[BACK]Return to allwinner.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports / evbarm

Diff for /wikisrc/ports/evbarm/allwinner.mdwn between versions 1.53 and 1.54

version 1.53, 2015/08/10 09:48:26 version 1.54, 2015/12/09 17:29:39
Line 70  NetBSD 7.0 has support for A20 and A31 S Line 70  NetBSD 7.0 has support for A20 and A31 S
   
 ## A20 / A31 based boards  ## A20 / A31 based boards
   
 * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/* such as *beagleboard.img* from netbsd-7, or *armv7.img* from HEAD  * Start with an ARMv7 image from *evbarm-earmv7hf/binary/gzimg/armv7.img.gz* from
   NetBSD 7.0
 * Download a U-Boot build for your board  * Download a U-Boot build for your board
   * Download the correct build from the linux-sunxi web site <http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi-mainline/u-boot-sunxi-mainline-latest/>.    * Download the correct build from the linux-sunxi web site <http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi-mainline/u-boot-sunxi-mainline-latest/>.
   * Decompress the image via [[!template id=man name="gunzip" section="1"]]:
   [[!template  id=programlisting text="""
   # gunzip armv7.img.gz
   """]]
 * Write the *u-boot-sunxi-with-spl.bin* loader to the empty space at the start of the base image:  * Write the *u-boot-sunxi-with-spl.bin* loader to the empty space at the start of the base image:
 [[!template  id=programlisting text="""  [[!template  id=programlisting text="""
 # dd if=u-boot-sunxi-with-spl.bin of=beagleboard.img bs=1k seek=8 conv=notrunc  # dd if=u-boot-sunxi-with-spl.bin of=armv7.img bs=1k seek=8 conv=notrunc
   """]]
   * Write the image to an SD card (e.g.: if the SD card is recognised as *sd0* -
   please check the [[!template id=man name="dmesg" section="8"]] output to be
   sure!):
   [[!template  id=programlisting text="""
   # dd if=armv7.img of=/dev/rsd0d bs=1m
   """]]
   * Copy the kernel (*netbsd.ub*) for your board to the root of the MS-DOS
   partition on the SD card
   * Prepare a *boot.cmd* file for U-Boot boot loader containing the needed
   instructions regarding how to boot the kernel (basically the *bootargs* that are
   passed to the kernel and how to load the kernel from a device to the RAM and
   then boot it from the memory address):
   [[!template  id=programlisting text="""
   setenv kernel_addr      82000000
   setenv kernel           netbsd.ub
   setenv bootargs         "root=ld0a"
   
   fatload mmc 0:1 ${kernel_addr} ${kernel}
   bootm ${kernel_addr}
 """]]  """]]
 * Write the image to an SD card.  * The *boot.cmd* text file should be converted in a script image - *boot.scr*
 * Copy the kernel (netbsd.ub) for your board to the root of the MS-DOS partition on the SD card.  for U-Boot via [[!template id=man name="mkubootimage" section="1"]]:
 * Create or edit uEnv.txt on the MS-DOS partition:  
 [[!template  id=programlisting text="""  [[!template  id=programlisting text="""
 bootargs=root=ld0a  # mkubootimage -A arm -n armv7 -T script boot.cmd boot.scr
 uenvcmd=mmc dev 0; mmc rescan; fatload mmc 0:1 82000000 netbsd.ub; bootm 82000000  
 """]]  """]]
   * Copy the *boot.scr* to the MS-DOS partition of the SD card
   
 ## A80 based boards  ## A80 based boards
   
Removed from v.1.53  
changed lines
  Added in v.1.54

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb