[BACK]Return to evbarm.mdwn CVS log [TXT] [DIR] Up to [NetBSD Developer Wiki] / wikisrc / ports

Diff for /wikisrc/ports/evbarm.mdwn between versions 1.27 and 1.48

version 1.27, 2015/11/02 10:57:41 version 1.48, 2018/07/19 10:15:05
Line 1 Line 1
 [[!template id=port  [[!template id=port
 port="evbarm"  port="evbarm"
 port_alt="arm"  port_alt="arm"
 cur_rel="7.0"    port_var1="arm"
 future_rel="7.0"  port_var2="armeb"
 changes_cur="6.0"  port_var3="earm"
 changes_future="7.0"  port_var4="earmeb"
   port_var5="earmv6hf"
   port_var6="earmv7hf"
   port_var7="earmv7hfeb"
   port_var_install_notes="evbarm-arm"
   cur_rel="8.0"
   future_rel="9.0"
   changes_cur="8.0"
   changes_future="9.0"
 thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"  thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
 about="""  about="""
 NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping  NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
Line 14  designs. Line 22  designs.
   
 Matt Thomas is the maintainer of NetBSD/evbarm.  Matt Thomas is the maintainer of NetBSD/evbarm.
   
   ### CPU types
   
   The evbarm port can be built with a variety of CPU options.  There are
   three main variables: the instruction set, the endianness, and whether
   there is hardware floating point.  By default the CPU type is "earm",
   and this implies little endian (el when explicitly stated), and soft
   (emulated) floating point.  Another example, suitable for Raspberry PI
   2, is earmv7hf, which is the v7 instruction set, little endian,
   and hardware floating point.
   
   Typically, various boards are best compiled with a CPU type that
   matches the board's CPU and floating point support, but generally a
   lower CPU instruction set version is workable on a newer board.  See
   build.sh and look for aliases for the evbarm port.
   
   ### Kernels and userland
   
   The evbarm userland can be used on any system that can run code of the
   CPU type used for the build.  Typically, a particular board requires a
   kernel for that board.
   
 ### Board specific information  ### Board specific information
    - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone and BeagleBone Black|BeagleBone]]   - [[BeagleBone and BeagleBone Black|BeagleBone]]
  - [[Cubieboard 2, Cubietruck, Cubieboard 4, and other Allwinner boards|Allwinner]]   - [[NVIDIA Tegra|Tegra]]
  - [[NVIDIA Jetson TK1|Tegra]]  
  - [[ODROID C1 and C1+|ODROID-C1]]   - [[ODROID C1 and C1+|ODROID-C1]]
  - [[Raspberry Pi and Pi 2|Raspberry Pi]]   - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]
   
 """  """
   
Line 29  supported_hardware=""" Line 58  supported_hardware="""
   
 [[!toc startlevel=3]]  [[!toc startlevel=3]]
   
 ### ADI Engineering **BRH** ("Big Red Head")   ### ADI Engineering **BRH** ("Big Red Head")
   
 The BRH is an evaluation and development platform for the Intel **i80200**  The BRH is an evaluation and development platform for the Intel **i80200**
 XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion  XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
Line 49  limited to 64M due to the layout of the  Line 78  limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the  systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.  BECC.
   
 ### Allwinner Technology A20/A31  ### Allwinner Technology
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.  Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
   
 ### Arcom **Viper**  ### Arcom **Viper**
Line 61  Support for the Arcom Viper was written  Line 90  Support for the Arcom Viper was written 
   
  * On-chip timers (_saost_ used as system clock)   * On-chip timers (_saost_ used as system clock)
  * On-chip serial ports (_com_)   * On-chip serial ports (_com_)
  * On-board SMC91C111 ethernet (_sm_)    * On-board SMC91C111 ethernet (_sm_)
   
 ### ARM, Ltd. **Integrator**  ### ARM, Ltd. **Integrator**
   
Line 111  Support for the gumstix was written by K Line 140  Support for the gumstix was written by K
  * netCF   * netCF
  * netDUO   * netDUO
  * netDUO-mmc   * netDUO-mmc
  * netMMC    * netMMC
   
 When booting, it is necessary to set these with u-boot dynamically.  When booting, it is necessary to set these with u-boot dynamically.
   
Line 127  When booting, it is necessary to set the Line 156  When booting, it is necessary to set the
   
 The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.  The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.
   
 ### Intel **DBPXA250** ("Lubbock")   ### Intel **DBPXA250** ("Lubbock")
   
 DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the  DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the
 Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).  Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).
Line 201  Support for the IXM1200 was written by I Line 230  Support for the IXM1200 was written by I
  * On-chip timers (ixpclk0 used as system clock)   * On-chip timers (ixpclk0 used as system clock)
  * On-chip serial port (_ixpcom_)   * On-chip serial port (_ixpcom_)
   
 ### NOVATEC **NTNP425B** ("ZAO425")   ### NOVATEC **NTNP425B** ("ZAO425")
   
 NTNP425B is an evaluation and development platform for the Intel **IXP425**  NTNP425B is an evaluation and development platform for the Intel **IXP425**
 XScale Core NetworkProcessor. NTNP425B is based on the reference board of  XScale Core NetworkProcessor. NTNP425B is based on the reference board of
Line 219  Support for the NTNP425B was written by  Line 248  Support for the NTNP425B was written by 
  * On-chip watchdog timer (_ixpwdog_)   * On-chip watchdog timer (_ixpwdog_)
   
 ### NVIDIA Tegra K1  ### NVIDIA Tegra K1
 Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current. The Jetson TK1 board is currently supported.  Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and
   8.0_BETA. The Jetson TK1 board is currently supported.
 ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**  
 The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported.  
   
 ### Rockchip PX2/RK3066/RK3188/RK3188+  ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3**
 Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel.  The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.  The Raspberry Pi, Pi 2, and Pi 3 are supported.
   
 ### Samsung **SMDK2410**  ### Samsung **SMDK2410**
   
Line 259  Fujitsu Component Ltd., and Genetec Corp Line 286  Fujitsu Component Ltd., and Genetec Corp
  * On-chip serial ports (_sscom_)   * On-chip serial ports (_sscom_)
  * On-chip Host-PCI bridge (_sspci_)   * On-chip Host-PCI bridge (_sspci_)
  * On-chip timers (used as system clock)   * On-chip timers (used as system clock)
  * Other devices inserted into the PCI slots    * Other devices inserted into the PCI slots
   
 ### Team ASA, Inc. **Npwr**  ### Team ASA, Inc. **Npwr**
   
Line 306  Support for the TS-7200 was written by J Line 333  Support for the TS-7200 was written by J
 """  """
 additional="""  additional="""
   * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)    * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)
   * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005.     * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005.
 """  """
 ]]  ]]
 [[!tag tier1port]]  [[!tag tier1port]]
Removed from v.1.27  
changed lines
  Added in v.1.48

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb