Diff for /wikisrc/ports/evbarm/allwinner.mdwn between versions 1.70 and 1.87

version 1.70, 2017/10/20 22:32:20 version 1.87, 2018/05/06 11:29:50
Line 22  NetBSD supports many boards based on All Line 22  NetBSD supports many boards based on All
   <tbody>    <tbody>
     <tr><td>sun4i</td><td>A10</td><td>8.99.3 and later</td><td><a href="https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/open-source-hardware">Olimex A10-OLinuXino-LIME</a><td></td></tr>      <tr><td>sun4i</td><td>A10</td><td>8.99.3 and later</td><td><a href="https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/open-source-hardware">Olimex A10-OLinuXino-LIME</a><td></td></tr>
     <tr><td>sun5i</td><td>A10s</td><td>-</td><td></td></tr>      <tr><td>sun5i</td><td>A10s</td><td>-</td><td></td></tr>
     <tr><td>sun5i</td><td>A13</td><td>8.99.2 and later</td><td></td></tr>      <tr><td>sun5i</td><td>A13</td><td>8.99.2 and later</td><td><a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware">Olimex A13-OLinuXino</a>, <a href="https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/open-source-hardware">Olimex A13-OLinuXino-MICRO</a></td></tr>
     <tr><td>sun5i</td><td>GR8</td><td>8.99.2 and later</td><td><a href="https://getchip.com/pages/chippro">C.H.I.P. Pro</a></td><td></td></tr>      <tr><td>sun5i</td><td>GR8</td><td>8.99.5</td><td><a href="https://getchip.com/pages/chippro">C.H.I.P. Pro</a></td><td></td></tr>
     <tr><td>sun5i</td><td>R8</td><td>8.99.2 and later</td><td><a href="https://getchip.com/pages/chip">C.H.I.P.</a>, <a href="https://getchip.com/pages/pocketchip">Pocket C.H.I.P.</a></td><td></td></tr>      <tr><td>sun5i</td><td>R8</td><td>8.99.2 and later</td><td><a href="https://getchip.com/pages/chip">C.H.I.P.</a>, <a href="https://getchip.com/pages/pocketchip">Pocket C.H.I.P.</a></td><td></td></tr>
     <tr><td>sun6i</td><td>A31</td><td>7.0 and later</td><td><a href="http://linux-sunxi.org/Merrii_Hummingbird_A31">Merrii Hummingbird A31</a></td><td></td></tr>      <tr><td>sun6i</td><td>A31</td><td>7.0 and later</td><td><a href="http://linux-sunxi.org/Merrii_Hummingbird_A31">Merrii Hummingbird A31</a></td><td></td></tr>
     <tr><td>sun6i</td><td>A31s</td><td>-</td><td></td><td></td></tr>      <tr><td>sun6i</td><td>A31s</td><td>-</td><td></td><td></td></tr>
     <tr><td>sun7i</td><td>A20</td><td>7.0 and later</td><td><a href="https://linux-sunxi.org/Cubietech_Cubieboard2">Cubietech Cubieboard 2</a>, <a href="https://linux-sunxi.org/Cubietruck">Cubietech Cubietruck</a>, <a href="http://linux-sunxi.org/LeMaker_Banana_Pi">LeMaker Banana Pi</a></td><td></td></tr>      <tr><td>sun7i</td><td>A20</td><td>7.0 and later</td><td><a href="https://linux-sunxi.org/Cubietech_Cubieboard2">Cubietech Cubieboard 2</a>, <a href="https://linux-sunxi.org/Cubietruck">Cubietech Cubietruck</a>, <a href="http://linux-sunxi.org/LeMaker_Banana_Pi">LeMaker Banana Pi</a></td><td></td></tr>
     <tr><td>sun8i</td><td>A23</td><td>-</td><td></td></tr>      <tr><td>sun8i</td><td>A23</td><td>-</td><td></td></tr>
     <tr><td>sun8i</td><td>A33</td><td>-</td><td></td></tr>      <tr><td>sun8i</td><td>A33</td><td>-</td><td><a href="https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware">Olimex A33-OLinuXino</a></td></tr>
       <tr><td>sun8i</td><td>R40</td><td>-</td><td><a href="http://www.banana-pi.org/m2u.html">Sinovoip Banana Pi BPI-M2U</a></td></tr>
     <tr><td>sun8i</td><td>A83T</td><td>8.0 and later</td><td><a href="http://www.banana-pi.org/m3.html">Sinovoip Banana Pi BPI-M3</a></td><td></td></tr>      <tr><td>sun8i</td><td>A83T</td><td>8.0 and later</td><td><a href="http://www.banana-pi.org/m3.html">Sinovoip Banana Pi BPI-M3</a></td><td></td></tr>
     <tr><td>sun8i</td><td>H2+</td><td>8.0 and later</td><td><a href="http://www.orangepi.org/orangepizero/">Xunlong Orange Pi Zero</a></td><td></td></tr>      <tr><td>sun8i</td><td>H2+</td><td>8.0 and later</td><td><a href="http://www.orangepi.org/orangepizero/">Xunlong Orange Pi Zero</a></td><td></td></tr>
     <tr><td>sun8i</td><td>H3</td><td>8.0 and later</td><td><a href="http://nanopi.io/nanopi-neo.html">FriendlyARM NanoPi NEO</a>, <a href="http://www.orangepi.org/orangepiplus2e/">Xunlong Orange Pi Plus 2E</a></td><td></td></tr>      <tr><td>sun8i</td><td>H3</td><td>8.0 and later</td><td><a href="http://nanopi.io/nanopi-neo.html">FriendlyARM NanoPi NEO</a>, <a href="http://www.orangepi.org/orangepiplus2e/">Xunlong Orange Pi Plus 2E</a></td><td></td></tr>
       <tr><td>sun8i</td><td>V3s</td><td>-</td><td><a href="https://www.indiegogo.com/projects/licheepi-zero-6-extensible-linux-module-on-finger-wifi-diy#/">Lichee Pi Zero</a></td><td></td></tr>
     <tr><td>sun9i</td><td>A80</td><td>8.0 and later</td><td><a href="http://linux-sunxi.org/Cubietech_Cubieboard4">Cubietech Cubieboard 4</a></td><td></td></tr>      <tr><td>sun9i</td><td>A80</td><td>8.0 and later</td><td><a href="http://linux-sunxi.org/Cubietech_Cubieboard4">Cubietech Cubieboard 4</a></td><td></td></tr>
     <tr><td>sun50i</td><td>A64</td><td>8.99.2 and later</td><td><a href="https://www.pine64.org/?page_id=1194">Pine64</a>, <a href="https://www.pine64.org/?page_id=3707">Pinebook</a></td><td>aarch32 mode</td></tr>      <tr><td>sun50i</td><td>A64</td><td>8.99.2 and later</td><td><a href="https://www.pine64.org/?page_id=1194">Pine64</a>, <a href="https://www.pine64.org/?page_id=3707">Pinebook</a></td><td></td></tr>
     <tr><td>sun50i</td><td>H5</td><td>8.99.4 and later</td><td><a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=180">FriendlyARM NanoPi NEO2</td><td>aarch32 mode</td></tr>      <tr><td>sun50i</td><td>H5</td><td>8.99.4 and later</td><td><a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=180">FriendlyARM NanoPi NEO2, <a href="http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=196">FriendlyARM NanoPi NEO Plus2</a></td><td></td></tr>
     <tr><td>sun50i</td><td>H6</td><td>-</td><td></td></tr>      <tr><td>sun50i</td><td>H6</td><td>8.99.14 and later</td><td><a href="http://www.orangepi.org/OrangePiOneplus/">Orange Pi One Plus</a>, <a href="https://www.pine64.org/?product_cat=pine-h64-boards">Pine H64</a></td></tr>
   </tbody>    </tbody>
 </table>  </table>
   
Line 54  Please refer to the [SUNXI kernel config Line 56  Please refer to the [SUNXI kernel config
     </tr>      </tr>
   </thead>    </thead>
   <tbody>    <tbody>
     <tr><td>Audio codec</td><td>Yes</td><td>Supported on sun4i, sun5i, sun6i, sun8i-h2+, sun8i-h3</td></tr>      <tr><td>Audio codec</td><td>Yes</td><td>Supported on sun4i, sun5i, sun6i, sun7i, sun8i-h2+, sun8i-h3, sun50i-h5</td></tr>
     <tr><td>Crypto engine</td><td>-</td><td></td></tr>      <tr><td>Crypto engine</td><td>-</td><td></td></tr>
     <tr><td>CSI</td><td>-</td><td></td></tr>      <tr><td>CSI</td><td>-</td><td></td></tr>
     <tr><td>DMA</td><td>Yes</td><td></td></tr>      <tr><td>DMA</td><td>Yes</td><td></td></tr>
     <tr><td>Fast Ethernet (sun4i/sun7i)</td><td>Yes</td><td></td></tr>      <tr><td>Fast Ethernet (sun4i/sun5i/sun7i)</td><td>Yes</td><td></td></tr>
     <tr><td>Framebuffer</td><td>Yes</td><td>Uses simplefb configured by bootloader</td></tr>      <tr><td>Framebuffer</td><td>Yes</td><td>Uses simplefb configured by bootloader</td></tr>
     <tr><td>Gigabit Ethernet (sun6i/sun7i/sun9i)</td><td>Yes</td><td></td></tr>      <tr><td>Gigabit Ethernet (sun6i/sun7i/sun9i)</td><td>Yes</td><td></td></tr>
     <tr><td>Gigabit Ethernet (sun8i/sun50i)</td><td>Yes</td><td></td></tr>      <tr><td>Gigabit Ethernet (sun8i/sun50i)</td><td>Yes</td><td></td></tr>
Line 67  Please refer to the [SUNXI kernel config Line 69  Please refer to the [SUNXI kernel config
     <tr><td>I2C</td><td>Yes</td><td></td></tr>      <tr><td>I2C</td><td>Yes</td><td></td></tr>
     <tr><td>I2S/PCM</td><td>-</td><td></td></tr>      <tr><td>I2S/PCM</td><td>-</td><td></td></tr>
     <tr><td>IR transceiver</td><td>-</td><td></td></tr>      <tr><td>IR transceiver</td><td>-</td><td></td></tr>
     <tr><td>NAND</td><td>-</td><td></td></tr>      <tr><td>NAND</td><td>Yes</td><td></td></tr>
     <tr><td>P2WI/RSB</td><td>Yes</td><td></td></tr>      <tr><td>P2WI/RSB</td><td>Yes</td><td></td></tr>
     <tr><td>PWM</td><td>-</td><td></td></tr>      <tr><td>PCIe</td><td>-</td><td>H6</td></tr>
       <tr><td>PWM</td><td>Yes</td><td></td></tr>
     <tr><td>RTC</td><td>Yes</td><td></td></tr>      <tr><td>RTC</td><td>Yes</td><td></td></tr>
     <tr><td>SATA</td><td>Yes</td><td></td></tr>      <tr><td>SATA</td><td>Yes</td><td></td></tr>
     <tr><td>SD/MMC</td><td>Yes</td><td></td></tr>      <tr><td>SD/MMC</td><td>Yes</td><td></td></tr>
     <tr><td>SMP</td><td>Yes</td><td>Uses PSCI support in firmware</td></tr>      <tr><td>SMP</td><td>Yes</td><td>32-bit only. Uses PSCI support in firmware</td></tr>
     <tr><td>SPDIF</td><td>-</td><td></td></tr>      <tr><td>SPDIF</td><td>-</td><td></td></tr>
     <tr><td>SPI</td><td>-</td><td></td></tr>      <tr><td>SPI</td><td>-</td><td></td></tr>
     <tr><td>Thermal sensors</td><td>Yes</td><td></td></tr>      <tr><td>Thermal sensors</td><td>Yes</td><td></td></tr>
     <tr><td>Touch screen</td><td>Yes</td><td></td></tr>      <tr><td>Touch screen</td><td>Yes</td><td></td></tr>
     <tr><td>UART</td><td>Yes</td><td></td></tr>      <tr><td>UART</td><td>Yes</td><td></td></tr>
     <tr><td>USB 2.0</td><td>Yes</td><td></td></tr>      <tr><td>USB 2.0</td><td>Yes</td><td></td></tr>
       <tr><td>USB 3.0</td><td>Yes</td><td></td></tr>
     <tr><td>USB OTG</td><td>Experimental</td><td></td></tr>      <tr><td>USB OTG</td><td>Experimental</td><td></td></tr>
     <tr><td>Watchdog timer</td><td>Yes</td><td></td></tr>      <tr><td>Watchdog timer</td><td>Yes</td><td></td></tr>
   </tbody>    </tbody>
Line 87  Please refer to the [SUNXI kernel config Line 91  Please refer to the [SUNXI kernel config
   
 # Installation  # Installation
   
 - Download or build **armv7.img** from NetBSD -current  - Download or build **armv7.img** (32-bit) or **arm64.img** (64-bit) from NetBSD -current
 - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**  - Write the image to disk: **dd if=armv7.img of=/dev/rld0d bs=1m conv=sync**
 - Install a board-specific U-Boot (2017.07 or later) from pkgsrc to the SD card: **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**  - Install a board-specific U-Boot (2017.07 or later) from pkgsrc to the SD card: **dd if=/usr/pkg/share/u-boot/&lt;boardname&gt;/u-boot-sunxi-with-spl.bin of=/dev/rld0d bs=1k seek=8 conv=sync**
   
   # Tips and tricks
   
   ## Video overscan compensation
   
   On some television models, the borders of the screen may be cut off. If your television doesn't have an option to disable overscan, you can enable overscan compensation by entering the following commands at the U-Boot prompt:
   
       setenv video-mode sunxi:1280x720-24,overscan_x=32,overscan_y=20
       saveenv
       reset

Removed from v.1.70  
changed lines
  Added in v.1.87


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb