File:  [NetBSD Developer Wiki] / wikisrc / ports / evbarm.mdwn
Revision 1.92: download - view: text, annotated - select for diffs
Tue Sep 15 07:48:57 2020 UTC (2 months, 2 weeks ago) by nia
Branches: MAIN
CVS tags: HEAD
slightly less obscure board image

    1: [[!template id=port
    2: port="evbarm"
    3: port_alt="arm"
    4: port_var1="earm"
    5: port_var2="earmeb"
    6: port_var3="earmv6hf"
    7: port_var4="earmv7hf"
    8: port_var5="earmv7hfeb"
    9: port_var6="aarch64"
   10: port_var_install_notes="evbarm-earm"
   11: pkg_rel="9.0"
   12: cur_rel="9.0"
   13: future_rel="10.0"
   14: changes_cur="9.0"
   15: changes_future="10.0"
   16: thumbnail="//www.netbsd.org/images/ports/evbarm/beaglebone.jpg"
   17: about="""
   18: NetBSD/evbarm is the port of NetBSD to various systems based on chips
   19: implementing the ARM architecture. The "evb" component is a reference
   20: to evaluation boards, the original target of the port, but this
   21: is no longer relevant - NetBSD/evbarm now runs on a range of
   22: hardware based on APCI or devicetrees, including a range of development
   23: boards, powerful servers, virtual machines, and even some laptops.
   24: """
   25: supported_hardware="""
   26: ### CPU types
   27: 
   28: Various CPU variants are supported, e.g:
   29: 
   30: - evbarm-earmv6hf - ARMv6 with EABI and hardware floating point, e.g.
   31:   the original Raspberry Pi.
   32: - evbarm-earmv7hf - ARMv7 with EABI and hardware floating point, e.g.
   33:   most recent and common 32-bit ARM boards.
   34: - evbarm-earmv7hfeb - Same as the above, but with the CPU running in
   35:   big endian mode.
   36: - evbarm-aarch64 - 64-bit ARMv8
   37: - evbarm-aarch64eb - Same as the above, but with the CPU running in
   38:   big endian mode.
   39: 
   40: Since NetBSD 9.0, 64-bit ARM processors are supported (referred to here
   41: as aarch64). These run with fully 64-bit kernels and userland. Running
   42: 32-bit ARM binaries is also supported with `compat32`.
   43: 
   44: evbarm variants are little endian unless otherwise stated. NetBSD provides
   45: big endian images primarily for testing purposes and to ensure that the code
   46: is endian-clean.
   47: 
   48: ### Board specific information (often including installation information)
   49: 
   50:  - [[Allwinner sunxi family SoCs|Allwinner]]
   51:  - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]
   52:  - [[NVIDIA Tegra|Tegra]]
   53:  - [[ODROID C1 and C1+|ODROID-C1]]
   54:  - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]
   55:  - [[RockChip SoCs|RockChip]]
   56:  - [[Terasic DE0 Nano-SoC|Cyclone5]]
   57: 
   58: **NOTE**: This list is incomplete. For a full list of supported boards, please see the list of [32-bit](https://github.com/NetBSD/src/blob/netbsd-9/sys/arch/evbarm/conf/GENERIC#L18) and [64-bit](https://github.com/NetBSD/src/blob/netbsd-9/sys/arch/evbarm/conf/GENERIC64#L20) device trees.
   59: 
   60: ### QEMU
   61: 
   62: See the [[NetBSD/evbarm under QEMU|qemu_arm]] page for instructions on how to get started with QEMU.
   63: """
   64: additional="""
   65: ### armbsd.org builds
   66: 
   67: NetBSD developer Jared McNeill provides [builds of NetBSD 9 and -current for a vast variety of hardware.](https://www.armbsd.org/)   In addition to the standard build, these images have board-specific U-Boot contents.  See also /usr/pkgsrc/sysutils/u-boot*.
   68: 
   69: ### anita
   70: 
   71: anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.
   72: 
   73:  - evbarm-earmv7hf uses 'qemu-system-arm -M vexpress-a15'
   74:  - evbarm-aarch64 uses 'qemu-system-aarch64 -M virt'
   75:  - Information on how to test emulated versions of other specific hardware is welcome.
   76: """
   77: ]]
   78: 
   79: [[!tag tier1port]]

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb