Diff for /wikisrc/ports/evbarm.mdwn between versions 1.42 and 1.43

version 1.42, 2017/10/21 22:39:47 version 1.43, 2017/10/21 22:43:03
Line 26  Matt Thomas is the maintainer of NetBSD/ Line 26  Matt Thomas is the maintainer of NetBSD/
   
 The evbarm port can be built with a variety of CPU options.  There are  The evbarm port can be built with a variety of CPU options.  There are
 three main variables: the instruction set, the endianness, and whether  three main variables: the instruction set, the endianness, and whether
 there is hardware flaoting point.  By default the CPU type is "earm".  there is hardware floating point.  By default the CPU type is "earm",
   and this implies little endian (el when explicitly stated), and soft
   (emulated) floating point.  Another example, suitable for Raspberry PI
   2, is earmv7hf, which is the v7 instruction support, little endian,
   and hardware floating point.
   
 Typically, various boards are best compiled with a CPU type that  Typically, various boards are best compiled with a CPU type that
 matches the board's CPU and floating point support, but generally a  matches the board's CPU and floating point support, but generally a
 lower CPU instruction set version is workable on a newer board.  See  lower CPU instruction set version is workable on a newer board.  See
 build.sh and look for aliases for the evbarm port.  build.sh and look for aliases for the evbarm port.
   
   ### Kernels and userland
   
   The evbarm userland can be used on any system that can run code of the
   CPU type used for the build.  Typically, a particular board requires a
   kernel for that board.
   
 ### Board specific information  ### Board specific information
  - [[Allwinner sunxi family SoCs|Allwinner]]   - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone and BeagleBone Black|BeagleBone]]   - [[BeagleBone and BeagleBone Black|BeagleBone]]

Removed from v.1.42  
changed lines
  Added in v.1.43


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb