1: [[!template id=port
10: NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
11: boards based on CPUs implementing the ARM architecture. NetBSD/evbarm also
12: supports some specific embedded system products based on prototype board
15: Matt Thomas is the maintainer of NetBSD/evbarm.
17: ### Board specific information
18: - [[BeagleBone and BeagleBone Black|BeagleBone]]
19: - [[Cubieboard 2, Cubietruck, Cubieboard 4, Banana Pi, and other Allwinner boards|Allwinner]]
20: - [[NVIDIA Jetson TK1|Tegra]]
21: - [[ODROID C1 and C1+|ODROID-C1]]
22: - [[Raspberry Pi and Pi 2|Raspberry Pi]]
28: **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.
30: [[!toc startlevel=3]]
32: ### ADI Engineering **BRH** ("Big Red Head")
34: The BRH is an evaluation and development platform for the Intel **i80200**
35: XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
36: Chip"). The BRH is capable of both big- and little-endian operation, although
37: NetBSD currently only supports little-endian operation.
39: Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
40: Systems, Inc.
42: * On-board NS16550-compatible serial ports (_com_)
43: * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
44: * On-chip timer on the BECC (used as system clock)
45: * Other devices inserted into the PCI slot
47: The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are
48: limited to 64M due to the layout of the PCI DMA windows. Users of these
49: systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
52: ### Allwinner Technology A20/A31
53: Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
55: ### Arcom **Viper**
57: The Arcom Viper is a single board computer based on the PXA255 XScale
60: Support for the Arcom Viper was written by Antti Kantee.
62: * On-chip timers (_saost_ used as system clock)
63: * On-chip serial ports (_com_)
64: * On-board SMC91C111 ethernet (_sm_)
66: ### ARM, Ltd. **Integrator**
68: The Integrator/AP is an ATX form-factor board that is used for development of
69: ARM processor-based designs. It supports up to four processors on plug-in core
70: modules, and provides clocks, a bus interface, and interrupt support. The
71: Integrator/AP also supports logic modules which provide additional
72: peripherals, and can accommodate up to three PCI expansion cards. The
73: Integrator/AP can also be inserted into a CompactPCI backplane.
75: Support for the Integrator was written by Richard Earnshaw, and contributed by
76: ARM, Ltd.
78: * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
79: * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
80: * PrimeCell PL181 MultiMedia Card Interface
81: * Other devices inserted into the PCI expansion slots
83: ### Atmark Techno **Armadillo-9**
85: The Armadillo-9 is a single board computer based on the EP9315 processor.
87: Support for the Armadillo-9 was written by Katsuomi Hamajima.
89: * On-CPU RS232 UARTs (2) (_epcom_)
90: * On-CPU 10/100 Ethernet MAC (_epe_)
91: * system clock from on-CPU timers (_epclk_)
92: * CompactFlash socket (_eppcic_)
93: * USB 1.1 ports (_ohci_)
95: ### BeagleBoard.org **BeagleBoard** and **BeagleBoard-xM**
96: The [[BeagleBoard]] is a low-power open-source hardware single-board computer from BeagleBoard.org.
98: ### BeagleBoard.org **BeagleBone** and **BeagleBone Black**
99: The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard.org.
101: ### Gumstix, Inc. **gumstix**
103: The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard
104: based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now.
106: Support for the gumstix was written by KIYOHARA Takashi.
108: * basix
109: * cfstix
110: * etherstix
111: * netCF
112: * netDUO
113: * netDUO-mmc
114: * netMMC
116: When booting, it is necessary to set these with u-boot dynamically.
118: <pre> > go 0xa0200000 busheader=basix</pre>
120: * audiostix
121: * console-st (waysmall - STUART)
122: * console-hw (waysmall)
123: * GPSstix (GPS not test)
124: * tweener
126: ### Hardkernel ODROID-C1 and ODROID-C1+
128: The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.
130: ### Intel **DBPXA250** ("Lubbock")
132: DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the
133: Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).
135: Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed
136: by Genetec Corp.
138: * On-chip timers (_saost_ used as system clock)
139: * On-chip 2 serial port (_com_)
140: * On-board SMC91C96 ethernet (_sm_)
141: * On-board SA-1111 StrongArm companion chip (_sacc_)
142: * PS/2 keyboard (_pckbd_)
143: * 640x480 LCD (_lcd_)
144: * PCMCIA and CF card slots
146: ### Intel **IQ31244**
148: The IQ31244 is a development platform for the Intel **IOP321** I/O Processor
149: chipset and the Intel **i31244** SATA controller.
151: Initial support for the IQ31244 was written by Jason Thorpe, and contributed
152: by Wasabi Systems, Inc.
154: * Quad on-board Intel i31244 SATA controllers on the PCI-X bus (_artsata_)
155: * On-board Intel i82546EB Gigabit Ethernet on the PCI-X bus (_wm_)
156: * On-board NS16550-compatible serial port (_com_)
157: * On-chip timers (TMR0 used as system clock)
158: * On-chip Application Accelerator Unit (_iopaau_)
159: * On-chip watchdog timer (_iopwdog_)
160: * On-board compact flash reader (_wdc_)
161: * Other devices inserted into the PCI-X expansion slot
163: ### Intel **IQ80310**
165: The IQ80310 is the reference platform for the Intel **IOP310** I/O Processor
166: chipset, which is comprised of the i80200 XScale processor and the i80312 I/O
167: Companion chip.
169: Support for the IQ80310 was written by Jason Thorpe and Allen Briggs, and
170: contributed by Wasabi Systems, Inc.
172: * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
173: * On-board timer in the CPLD (used as system clock)
174: * On-board NS16550-compatible serial ports (_com_)
175: * Other devices inserted into the PCI expansion slots
177: ### Intel **IQ80321**
179: The IQ80321 is the reference platform for the Intel **IOP321** I/O Processor
180: (i80321 XScale processor).
182: Support for the IQ80321 was written by Jason Thorpe, and contributed by Wasabi
183: Systems, Inc.
185: * On-board Intel i82544EI Gigabit Ethernet on the PCI-X bus (_wm_)
186: * On-board NS16550-compatible serial port (_com_)
187: * On-chip timers (TMR0 used as system clock)
188: * On-chip Application Accelerator Unit (_iopaau_)
189: * On-chip watchdog timer (_iopwdog_)
190: * Other devices inserted into the PCI-X expansion slots
192: ### Intel **IXM1200**
194: The IXM1200 is the reference platform for the Intel **IXP1200** Network
197: Support for the IXM1200 was written by Ichiro FUKUHARA and Naoto Shimazaki.
199: * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
200: * On-board Intel i21555 Non-Transparent PCI-PCI Bridge (_nppb_)
201: * On-chip timers (ixpclk0 used as system clock)
202: * On-chip serial port (_ixpcom_)
204: ### NOVATEC **NTNP425B** ("ZAO425")
206: NTNP425B is an evaluation and development platform for the Intel **IXP425**
207: XScale Core NetworkProcessor. NTNP425B is based on the reference board of
208: Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation.
209: Since the library for micro-engine(NPE) offered from Intel Corp. is big-
210: endian. More information about the **NTNP425B** can be found on [product
211: catalogue of **NTNP425B**(2.5MB,PDF
214: Support for the NTNP425B was written by Ichiro FUKUHARA.
216: * On-chip timers (_ixpclk0_ used as system clock)
217: * On-chip 2 serial port (_ixpcom0_ and _ixpcom1_)
218: * Other devices inserted into the PCI/mPCI slot
219: * On-chip watchdog timer (_ixpwdog_)
221: ### NVIDIA Tegra K1
222: Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current. The Jetson TK1 board is currently supported.
224: ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**
225: The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported.
227: ### Rockchip PX2/RK3066/RK3188/RK3188+
228: Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel.
230: ### Samsung **SMDK2410**
232: The SMDK2410 is the reference platform for the Samsung **S3C2410** processor,
233: which has an ARM920T core.
235: More information on the S3C2410 can be found at [Samsung Electronics web page]
239: Support for the SMDK2410 was written by Hiroyuki Bessho, and contributed by
240: Genetec Corp.
242: * On-chip serial ports (_sscom_)
243: * On-chip USB host controller (_ohc_)
244: * On-chip timers (used as system clock)
245: * On-chip SPI (_ssspi_, used for other on-board devices)
246: * 240x320 TFT LCD (_lcd_)
247: * keyboard. (_sskbd_)
249: ### Samsung **SMDK2800**
251: The SMDK2800 is the reference platform for the **Samsung S3C2800** processor,
252: which has an ARM920T core.
254: S3C2800 has built-in PCI controller, and SMDK2800 has three PCI slots.
256: Support for the SMDK2800 was written by Hiroyuki Bessho, and contributed by
257: Fujitsu Component Ltd., and Genetec Corp.
259: * On-chip serial ports (_sscom_)
260: * On-chip Host-PCI bridge (_sspci_)
261: * On-chip timers (used as system clock)
262: * Other devices inserted into the PCI slots
264: ### Team ASA, Inc. **Npwr**
266: The Npwr is an IOP310-based design targeted at the network-attached storage
267: space. The Npwr comes in several configurations (single or dual Gigabit
268: Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board
269: or as a small server appliance. More information on the Npwr can be found at
270: the [Team ASA web page](http://www.teamasa.com/).
272: Support for the Npwr was written by Jason Thorpe and Allen Briggs, and
273: contributed by Wasabi Systems, Inc.
275: * On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_)
276: * On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_)
277: * On-board timer in the CPLD (used as system clock)
278: * On-board NS16550-compatible serial port (_com_)
280: ### Technologic Systems **TS-7200**
282: The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer
283: intended as a general purpose core for real embedded applications. The TS-7200
284: uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa)
285: bus and can either boot to CompactFlash or onboard flash. The board also has
286: general purpose digital IO and optional multichannel analog-to-digital
287: converters. More information on the TS-7200 can be found at [Technologic
290: Support for the TS-7200 was written by Jesse Off
292: * On-CPU RS232 UARTs (2) (_epcom_)
293: * On-CPU 10/100 Ethernet MAC (_epe_)
294: * CompactFlash socket (_wdc_)
295: * USB 1.1 ports (2) (_ohci_)
296: * Watchdog timer on CPLD (_tspld_)
297: * TMP124 high precision temperature sensor via sysctl
298: * 64Hz system clock from on-CPU timers (_epclk_)
299: * HD44780 2x24 text mode LCD (_tslcd_)
300: * 4x4 16 button matrix keypad (_wskbd_)
301: * TS-5620 battery backed RTC daughter-card (_tsrtc_)
302: * 1,2,4 port serial TS-SER daughter cards (_com_)
303: * Up to 4 10Mb TS-ETH10 daughter cards (_tscs_)
304: * Other devices inserted into the PC/104 (_isa_) expansion slot
308: * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)
309: * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005.
312: [[!tag tier1port]]
CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb