File:  [NetBSD Developer Wiki] / wikisrc / ports / evbarm.mdwn
Revision 1.5: download - view: text, annotated - select for diffs
Mon Jan 7 17:30:25 2013 UTC (10 years, 2 months ago) by wiki
Branches: MAIN
CVS tags: HEAD
web commit by jakllsch: Add small blurbs about Raspberry Pi and BeagleBone.

[[!template id=port
port="evbarm"
cur_rel="6.0"  
future_rel="7.0"
changes_cur="6.0"
changes_future="7.0"
thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
about="""
NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
boards based on CPUs implementing the ARM architecture. NetBSD/evbarm also
supports some specific embedded system products based on prototype board
designs.

Jason Thorpe is the maintainer of NetBSD/evbarm.
"""
supported_hardware="""
### Raspberry Pi Foundation **Raspberry Pi**
The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.

### BeagleBoard.org **BeagleBone**
The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard.

### Technologic Systems **TS-7200**

The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer
intended as a general purpose core for real embedded applications. The TS-7200
uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa)
bus and can either boot to CompactFlash or onboard flash. The board also has
general purpose digital IO and optional multichannel analog-to-digital
converters. More information on the TS-7200 can be found at [Technologic
Systems](http://www.embeddedarm.com/epc/ts7200-spec-h.html).

Support for the TS-7200 was written by Jesse Off

* On-CPU RS232 UARTs (2) (_epcom_)
* On-CPU 10/100 Ethernet MAC (_epe_)
* CompactFlash socket (_wdc_)
* USB 1.1 ports (2) (_ohci_)
* Watchdog timer on CPLD (_tspld_)
* TMP124 high precision temperature sensor via sysctl
* 64Hz system clock from on-CPU timers (_epclk_)
* HD44780 2x24 text mode LCD (_tslcd_)
* 4x4 16 button matrix keypad (_wskbd_)
* TS-5620 battery backed RTC daughter-card (_tsrtc_)
* 1,2,4 port serial TS-SER daughter cards (_com_)
* Up to 4 10Mb TS-ETH10 daughter cards (_tscs_)
* Other devices inserted into the PC/104 (_isa_) expansion slot

### ARM, Ltd. **Integrator**

The Integrator/AP is an ATX form-factor board that is used for development of
ARM processor-based designs. It supports up to four processors on plug-in core
modules, and provides clocks, a bus interface, and interrupt support. The
Integrator/AP also supports logic modules which provide additional
peripherals, and can accommodate up to three PCI expansion cards. The
Integrator/AP can also be inserted into a CompactPCI backplane.

Support for the Integrator was written by Richard Earnshaw, and contributed by
ARM, Ltd.

 * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
 * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
 * Other devices inserted into the PCI expansion slots

### Intel **IQ31244**

The IQ31244 is a development platform for the Intel **IOP321** I/O Processor
chipset and the Intel **i31244** SATA controller.

Initial support for the IQ31244 was written by Jason Thorpe, and contributed
by Wasabi Systems, Inc.

 * Quad on-board Intel i31244 SATA controllers on the PCI-X bus (_artsata_)
 * On-board Intel i82546EB Gigabit Ethernet on the PCI-X bus (_wm_)
 * On-board NS16550-compatible serial port (_com_)
 * On-chip timers (TMR0 used as system clock)
 * On-chip Application Accelerator Unit (_iopaau_)
 * On-chip watchdog timer (_iopwdog_)
 * On-board compact flash reader (_wdc_)
 * Other devices inserted into the PCI-X expansion slot

### Intel **IQ80310**

The IQ80310 is the reference platform for the Intel **IOP310** I/O Processor
chipset, which is comprised of the i80200 XScale processor and the i80312 I/O
Companion chip.

Support for the IQ80310 was written by Jason Thorpe and Allen Briggs, and
contributed by Wasabi Systems, Inc.

 * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
 * On-board timer in the CPLD (used as system clock)
 * On-board NS16550-compatible serial ports (_com_)
 * Other devices inserted into the PCI expansion slots

### Intel **IQ80321**

The IQ80321 is the reference platform for the Intel **IOP321** I/O Processor
(i80321 XScale processor).

Support for the IQ80321 was written by Jason Thorpe, and contributed by Wasabi
Systems, Inc.

 * On-board Intel i82544EI Gigabit Ethernet on the PCI-X bus (_wm_)
 * On-board NS16550-compatible serial port (_com_)
 * On-chip timers (TMR0 used as system clock)
 * On-chip Application Accelerator Unit (_iopaau_)
 * On-chip watchdog timer (_iopwdog_)
 * Other devices inserted into the PCI-X expansion slots

### Team ASA, Inc. **Npwr**

The Npwr is an IOP310-based design targeted at the network-attached storage
space. The Npwr comes in several configurations (single or dual Gigabit
Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board
or as a small server appliance. More information on the Npwr can be found at
the [Team ASA web page](http://www.teamasa.com/).

Support for the Npwr was written by Jason Thorpe and Allen Briggs, and
contributed by Wasabi Systems, Inc.

 * On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_)
 * On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_)
 * On-board timer in the CPLD (used as system clock)
 * On-board NS16550-compatible serial port (_com_)

### Intel **IXM1200**

The IXM1200 is the reference platform for the Intel **IXP1200** Network
Processor.

Support for the IXM1200 was written by Ichiro FUKUHARA and Naoto Shimazaki.

 * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
 * On-board Intel i21555 Non-Transparent PCI-PCI Bridge (_nppb_)
 * On-chip timers (ixpclk0 used as system clock)
 * On-chip serial port (_ixpcom_)

### Samsung **SMDK2410**

The SMDK2410 is the reference platform for the Samsung **S3C2410** processor,
which has an ARM920T core.

More information on the S3C2410 can be found at [Samsung Electronics web page]
(http://www.samsung.com/Products/Semiconductor/MobileSoC/ApplicationProcessor/
ARM9Series/S3C2410/S3C2410.htm).

Support for the SMDK2410 was written by Hiroyuki Bessho, and contributed by
Genetec Corp.

 * On-chip serial ports (_sscom_)
 * On-chip USB host controller (_ohc_)
 * On-chip timers (used as system clock)
 * On-chip SPI (_ssspi_, used for other on-board devices)
 * 240x320 TFT LCD (_lcd_)
 * keyboard. (_sskbd_)

### Samsung **SMDK2800**

The SMDK2800 is the reference platform for the **Samsung S3C2800** processor,
which has an ARM920T core.

S3C2800 has built-in PCI controller, and SMDK2800 has three PCI slots.

Support for the SMDK2800 was written by Hiroyuki Bessho, and contributed by
Fujitsu Component Ltd., and Genetec Corp.

 * On-chip serial ports (_sscom_)
 * On-chip Host-PCI bridge (_sspci_)
 * On-chip timers (used as system clock)
 * Other devices inserted into the PCI slots 

### ADI Engineering **BRH** ("Big Red Head") 

The BRH is an evaluation and development platform for the Intel **i80200**
XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
Chip"). The BRH is capable of both big- and little-endian operation, although
NetBSD currently only supports little-endian operation. More information about
the BRH can be found on [ADI Engineering's web
page](http://www.adiengineering.com/productsBRH.html).

Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
Systems, Inc.

 * On-board NS16550-compatible serial ports (_com_)
 * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
 * On-chip timer on the BECC (used as system clock)
 * Other devices inserted into the PCI slot

The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are
limited to 64M due to the layout of the PCI DMA windows. Users of these
systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
BECC.

### NOVATEC **NTNP425B** ("ZAO425") 

NTNP425B is an evaluation and development platform for the Intel **IXP425**
XScale Core NetworkProcessor. NTNP425B is based on the reference board of
Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation.
Since the library for micro-engine(NPE) offered from Intel Corp. is big-
endian. More information about the **NTNP425B** can be found on [product
catalogue of **NTNP425B**(2.5MB,PDF
file)](http://www.novatec.co.jp/NTNP425BBrochureE.pdf).

Support for the NTNP425B was written by Ichiro FUKUHARA.

 * On-chip timers (_ixpclk0_ used as system clock)
 * On-chip 2 serial port (_ixpcom0_ and _ixpcom1_)
 * Other devices inserted into the PCI/mPCI slot
 * On-chip watchdog timer (_ixpwdog_)

### Intel **DBPXA250** ("Lubbock") 

DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the
Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).

Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed
by Genetec Corp.

 * On-chip timers (_saost_ used as system clock)
 * On-chip 2 serial port (_com_)
 * On-board SMC91C96 ethernet (_sm_)
 * On-board SA-1111 StrongArm companion chip (_sacc_)
 * PS/2 keyboard (_pckbd_)
 * 640x480 LCD (_lcd_)
 * PCMCIA and CF card slots

### Arcom **Viper**

The Arcom Viper is a single board computer based on the PXA255 XScale
processor.

Support for the Arcom Viper was written by Antti Kantee.

 * On-chip timers (_saost_ used as system clock)
 * On-chip serial ports (_com_)
 * On-board SMC91C111 ethernet (_sm_) 

### Atmark Techno **Armadillo-9**

The Armadillo-9 is a single board computer based on the EP9315 processor.

Support for the Armadillo-9 was written by Katsuomi Hamajima.

 * On-CPU RS232 UARTs (2) (_epcom_)
 * On-CPU 10/100 Ethernet MAC (_epe_)
 * system clock from on-CPU timers (_epclk_)
 * CompactFlash socket (_eppcic_)
 * USB 1.1 ports (_ohci_)

### Gumstix, Inc. **gumstix**

The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard
based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now.

Support for the gumstix was written by KIYOHARA Takashi.

 * basix
 * cfstix
 * etherstix
 * netCF
 * netDUO
 * netDUO-mmc
 * netMMC 

When booting, it is necessary to set these with u-boot dynamically.

<pre> > go 0xa0200000 busheader=basix</pre>

 * audiostix
 * console-st (waysmall - STUART)
 * console-hw (waysmall)
 * GPSstix (GPS not test)
 * tweener
"""
aditional="""
  * The [NetBSD Diskless HOWTO](/docs/network/netboot/)
  * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. 
"""
]]
[[!tag tier1port]]


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb