Diff for /wikisrc/ports/evbarm.mdwn between versions 1.77 and 1.83

version 1.77, 2019/06/27 16:52:01 version 1.83, 2020/01/08 06:45:15
Line 6  port_var2="earmeb" Line 6  port_var2="earmeb"
 port_var3="earmv6hf"  port_var3="earmv6hf"
 port_var4="earmv7hf"  port_var4="earmv7hf"
 port_var5="earmv7hfeb"  port_var5="earmv7hfeb"
   port_var6="aarch64"
 port_var_install_notes="evbarm-earm"  port_var_install_notes="evbarm-earm"
 cur_rel="8.1"  cur_rel="8.1"
 future_rel="9.0"  future_rel="9.0"
Line 49  set and the aarch64 architecture, built  Line 50  set and the aarch64 architecture, built 
 (Note also that armv8 is the first architecture to support aarch64, so  (Note also that armv8 is the first architecture to support aarch64, so
 this will not be an issue until at least armv9.)  this will not be an issue until at least armv9.)
   
 ### anita and qemu  ### QEMU
   
   See the [[NetBSD/evbarm under QEMU|qemu_arm]] page for instructions on how to get started with QEMU.
   
   ### anita
   
 anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.  anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.
   
Line 57  anita can be used to test builds.  (In a Line 62  anita can be used to test builds.  (In a
  - evbarm-aarch64 uses "qemu-system-aarch64 -M virt"   - evbarm-aarch64 uses "qemu-system-aarch64 -M virt"
  - Information on how to test emulated versions of other specific hardware is welcome.   - Information on how to test emulated versions of other specific hardware is welcome.
   
 ### Board specific information  ### invisible.ca builds
   
   NetBSD developer Jared McNeill provides [builds of NetBSD-current for a vast variety of hardware.](https://www.invisible.ca/arm/)   In addition to the standard build, these images have board-specific uboot contents.  See also /usr/pkgsrc/sysutils/u-boot*.
   
   ### Board specific information (often including installation information)
  - [[Allwinner sunxi family SoCs|Allwinner]]   - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]   - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]
  - [[NVIDIA Tegra|Tegra]]   - [[NVIDIA Tegra|Tegra]]
  - [[ODROID C1 and C1+|ODROID-C1]]   - [[ODROID C1 and C1+|ODROID-C1]]
  - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]   - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]
    - [[RockChip SoCs|RockChip]]
 """  
   
 ### SSH configuration for installtion  ### SSH configuration for installtion
   
Line 78  Create a creds.txt file and use: Line 86  Create a creds.txt file and use:
   
 <!--TODO: Additional configuration options are available on creds_msdos.8-->  <!--TODO: Additional configuration options are available on creds_msdos.8-->
   
   """
 supported_hardware="""  supported_hardware="""
   
 **NOTE**: This list is incomplete. For a full list of boards, please see the [GENERIC DTS files](http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/sys/arch/evbarm/conf/GENERIC).  **NOTE**: This list is incomplete. For a full list of boards, please see the [GENERIC DTS files](http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/sys/arch/evbarm/conf/GENERIC).
Line 280  Support for NVIDIA [[Tegra]] K1 SoCs is  Line 289  Support for NVIDIA [[Tegra]] K1 SoCs is 
 ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3**  ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3**
 The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.  The Raspberry Pi, Pi 2, and Pi 3 are supported.  The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.  The Raspberry Pi, Pi 2, and Pi 3 are supported.
   
   See the [[Raspberry Pi 1, 2 and 3|Raspberry Pi]] page for much more information.
   
 ### Samsung **SMDK2410**  ### Samsung **SMDK2410**
   
 The SMDK2410 is the reference platform for the Samsung **S3C2410** processor,  The SMDK2410 is the reference platform for the Samsung **S3C2410** processor,

Removed from v.1.77  
changed lines
  Added in v.1.83


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb