Annotation of wikisrc/ports/evbarm.mdwn, revision 1.1

1.1     ! mspo        1: [[!template id=port
        !             2: port="evbarm"
        !             3: cur_rel="5.1.2"
        !             4: future_rel="6.0"
        !             5: changes_cur="5.0"
        !             6: changes_future="6.0"
        !             7: thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
        !             8: about="""
        !             9: NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
        !            10: boards based on CPUs implementing the ARM architecture. NetBSD/evbarm also
        !            11: supports some specific embedded system products based on prototype board
        !            12: designs.
        !            13: 
        !            14: Jason Thorpe is the maintainer of NetBSD/evbarm.
        !            15: """
        !            16: supported_hardware="""
        !            17:   * Technologic Systems **TS-7200**
        !            18: 
        !            19: The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer
        !            20: intended as a general purpose core for real embedded applications. The TS-7200
        !            21: uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa)
        !            22: bus and can either boot to CompactFlash or onboard flash. The board also has
        !            23: general purpose digital IO and optional multichannel analog-to-digital
        !            24: converters. More information on the TS-7200 can be found at [Technologic
        !            25: Systems](http://www.embeddedarm.com/epc/ts7200-spec-h.html).
        !            26: 
        !            27: Support for the TS-7200 was written by Jesse Off
        !            28: 
        !            29:     * On-CPU RS232 UARTs (2) (_epcom_)
        !            30:     * On-CPU 10/100 Ethernet MAC (_epe_)
        !            31:     * CompactFlash socket (_wdc_)
        !            32:     * USB 1.1 ports (2) (_ohci_)
        !            33:     * Watchdog timer on CPLD (_tspld_)
        !            34:     * TMP124 high precision temperature sensor via sysctl
        !            35:     * 64Hz system clock from on-CPU timers (_epclk_)
        !            36:     * HD44780 2x24 text mode LCD (_tslcd_)
        !            37:     * 4x4 16 button matrix keypad (_wskbd_)
        !            38:     * TS-5620 battery backed RTC daughter-card (_tsrtc_)
        !            39:     * 1,2,4 port serial TS-SER daughter cards (_com_)
        !            40:     * Up to 4 10Mb TS-ETH10 daughter cards (_tscs_)
        !            41:     * Other devices inserted into the PC/104 (_isa_) expansion slot
        !            42: 
        !            43:   * ARM, Ltd. **Integrator**
        !            44: 
        !            45: The Integrator/AP is an ATX form-factor board that is used for development of
        !            46: ARM processor-based designs. It supports up to four processors on plug-in core
        !            47: modules, and provides clocks, a bus interface, and interrupt support. The
        !            48: Integrator/AP also supports logic modules which provide additional
        !            49: peripherals, and can accommodate up to three PCI expansion cards. The
        !            50: Integrator/AP can also be inserted into a CompactPCI backplane.
        !            51: 
        !            52: Support for the Integrator was written by Richard Earnshaw, and contributed by
        !            53: ARM, Ltd.
        !            54: 
        !            55:     * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
        !            56:     * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
        !            57:     * Other devices inserted into the PCI expansion slots
        !            58: 
        !            59:   * Intel **IQ31244**
        !            60: 
        !            61: The IQ31244 is a development platform for the Intel **IOP321** I/O Processor
        !            62: chipset and the Intel **i31244** SATA controller.
        !            63: 
        !            64: Initial support for the IQ31244 was written by Jason Thorpe, and contributed
        !            65: by Wasabi Systems, Inc.
        !            66: 
        !            67:     * Quad on-board Intel i31244 SATA controllers on the PCI-X bus (_artsata_)
        !            68:     * On-board Intel i82546EB Gigabit Ethernet on the PCI-X bus (_wm_)
        !            69:     * On-board NS16550-compatible serial port (_com_)
        !            70:     * On-chip timers (TMR0 used as system clock)
        !            71:     * On-chip Application Accelerator Unit (_iopaau_)
        !            72:     * On-chip watchdog timer (_iopwdog_)
        !            73:     * On-board compact flash reader (_wdc_)
        !            74:     * Other devices inserted into the PCI-X expansion slot
        !            75: 
        !            76:   * Intel **IQ80310**
        !            77: 
        !            78: The IQ80310 is the reference platform for the Intel **IOP310** I/O Processor
        !            79: chipset, which is comprised of the i80200 XScale processor and the i80312 I/O
        !            80: Companion chip.
        !            81: 
        !            82: Support for the IQ80310 was written by Jason Thorpe and Allen Briggs, and
        !            83: contributed by Wasabi Systems, Inc.
        !            84: 
        !            85:     * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
        !            86:     * On-board timer in the CPLD (used as system clock)
        !            87:     * On-board NS16550-compatible serial ports (_com_)
        !            88:     * Other devices inserted into the PCI expansion slots
        !            89: 
        !            90:   * Intel **IQ80321**
        !            91: 
        !            92: The IQ80321 is the reference platform for the Intel **IOP321** I/O Processor
        !            93: (i80321 XScale processor).
        !            94: 
        !            95: Support for the IQ80321 was written by Jason Thorpe, and contributed by Wasabi
        !            96: Systems, Inc.
        !            97: 
        !            98:     * On-board Intel i82544EI Gigabit Ethernet on the PCI-X bus (_wm_)
        !            99:     * On-board NS16550-compatible serial port (_com_)
        !           100:     * On-chip timers (TMR0 used as system clock)
        !           101:     * On-chip Application Accelerator Unit (_iopaau_)
        !           102:     * On-chip watchdog timer (_iopwdog_)
        !           103:     * Other devices inserted into the PCI-X expansion slots
        !           104: 
        !           105:   * Team ASA, Inc. **Npwr**
        !           106: 
        !           107: The Npwr is an IOP310-based design targeted at the network-attached storage
        !           108: space. The Npwr comes in several configurations (single or dual Gigabit
        !           109: Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board
        !           110: or as a small server appliance. More information on the Npwr can be found at
        !           111: the [Team ASA web page](http://www.teamasa.com/).
        !           112: 
        !           113: Support for the Npwr was written by Jason Thorpe and Allen Briggs, and
        !           114: contributed by Wasabi Systems, Inc.
        !           115: 
        !           116:     * On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_)
        !           117:     * On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_)
        !           118:     * On-board timer in the CPLD (used as system clock)
        !           119:     * On-board NS16550-compatible serial port (_com_)
        !           120: 
        !           121:   * Intel **IXM1200**
        !           122: 
        !           123: The IXM1200 is the reference platform for the Intel **IXP1200** Network
        !           124: Processor.
        !           125: 
        !           126: Support for the IXM1200 was written by Ichiro FUKUHARA and Naoto Shimazaki.
        !           127: 
        !           128:     * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
        !           129:     * On-board Intel i21555 Non-Transparent PCI-PCI Bridge (_nppb_)
        !           130:     * On-chip timers (ixpclk0 used as system clock)
        !           131:     * On-chip serial port (_ixpcom_)
        !           132: 
        !           133:   * Samsung **SMDK2410**
        !           134: 
        !           135: The SMDK2410 is the reference platform for the Samsung **S3C2410** processor,
        !           136: which has an ARM920T core.
        !           137: 
        !           138: More information on the S3C2410 can be found at [Samsung Electronics web page]
        !           139: (http://www.samsung.com/Products/Semiconductor/MobileSoC/ApplicationProcessor/
        !           140: ARM9Series/S3C2410/S3C2410.htm).
        !           141: 
        !           142: Support for the SMDK2410 was written by Hiroyuki Bessho, and contributed by
        !           143: Genetec Corp.
        !           144: 
        !           145:     * On-chip serial ports (_sscom_)
        !           146:     * On-chip USB host controller (_ohc_)
        !           147:     * On-chip timers (used as system clock)
        !           148:     * On-chip SPI (_ssspi_, used for other on-board devices)
        !           149:     * 240x320 TFT LCD (_lcd_)
        !           150:     * keyboard. (_sskbd_)
        !           151: 
        !           152:   * Samsung **SMDK2800**
        !           153: 
        !           154: The SMDK2800 is the reference platform for the **Samsung S3C2800** processor,
        !           155: which has an ARM920T core.
        !           156: 
        !           157: S3C2800 has built-in PCI controller, and SMDK2800 has three PCI slots.
        !           158: 
        !           159: Support for the SMDK2800 was written by Hiroyuki Bessho, and contributed by
        !           160: Fujitsu Component Ltd., and Genetec Corp.
        !           161: 
        !           162:     * On-chip serial ports (_sscom_)
        !           163:     * On-chip Host-PCI bridge (_sspci_)
        !           164:     * On-chip timers (used as system clock)
        !           165:     * Other devices inserted into the PCI slots 
        !           166: 
        !           167:   * ADI Engineering **BRH** ("Big Red Head") 
        !           168: 
        !           169: The BRH is an evaluation and development platform for the Intel **i80200**
        !           170: XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
        !           171: Chip"). The BRH is capable of both big- and little-endian operation, although
        !           172: NetBSD currently only supports little-endian operation. More information about
        !           173: the BRH can be found on [ADI Engineering's web
        !           174: page](http://www.adiengineering.com/productsBRH.html).
        !           175: 
        !           176: Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
        !           177: Systems, Inc.
        !           178: 
        !           179:     * On-board NS16550-compatible serial ports (_com_)
        !           180:     * On-board Intel i82559 Ethernet on the PCI bus (_fxp_)
        !           181:     * On-chip timer on the BECC (used as system clock)
        !           182:     * Other devices inserted into the PCI slot
        !           183: 
        !           184: The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are
        !           185: limited to 64M due to the layout of the PCI DMA windows. Users of these
        !           186: systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
        !           187: BECC.
        !           188: 
        !           189:   * NOVATEC **NTNP425B** ("ZAO425") 
        !           190: 
        !           191: NTNP425B is an evaluation and development platform for the Intel **IXP425**
        !           192: XScale Core NetworkProcessor. NTNP425B is based on the reference board of
        !           193: Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation.
        !           194: Since the library for micro-engine(NPE) offered from Intel Corp. is big-
        !           195: endian. More information about the **NTNP425B** can be found on [product
        !           196: catalogue of **NTNP425B**(2.5MB,PDF
        !           197: file)](http://www.novatec.co.jp/NTNP425BBrochureE.pdf).
        !           198: 
        !           199: Support for the NTNP425B was written by Ichiro FUKUHARA.
        !           200: 
        !           201:     * On-chip timers (_ixpclk0_ used as system clock)
        !           202:     * On-chip 2 serial port (_ixpcom0_ and _ixpcom1_)
        !           203:     * Other devices inserted into the PCI/mPCI slot
        !           204:     * On-chip watchdog timer (_ixpwdog_)
        !           205: 
        !           206:   * Intel **DBPXA250** ("Lubbock") 
        !           207: 
        !           208: DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the
        !           209: Intel **PXA250** XScale Core application processor. More information about the
        !           210: **DBPXA250** can be found at [Intel web
        !           211: site](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).
        !           212: 
        !           213: Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed
        !           214: by Genetec Corp.
        !           215: 
        !           216:     * On-chip timers (_saost_ used as system clock)
        !           217:     * On-chip 2 serial port (_com_)
        !           218:     * On-board SMC91C96 ethernet (_sm_)
        !           219:     * On-board SA-1111 StrongArm companion chip (_sacc_)
        !           220:     * PS/2 keyboard (_pckbd_)
        !           221:     * 640x480 LCD (_lcd_)
        !           222:     * PCMCIA and CF card slots
        !           223: 
        !           224:   * Arcom **Viper**
        !           225: 
        !           226: The Arcom Viper is a single board computer based on the PXA255 XScale
        !           227: processor.
        !           228: 
        !           229: Support for the Arcom Viper was written by Antti Kantee.
        !           230: 
        !           231:     * On-chip timers (_saost_ used as system clock)
        !           232:     * On-chip serial ports (_com_)
        !           233:     * On-board SMC91C111 ethernet (_sm_) 
        !           234: 
        !           235:   * Atmark Techno **Armadillo-9**
        !           236: 
        !           237: The Armadillo-9 is a single board computer based on the EP9315 processor.
        !           238: 
        !           239: Support for the Armadillo-9 was written by Katsuomi Hamajima.
        !           240: 
        !           241:     * On-CPU RS232 UARTs (2) (_epcom_)
        !           242:     * On-CPU 10/100 Ethernet MAC (_epe_)
        !           243:     * system clock from on-CPU timers (_epclk_)
        !           244:     * CompactFlash socket (_eppcic_)
        !           245:     * USB 1.1 ports (_ohci_)
        !           246: 
        !           247:   * Gumstix, Inc. **gumstix**
        !           248: 
        !           249: The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard
        !           250: based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now.
        !           251: 
        !           252: Support for the gumstix was written by KIYOHARA Takashi.
        !           253: 
        !           254:     * basix
        !           255:     * cfstix
        !           256:     * etherstix
        !           257:     * netCF
        !           258:     * netDUO
        !           259:     * netDUO-mmc
        !           260:     * netMMC 
        !           261: 
        !           262: When booting, it is necessary to set these with u-boot dynamically.
        !           263: 
        !           264: > go 0xa0200000 busheader=basix
        !           265: 
        !           266:     * audiostix
        !           267:     * console-st (waysmall - STUART)
        !           268:     * console-hw (waysmall)
        !           269:     * GPSstix (GPS not test)
        !           270:     * tweener
        !           271: """
        !           272: aditional="""
        !           273:   * The [NetBSD Diskless HOWTO](/docs/network/netboot/)
        !           274:   * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. 
        !           275: """
        !           276: ]]
        !           277: [[!tag tier1port]]
        !           278: 

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb