--- wikisrc/ports/evbarm.mdwn	2018/11/24 16:22:20	1.65
+++ wikisrc/ports/evbarm.mdwn	2019/06/02 13:32:38	1.71
@@ -7,11 +7,11 @@ port_var3="earmv6hf"
 port_var4="earmv7hf"
 port_var5="earmv7hfeb"
 port_var_install_notes="evbarm-earm"
-cur_rel="8.0"
+cur_rel="8.1"
 future_rel="9.0"
-changes_cur="8.0"
+changes_cur="8.1"
 changes_future="9.0"
-thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
+thumbnail="//www.netbsd.org/images/ports/evbarm/adi_brh.gif"
 about="""
 NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
 boards based on CPUs implementing the ARM architecture. NetBSD/evbarm also
@@ -27,7 +27,7 @@ The evbarm port can be built with a vari
 There are
 four main variables: the word size, the instruction set, the
 endianness, and whether there is hardware floating point.  By default
-the CPU type is "earm", and this implies aarch32 (32-bit), \todo cpu
+the CPU type is "earm", and this implies aarch32 (32-bit), earmv5 cpu
 architecture, little endian (el when explicitly stated), and soft
 (Emulated) floating point.  Another example, suitable for Raspberry PI
 2, is earmv7hf, which is aarch32, the v7 instruction set, little
@@ -75,20 +75,21 @@ targets, all having "earm" are EABI.
 ### Relationship of MACHINE_ARCH to official ARM terminology
 
 Note that these are all little endian, and have big endian variants
-with a "eb" suffix.   
+with a "eb" suffix.  Unless otherwise noted, all use the A32 or
+aarch32 instruction set.
 
 [[!table data=<<EOT
 MACHINE_ARCH |bits | ARM architecture version            |ABI
-arm          |32   |?                                    |oabi
-earm         |32   |armv4 (effectively an alias)         |eabi
+arm          |32   |\todo ?                              |oabi
+earm         |32   |alias for earmv5 (\todo why?)        |eabi
 earmv4       |32   |armv4 (no thumb, so ok on strongarm) |eabi
 earmv5       |32   |armv5t                               |eabi
 earmv6       |32   |armv6                                |eabi
 earmv7       |32   |armv7                                |eabi
-aarch64      |64   |armv8                                |\todo ? eabi
+aarch64      |64   |armv8 in aarch64 mode                |\todo ? eabi
 EOT]]
 
-\todo Explain why, if we have armv4, and this is confusing, we still have earm as a MACHINE_ARCH.
+\todo Explain why, if we have armv5, we still have earm as a MACHINE_ARCH.
 
 \todo Explain why aarch64 is a MACHINE_ARCH, when it seems like it
 should be something like armv8hf_64.
@@ -112,7 +113,7 @@ anita can be used to test builds.  (In a
 
 ### Board specific information
  - [[Allwinner sunxi family SoCs|Allwinner]]
- - [[BeagleBone and BeagleBone Black|BeagleBone]]
+ - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]]
  - [[NVIDIA Tegra|Tegra]]
  - [[ODROID C1 and C1+|ODROID-C1]]
  - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]