evbarm install via sysinst(8) on a SATA hard disk, USB stick or (u)SD card|ports/evbarm/install_using_sysinst]].
   
 # Tips and tricks  # Tips and tricks
   
Line 104  On some television models, the borders o Line 112  On some television models, the borders o
     setenv video-mode sunxi:1280x720-24,overscan_x=32,overscan_y=20      setenv video-mode sunxi:1280x720-24,overscan_x=32,overscan_y=20
     saveenv      saveenv
     reset      reset
   
   ## Pinebook function keys
   
   The sleep (Fn+Esc), home (Fn+F1), volume down (Fn+F3), volume up (Fn+F4), and mute (Fn+F5) keys on the keyboard are mapped to uhid(4) devices.
   
   Create the following config file:
   
   [[!template  id=filecontent name="/etc/usbhidaction.conf" text="""
   Consumer:Consumer_Control.Consumer:Volume_Up                    1
           mixerctl -n -w outputs.master++
   Consumer:Consumer_Control.Consumer:Volume_Down                  1
           mixerctl -n -w outputs.master--
   Consumer:Consumer_Control.Consumer:Mute                         1
           mixerctl -n -w outputs.mute++
   Consumer:Consumer_Control.Consumer:AC_Home                      1
           /etc/powerd/scripts/hotkey_button AC_Home pressed
   Generic_Desktop:System_Control.Generic_Desktop:System_Sleep     1
           /etc/powerd/scripts/sleep_button System_Sleep pressed
   """]]
   
   Then start two copies of usbhidaction:
   
   [[!template  id=programlisting text="""
   # /usr/bin/usbhidaction -c /etc/usbhidaction.conf -f /dev/uhid0 -i -p /var/run/usbhidaction-uhid0.pid 
   # /usr/bin/usbhidaction -c /etc/usbhidaction.conf -f /dev/uhid1 -i -p /var/run/usbhidaction-uhid1.pid 
   """]]
   
   ## Pinebook keyboard
   
   The new 11" 1080p model has a slightly different keyboard layout to the 14".
   Using wscons it works perfectly, but using X the \ key next to left shift will display > when pressed.
   To solve this, you need to change the keyboard layout to altgr-intl. This can be done system wide by creating the file:
   
   [[!template  id=filecontent name="/etc/X11/xorg.conf.d/00-system-keyboard.conf" text="""
   Section "InputDevice"
           Identifier "Pinebook 1080p keyboard"
           Driver     "kbd"
           Option     "XkbLayout"  "us"
           Option     "XkbVariant" "altgr-intl"
   EndSection
   """]]
   
   ## Pinebook touchpad
   
   To fix jittery touch input on the touchpad, you can adjust the input sensitivity by creating the file:
   
   [[!template  id=filecontent name="/etc/X11/xorg.conf.d/00-system-touchpad.conf" text="""
   Section "InputDevice"
           Identifier "Pinebook touchpad"    
           Driver "mouse"
           Option "AccelerationProfile" "2"
           Option "AdaptiveDeceleration" "1"
           Option "ConstantDeceleration" "2.4" # Pinebook 14"
           #Option "ConstantDeceleration" "1.2" # Pinebook 11"
   EndSection
   """]]
   
   ## Pinebook screen
   
   X11 currently cannot work out the size of the screen, resulting in a very small DPI on a very small screen.
   This file configures X to use an 11.6" screen, which results in very readable a DPI of 190.
   
   [[!template  id=filecontent name="/etc/X11/xorg.conf.d/01-pinebook-11-screen.conf" text="""
   Section "Monitor"
           Identifier      "Pinebook 11.6 inch monitor"
           DisplaySize     256.8 144.5     # millimeters, 11.6 inch screen
   EndSection
   
   Section "Screen"
           Identifier      "Default Screen"
           Monitor         "Pinebook 11.6 inch monitor"
   EndSection
   """]]
   
   
   # Links
   
   - [[NetBSD/evbarm install via sysinst(8) on a SATA hard disk, USB stick or (u)SD card|ports/evbarm/install_using_sysinst]]

Removed from v.1.89  
changed lines
  Added in v.1.104


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb