Diff for /wikisrc/ports/evbarm.mdwn between versions 1.39 and 1.58

version 1.39, 2017/10/08 14:42:05 version 1.58, 2018/11/22 00:56:36
Line 1 Line 1
 [[!template id=port  [[!template id=port
 port="evbarm"  port="evbarm"
 port_alt="arm"  port_alt="arm"
 port_var1="arm"  port_var1="earm"
 port_var2="armeb"  port_var2="earmeb"
 port_var3="earm"  port_var3="earmv6hf"
 port_var4="earmeb"  port_var4="earmv7hf"
 port_var5="earmv6hf"  port_var5="earmv7hfeb"
 port_var6="earmv7hf"  port_var_install_notes="evbarm-earm"
 port_var7="earmv7hfeb"  cur_rel="8.0"
 port_var_install_notes="evbarm-arm"  future_rel="9.0"
 cur_rel="7.1"  changes_cur="8.0"
 future_rel="8.0"  changes_future="9.0"
 thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"  thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
 about="""  about="""
 NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping  NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
Line 22  designs. Line 20  designs.
 Matt Thomas is the maintainer of NetBSD/evbarm.  Matt Thomas is the maintainer of NetBSD/evbarm.
   ### CPU types
   The evbarm port can be built with a variety of CPU options, corresponding to the
   [large array of ARM CPU architectures](https://en.wikipedia.org/wiki/ARM_architecture#Cores).
   There are
   four main variables: the word size, the instruction set, the
   endianness, and whether there is hardware floating point.  By default
   the CPU type is "earm", and this implies aarch32 (32-bit), \todo cpu
   architecture, little endian (el when explicitly stated), and soft
   (Emulated) floating point.  Another example, suitable for Raspberry PI
   2, is earmv7hf, which is aarch32, the v7 instruction set, little
   endian, and hardware floating point.
   Typically, various boards are best compiled with a CPU type that
   matches the board's CPU and floating point support, but generally a
   lower CPU instruction set version is workable on a newer board.  See
   build.sh and look for aliases for the evbarm port.
   Through NetBSD 8, the evbarm port has supported exclusively the
   aarch32 (32-bit CPU) sub-family of the ARM architecture.  Some
   processors, such as many supporting the armv8 CPU architecture, also
   support a 64-bit instruction set, referred to as aarch64.  This is
   sometimes referred to as a distinct port, [[NetBSD/aarch64|aarch64]],
   with code in src/sys/arch/aarch64, but it is built as the evbarm port
   with aarch64 cpu type, and available as the alias evbarm64.
   Note that MACHINE_ARCH=aarch64 currently refers to the A64 instruction
   set and the aarch64 architecture, built for the armv8 architecture.
   (Note also that armv8 is the first architecture to support aarch64, so
   this will not be an issue until at least armv9.)
   #### ABI types
   There are two basic ABIs on ARM.  One, called oabi, assumed a
   particular kind of hardware floating point (FPA).  This results in
   faulting any floating-point instructions for kernel emulation on a
   vast number of CPus, which is very slow.  A newer one, called eabi,
   has two variants.  Both have stricter alignment rules, tending to 8
   byte rather than 4 bytes for 8-byte types (but actually read the specs
   if you care).  The one without "hf" emulates floating point without
   causing traps/emulation, and "hf" uses VFP instructions, which are
   present on modern CPUs. See the
   [TS-7200](https://wiki.embeddedarm.com/wiki/EABI_vs_OABI) and
   [Debian](https://wiki.debian.org/ArmEabiPort) documentation.
   Now, EABI is normal, and OABI is crufty.  The only real reason NetBSD
   retains OABI support is binary compatibility with older releases.  The
   "arm" and "armeb" MACHINE_ARCH targets are OABI; the rest of the
   targets, all having "earm" are EABI.
   \todo CHECK THIS: The "aarch64" MACHINE_ARCH target is an EABI variant.
   ### Relationship of MACHINE_ARCH to official ARM terminology
   Note that these are all little endian, and have big endian variants
   with a "eb" sufix.   
   [[!table data="""
   MACHINE_ARCH | 32/64 | ARM architecture version | ABI
   arm | 32 | ? | oabi
   earm | 32 | armv4 (effectively an alias) | eabi
   earmv4 | 32 | armv4 (no thumb, so ok on strongarm) | eabi
   earmv5 | 32 | armv5t | eabi
   earmv6 | 32 | armv6 | eabi
   earmv7 | 32 | armv7 | eabi
   aarch64 | 64 | armv8 | \todo ? eabi
   \todo Explain why, if we have armv4, and this is confusing, we still have earm as a MACHINE_ARCH.
   \todo Explain if MACHINE_ARCH values correspond to a particular
   argument to some CPU selection command in gcc (and/or clang).
   ### Kernels and userland
   The evbarm userland can be used on any system that can run code of the
   CPU type used for the build.  Typically, a particular board requires a
   kernel for that board.
   ### anita and qemu
   anita can be used to test builds.  (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.)   The release subdirectory should follow the naming convention on the autobuild cluster, used below.
    - evbarm-earmv7hf uses "qemu-system-arm -M vexpress-a15"
    - evbarm-aarch64 uses "qemu-system-aarch64 -M virt"
    - Information on how to test emulated versions of other specific hardware is welcome.
 ### Board specific information  ### Board specific information
  - [[Allwinner sunxi family SoCs|Allwinner]]   - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone and BeagleBone Black|BeagleBone]]   - [[BeagleBone and BeagleBone Black|BeagleBone]]
  - [[NVIDIA Jetson TK1|Tegra]]   - [[NVIDIA Tegra|Tegra]]
  - [[ODROID C1 and C1+|ODROID-C1]]   - [[ODROID C1 and C1+|ODROID-C1]]
  - [[Raspberry Pi and Pi 2|Raspberry Pi]]   - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]
 """  """
Line 230  Support for the NTNP425B was written by  Line 315  Support for the NTNP425B was written by 
 Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and  Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and
 8.0_BETA. The Jetson TK1 board is currently supported.  8.0_BETA. The Jetson TK1 board is currently supported.
 ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**  ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3**
 The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported.  The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.  The Raspberry Pi, Pi 2, and Pi 3 are supported.
 ### Rockchip PX2/RK3066/RK3188/RK3188+  
 Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel.  
 ### Samsung **SMDK2410**  ### Samsung **SMDK2410**

Removed from v.1.39  
changed lines
  Added in v.1.58

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb