[BACK]Return to evbarm.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports

Diff for /wikisrc/ports/evbarm.mdwn between versions 1.72 and 1.78

version 1.72, 2019/06/12 08:29:41 version 1.78, 2019/06/27 17:28:31
Line 18  boards based on CPUs implementing the AR Line 18  boards based on CPUs implementing the AR
 supports some specific embedded system products based on prototype board  supports some specific embedded system products based on prototype board
 designs.  designs.
   
 Matt Thomas is the maintainer of NetBSD/evbarm.  
   
 ### CPU types  ### CPU types
   
 The evbarm port can be built with a variety of CPU options, corresponding to the  The evbarm port can be built with a variety of CPU options, corresponding to the
Line 51  set and the aarch64 architecture, built  Line 49  set and the aarch64 architecture, built 
 (Note also that armv8 is the first architecture to support aarch64, so  (Note also that armv8 is the first architecture to support aarch64, so
 this will not be an issue until at least armv9.)  this will not be an issue until at least armv9.)
   
 ### Kernels and userland  
   
 The evbarm userland can be used on any system that can run code of the  
 CPU type used for the build.  Typically, a particular board requires a  
 kernel for that board.  
   
 ### anita and qemu  ### anita and qemu
   
 anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.  anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.
Line 65  anita can be used to test builds.  (In a Line 57  anita can be used to test builds.  (In a
  - evbarm-aarch64 uses "qemu-system-aarch64 -M virt"   - evbarm-aarch64 uses "qemu-system-aarch64 -M virt"
  - Information on how to test emulated versions of other specific hardware is welcome.   - Information on how to test emulated versions of other specific hardware is welcome.
   
   ### invisible.ca builds
   
   NetBSD developer Jared McNeill provides [builds of NetBSD-current for a vast variety of hardware.](https://www.invisible.ca/arm/)   In addition to the standard build, these images have board-specific uboot contents.  See also /usr/pkgsrc/sysutils/u-boot*.
   
 ### Board specific information  ### Board specific information
  - [[Allwinner sunxi family SoCs|Allwinner]]   - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]   - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]
Line 74  anita can be used to test builds.  (In a Line 70  anita can be used to test builds.  (In a
   
 """  """
   
   ### SSH configuration for installtion
   
   The default configuration will connect to the local network via DHCP and
   run an SSH server. In order to use the SSH server, we must configure
   users. This can be done by writing to the SD card's MS-DOS partition.
   
   Create a creds.txt file and use:
   
              useradd user password
   
   <!--TODO: Additional configuration options are available on creds_msdos.8-->
   
 supported_hardware="""  supported_hardware="""
   
 **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.  **NOTE**: This list is incomplete. For a full list of boards, please see the [GENERIC DTS files](http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/sys/arch/evbarm/conf/GENERIC).
   
 [[!toc startlevel=3]]  [[!toc startlevel=3]]
   
Removed from v.1.72  
changed lines
  Added in v.1.78

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb