Diff for /wikisrc/ports/evbarm.mdwn between versions 1.37 and 1.46

version 1.37, 2017/06/06 16:45:16 version 1.46, 2018/02/08 00:16:55
Line 9  port_var5="earmv6hf" Line 9  port_var5="earmv6hf"
 port_var6="earmv7hf"  port_var6="earmv7hf"
 port_var7="earmv7hfeb"  port_var7="earmv7hfeb"
 port_var_install_notes="evbarm-arm"  port_var_install_notes="evbarm-arm"
 cur_rel="7.1"  cur_rel="7.1.1"
 future_rel="8.0"  future_rel="8.0"
 changes_cur="7.0"  changes_cur="7.0"
 changes_future="8.0"  changes_future="8.0"
Line 22  designs. Line 22  designs.
   
 Matt Thomas is the maintainer of NetBSD/evbarm.  Matt Thomas is the maintainer of NetBSD/evbarm.
   
   ### CPU types
   
   The evbarm port can be built with a variety of CPU options.  There are
   three main variables: the instruction set, the endianness, and whether
   there is hardware floating point.  By default the CPU type is "earm",
   and this implies little endian (el when explicitly stated), and soft
   (emulated) floating point.  Another example, suitable for Raspberry PI
   2, is earmv7hf, which is the v7 instruction set, little endian,
   and hardware floating point.
   
   Typically, various boards are best compiled with a CPU type that
   matches the board's CPU and floating point support, but generally a
   lower CPU instruction set version is workable on a newer board.  See
   build.sh and look for aliases for the evbarm port.
   
   ### Kernels and userland
   
   The evbarm userland can be used on any system that can run code of the
   CPU type used for the build.  Typically, a particular board requires a
   kernel for that board.
   
 ### Board specific information  ### Board specific information
    - [[Allwinner sunxi family SoCs|Allwinner]]
  - [[BeagleBone and BeagleBone Black|BeagleBone]]   - [[BeagleBone and BeagleBone Black|BeagleBone]]
  - [[Cubieboard 2, Cubietruck, Cubieboard 4, Banana Pi, and other Allwinner boards|Allwinner]]   - [[NVIDIA Tegra|Tegra]]
  - [[NVIDIA Jetson TK1|Tegra]]  
  - [[ODROID C1 and C1+|ODROID-C1]]   - [[ODROID C1 and C1+|ODROID-C1]]
  - [[Raspberry Pi and Pi 2|Raspberry Pi]]   - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]]
   
 """  """
   
Line 57  limited to 64M due to the layout of the  Line 78  limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the  systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.  BECC.
   
 ### Allwinner Technology A20/A31  ### Allwinner Technology
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.  Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
   
 ### Arcom **Viper**  ### Arcom **Viper**
Line 230  Support for the NTNP425B was written by  Line 251  Support for the NTNP425B was written by 
 Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and  Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current and
 8.0_BETA. The Jetson TK1 board is currently supported.  8.0_BETA. The Jetson TK1 board is currently supported.
   
 ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**  ### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2**/**Raspberry Pi 3**
 The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported.  The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation.  The Raspberry Pi, Pi 2, and Pi 3 are supported.
   
 ### Rockchip PX2/RK3066/RK3188/RK3188+  
 Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel.  
   
 ### Samsung **SMDK2410**  ### Samsung **SMDK2410**
   

Removed from v.1.37  
changed lines
  Added in v.1.46


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb