version 1.4, 2012/11/03 19:20:33
|
version 1.57, 2018/11/21 13:27:04
|
Line 1
|
Line 1
|
[[!template id=port |
[[!template id=port |
port="evbarm" |
port="evbarm" |
cur_rel="6.0" |
port_alt="arm" |
future_rel="7.0" |
port_var1="earm" |
changes_cur="6.0" |
port_var2="earmeb" |
changes_future="7.0" |
port_var3="earmv6hf" |
|
port_var4="earmv7hf" |
|
port_var5="earmv7hfeb" |
|
port_var_install_notes="evbarm-earm" |
|
cur_rel="8.0" |
|
future_rel="9.0" |
|
changes_cur="8.0" |
|
changes_future="9.0" |
thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif" |
thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif" |
about=""" |
about=""" |
NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping |
NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping |
Line 11 boards based on CPUs implementing the AR
|
Line 18 boards based on CPUs implementing the AR
|
supports some specific embedded system products based on prototype board |
supports some specific embedded system products based on prototype board |
designs. |
designs. |
|
|
Jason Thorpe is the maintainer of NetBSD/evbarm. |
Matt Thomas is the maintainer of NetBSD/evbarm. |
|
|
|
### CPU types |
|
|
|
The evbarm port can be built with a variety of CPU options, corresponding to the |
|
[large array of ARM CPU architectures](https://en.wikipedia.org/wiki/ARM_architecture#Cores). |
|
There are |
|
four main variables: the word size, the instruction set, the |
|
endianness, and whether there is hardware floating point. By default |
|
the CPU type is "earm", and this implies aarch32 (32-bit), \todo cpu |
|
architecture, little endian (el when explicitly stated), and soft |
|
(emulated) floating point. Another example, suitable for Raspberry PI |
|
2, is earmv7hf, which is aarch32, the v7 instruction set, little |
|
endian, and hardware floating point. |
|
|
|
Typically, various boards are best compiled with a CPU type that |
|
matches the board's CPU and floating point support, but generally a |
|
lower CPU instruction set version is workable on a newer board. See |
|
build.sh and look for aliases for the evbarm port. |
|
|
|
Through NetBSD 8, the evbarm port has supported exclusively the |
|
aarch32 (32-bit CPU) sub-family of the ARM architecture. Some |
|
processors, such as many supporting the armv8 CPU architecture, also |
|
support a 64-bit instruction set, referred to as aarch64. This is |
|
sometimes referred to as a distinct port, [[NetBSD/aarch64|aarch64]], |
|
with code in src/sys/arch/aarch64, but it is built as the evbarm port |
|
with aarch64 cpu type, and available as the alias evbarm64. |
|
|
|
### Kernels and userland |
|
|
|
The evbarm userland can be used on any system that can run code of the |
|
CPU type used for the build. Typically, a particular board requires a |
|
kernel for that board. |
|
|
|
### anita and qemu |
|
|
|
anita can be used to test builds. (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.) The release subdirectory should follow the naming convention on the autobuild cluster, used below. |
|
|
|
- evbarm-earmv7hf uses "qemu-system-arm -M vexpress-a15" |
|
- evbarm-aarch64 uses "qemu-system-aarch64 -M virt" |
|
- Information on how to test emulated versions of other specific hardware is welcome. |
|
|
|
### Board specific information |
|
- [[Allwinner sunxi family SoCs|Allwinner]] |
|
- [[BeagleBone and BeagleBone Black|BeagleBone]] |
|
- [[NVIDIA Tegra|Tegra]] |
|
- [[ODROID C1 and C1+|ODROID-C1]] |
|
- [[Raspberry Pi 1, 2 and 3|Raspberry Pi]] |
|
|
""" |
""" |
|
|
supported_hardware=""" |
supported_hardware=""" |
### Technologic Systems **TS-7200** |
|
|
|
The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer |
**NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS. |
intended as a general purpose core for real embedded applications. The TS-7200 |
|
uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa) |
|
bus and can either boot to CompactFlash or onboard flash. The board also has |
|
general purpose digital IO and optional multichannel analog-to-digital |
|
converters. More information on the TS-7200 can be found at [Technologic |
|
Systems](http://www.embeddedarm.com/epc/ts7200-spec-h.html). |
|
|
|
Support for the TS-7200 was written by Jesse Off |
[[!toc startlevel=3]] |
|
|
* On-CPU RS232 UARTs (2) (_epcom_) |
### ADI Engineering **BRH** ("Big Red Head") |
* On-CPU 10/100 Ethernet MAC (_epe_) |
|
* CompactFlash socket (_wdc_) |
The BRH is an evaluation and development platform for the Intel **i80200** |
* USB 1.1 ports (2) (_ohci_) |
XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion |
* Watchdog timer on CPLD (_tspld_) |
Chip"). The BRH is capable of both big- and little-endian operation, although |
* TMP124 high precision temperature sensor via sysctl |
NetBSD currently only supports little-endian operation. |
* 64Hz system clock from on-CPU timers (_epclk_) |
|
* HD44780 2x24 text mode LCD (_tslcd_) |
Support for the BRH was written by Jason Thorpe, and contributed by Wasabi |
* 4x4 16 button matrix keypad (_wskbd_) |
Systems, Inc. |
* TS-5620 battery backed RTC daughter-card (_tsrtc_) |
|
* 1,2,4 port serial TS-SER daughter cards (_com_) |
* On-board NS16550-compatible serial ports (_com_) |
* Up to 4 10Mb TS-ETH10 daughter cards (_tscs_) |
* On-board Intel i82559 Ethernet on the PCI bus (_fxp_) |
* Other devices inserted into the PC/104 (_isa_) expansion slot |
* On-chip timer on the BECC (used as system clock) |
|
* Other devices inserted into the PCI slot |
|
|
|
The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are |
|
limited to 64M due to the layout of the PCI DMA windows. Users of these |
|
systems should obtain an FPGA upgrade from ADI to revision 8 or later of the |
|
BECC. |
|
|
|
### Allwinner Technology |
|
Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31. |
|
|
|
### Arcom **Viper** |
|
|
|
The Arcom Viper is a single board computer based on the PXA255 XScale |
|
processor. |
|
|
|
Support for the Arcom Viper was written by Antti Kantee. |
|
|
|
* On-chip timers (_saost_ used as system clock) |
|
* On-chip serial ports (_com_) |
|
* On-board SMC91C111 ethernet (_sm_) |
|
|
### ARM, Ltd. **Integrator** |
### ARM, Ltd. **Integrator** |
|
|
Line 54 ARM, Ltd.
|
Line 123 ARM, Ltd.
|
|
|
* PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_) |
* PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_) |
* PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_) |
* PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_) |
|
* PrimeCell PL181 MultiMedia Card Interface |
* Other devices inserted into the PCI expansion slots |
* Other devices inserted into the PCI expansion slots |
|
|
|
### Atmark Techno **Armadillo-9** |
|
|
|
The Armadillo-9 is a single board computer based on the EP9315 processor. |
|
|
|
Support for the Armadillo-9 was written by Katsuomi Hamajima. |
|
|
|
* On-CPU RS232 UARTs (2) (_epcom_) |
|
* On-CPU 10/100 Ethernet MAC (_epe_) |
|
* system clock from on-CPU timers (_epclk_) |
|
* CompactFlash socket (_eppcic_) |
|
* USB 1.1 ports (_ohci_) |
|
|
|
### BeagleBoard.org **BeagleBoard** and **BeagleBoard-xM** |
|
The [[BeagleBoard]] is a low-power open-source hardware single-board computer from BeagleBoard.org. |
|
|
|
### BeagleBoard.org **BeagleBone** and **BeagleBone Black** |
|
The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard.org. |
|
|
|
### Gumstix, Inc. **gumstix** |
|
|
|
The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard |
|
based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now. |
|
|
|
Support for the gumstix was written by KIYOHARA Takashi. |
|
|
|
* basix |
|
* cfstix |
|
* etherstix |
|
* netCF |
|
* netDUO |
|
* netDUO-mmc |
|
* netMMC |
|
|
|
When booting, it is necessary to set these with u-boot dynamically. |
|
|
|
<pre> > go 0xa0200000 busheader=basix</pre> |
|
|
|
* audiostix |
|
* console-st (waysmall - STUART) |
|
* console-hw (waysmall) |
|
* GPSstix (GPS not test) |
|
* tweener |
|
|
|
### Hardkernel ODROID-C1 and ODROID-C1+ |
|
|
|
The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd. |
|
|
|
### Intel **DBPXA250** ("Lubbock") |
|
|
|
DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the |
|
Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm). |
|
|
|
Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed |
|
by Genetec Corp. |
|
|
|
* On-chip timers (_saost_ used as system clock) |
|
* On-chip 2 serial port (_com_) |
|
* On-board SMC91C96 ethernet (_sm_) |
|
* On-board SA-1111 StrongArm companion chip (_sacc_) |
|
* PS/2 keyboard (_pckbd_) |
|
* 640x480 LCD (_lcd_) |
|
* PCMCIA and CF card slots |
|
|
### Intel **IQ31244** |
### Intel **IQ31244** |
|
|
The IQ31244 is a development platform for the Intel **IOP321** I/O Processor |
The IQ31244 is a development platform for the Intel **IOP321** I/O Processor |
Line 102 Systems, Inc.
|
Line 235 Systems, Inc.
|
* On-chip watchdog timer (_iopwdog_) |
* On-chip watchdog timer (_iopwdog_) |
* Other devices inserted into the PCI-X expansion slots |
* Other devices inserted into the PCI-X expansion slots |
|
|
### Team ASA, Inc. **Npwr** |
|
|
|
The Npwr is an IOP310-based design targeted at the network-attached storage |
|
space. The Npwr comes in several configurations (single or dual Gigabit |
|
Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board |
|
or as a small server appliance. More information on the Npwr can be found at |
|
the [Team ASA web page](http://www.teamasa.com/). |
|
|
|
Support for the Npwr was written by Jason Thorpe and Allen Briggs, and |
|
contributed by Wasabi Systems, Inc. |
|
|
|
* On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_) |
|
* On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_) |
|
* On-board timer in the CPLD (used as system clock) |
|
* On-board NS16550-compatible serial port (_com_) |
|
|
|
### Intel **IXM1200** |
### Intel **IXM1200** |
|
|
The IXM1200 is the reference platform for the Intel **IXP1200** Network |
The IXM1200 is the reference platform for the Intel **IXP1200** Network |
Line 130 Support for the IXM1200 was written by I
|
Line 247 Support for the IXM1200 was written by I
|
* On-chip timers (ixpclk0 used as system clock) |
* On-chip timers (ixpclk0 used as system clock) |
* On-chip serial port (_ixpcom_) |
* On-chip serial port (_ixpcom_) |
|
|
|
### NOVATEC **NTNP425B** ("ZAO425") |
|
|
|
NTNP425B is an evaluation and development platform for the Intel **IXP425** |
|
XScale Core NetworkProcessor. NTNP425B is based on the reference board of |
|
Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation. |
|
Since the library for micro-engine(NPE) offered from Intel Corp. is big- |
|
endian. More information about the **NTNP425B** can be found on [product |
|
catalogue of **NTNP425B**(2.5MB,PDF |
|
file)](http://www.novatec.co.jp/NTNP425BBrochureE.pdf). |
|
|
|
Support for the NTNP425B was written by Ichiro FUKUHARA. |
|
|
|
* On-chip timers (_ixpclk0_ used as system clock) |
|
* On-chip 2 serial port (_ixpcom0_ and _ixpcom1_) |
|
* Other devices inserted into the PCI/mPCI slot |
|
* On-chip watchdog timer (_ixpwdog_) |
|
|
|
### NVIDIA Tegra K1 |
|
Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and |
|
8.0_BETA. The Jetson TK1 board is currently supported. |
|
|
|
### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3** |
|
The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. The Raspberry Pi, Pi 2, and Pi 3 are supported. |
|
|
### Samsung **SMDK2410** |
### Samsung **SMDK2410** |
|
|
The SMDK2410 is the reference platform for the Samsung **S3C2410** processor, |
The SMDK2410 is the reference platform for the Samsung **S3C2410** processor, |
Line 162 Fujitsu Component Ltd., and Genetec Corp
|
Line 303 Fujitsu Component Ltd., and Genetec Corp
|
* On-chip serial ports (_sscom_) |
* On-chip serial ports (_sscom_) |
* On-chip Host-PCI bridge (_sspci_) |
* On-chip Host-PCI bridge (_sspci_) |
* On-chip timers (used as system clock) |
* On-chip timers (used as system clock) |
* Other devices inserted into the PCI slots |
* Other devices inserted into the PCI slots |
|
|
### ADI Engineering **BRH** ("Big Red Head") |
|
|
|
The BRH is an evaluation and development platform for the Intel **i80200** |
|
XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion |
|
Chip"). The BRH is capable of both big- and little-endian operation, although |
|
NetBSD currently only supports little-endian operation. More information about |
|
the BRH can be found on [ADI Engineering's web |
|
page](http://www.adiengineering.com/productsBRH.html). |
|
|
|
Support for the BRH was written by Jason Thorpe, and contributed by Wasabi |
|
Systems, Inc. |
|
|
|
* On-board NS16550-compatible serial ports (_com_) |
|
* On-board Intel i82559 Ethernet on the PCI bus (_fxp_) |
|
* On-chip timer on the BECC (used as system clock) |
|
* Other devices inserted into the PCI slot |
|
|
|
The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are |
|
limited to 64M due to the layout of the PCI DMA windows. Users of these |
|
systems should obtain an FPGA upgrade from ADI to revision 8 or later of the |
|
BECC. |
|
|
|
### NOVATEC **NTNP425B** ("ZAO425") |
|
|
|
NTNP425B is an evaluation and development platform for the Intel **IXP425** |
|
XScale Core NetworkProcessor. NTNP425B is based on the reference board of |
|
Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation. |
|
Since the library for micro-engine(NPE) offered from Intel Corp. is big- |
|
endian. More information about the **NTNP425B** can be found on [product |
|
catalogue of **NTNP425B**(2.5MB,PDF |
|
file)](http://www.novatec.co.jp/NTNP425BBrochureE.pdf). |
|
|
|
Support for the NTNP425B was written by Ichiro FUKUHARA. |
|
|
|
* On-chip timers (_ixpclk0_ used as system clock) |
|
* On-chip 2 serial port (_ixpcom0_ and _ixpcom1_) |
|
* Other devices inserted into the PCI/mPCI slot |
|
* On-chip watchdog timer (_ixpwdog_) |
|
|
|
### Intel **DBPXA250** ("Lubbock") |
|
|
|
DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the |
|
Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm). |
|
|
|
Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed |
|
by Genetec Corp. |
|
|
|
* On-chip timers (_saost_ used as system clock) |
|
* On-chip 2 serial port (_com_) |
|
* On-board SMC91C96 ethernet (_sm_) |
|
* On-board SA-1111 StrongArm companion chip (_sacc_) |
|
* PS/2 keyboard (_pckbd_) |
|
* 640x480 LCD (_lcd_) |
|
* PCMCIA and CF card slots |
|
|
|
### Arcom **Viper** |
|
|
|
The Arcom Viper is a single board computer based on the PXA255 XScale |
|
processor. |
|
|
|
Support for the Arcom Viper was written by Antti Kantee. |
|
|
|
* On-chip timers (_saost_ used as system clock) |
### Team ASA, Inc. **Npwr** |
* On-chip serial ports (_com_) |
|
* On-board SMC91C111 ethernet (_sm_) |
|
|
|
### Atmark Techno **Armadillo-9** |
|
|
|
The Armadillo-9 is a single board computer based on the EP9315 processor. |
|
|
|
Support for the Armadillo-9 was written by Katsuomi Hamajima. |
|
|
|
* On-CPU RS232 UARTs (2) (_epcom_) |
The Npwr is an IOP310-based design targeted at the network-attached storage |
* On-CPU 10/100 Ethernet MAC (_epe_) |
space. The Npwr comes in several configurations (single or dual Gigabit |
* system clock from on-CPU timers (_epclk_) |
Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board |
* CompactFlash socket (_eppcic_) |
or as a small server appliance. More information on the Npwr can be found at |
* USB 1.1 ports (_ohci_) |
the [Team ASA web page](http://www.teamasa.com/). |
|
|
### Gumstix, Inc. **gumstix** |
Support for the Npwr was written by Jason Thorpe and Allen Briggs, and |
|
contributed by Wasabi Systems, Inc. |
|
|
The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard |
* On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_) |
based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now. |
* On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_) |
|
* On-board timer in the CPLD (used as system clock) |
|
* On-board NS16550-compatible serial port (_com_) |
|
|
Support for the gumstix was written by KIYOHARA Takashi. |
### Technologic Systems **TS-7200** |
|
|
* basix |
The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer |
* cfstix |
intended as a general purpose core for real embedded applications. The TS-7200 |
* etherstix |
uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa) |
* netCF |
bus and can either boot to CompactFlash or onboard flash. The board also has |
* netDUO |
general purpose digital IO and optional multichannel analog-to-digital |
* netDUO-mmc |
converters. More information on the TS-7200 can be found at [Technologic |
* netMMC |
Systems](http://www.embeddedarm.com/epc/ts7200-spec-h.html). |
|
|
When booting, it is necessary to set these with u-boot dynamically. |
Support for the TS-7200 was written by Jesse Off |
|
|
<pre> > go 0xa0200000 busheader=basix</pre> |
* On-CPU RS232 UARTs (2) (_epcom_) |
|
* On-CPU 10/100 Ethernet MAC (_epe_) |
|
* CompactFlash socket (_wdc_) |
|
* USB 1.1 ports (2) (_ohci_) |
|
* Watchdog timer on CPLD (_tspld_) |
|
* TMP124 high precision temperature sensor via sysctl |
|
* 64Hz system clock from on-CPU timers (_epclk_) |
|
* HD44780 2x24 text mode LCD (_tslcd_) |
|
* 4x4 16 button matrix keypad (_wskbd_) |
|
* TS-5620 battery backed RTC daughter-card (_tsrtc_) |
|
* 1,2,4 port serial TS-SER daughter cards (_com_) |
|
* Up to 4 10Mb TS-ETH10 daughter cards (_tscs_) |
|
* Other devices inserted into the PC/104 (_isa_) expansion slot |
|
|
* audiostix |
|
* console-st (waysmall - STUART) |
|
* console-hw (waysmall) |
|
* GPSstix (GPS not test) |
|
* tweener |
|
""" |
""" |
aditional=""" |
additional=""" |
* The [NetBSD Diskless HOWTO](/docs/network/netboot/) |
* The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/) |
* [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. |
* [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. |
""" |
""" |
]] |
]] |
[[!tag tier1port]] |
[[!tag tier1port]] |
|
|