--- wikisrc/ports/evbarm.mdwn	2015/07/22 19:34:18	1.23
+++ wikisrc/ports/evbarm.mdwn	2016/03/22 21:08:32	1.31
@@ -1,7 +1,15 @@
 [[!template id=port
 port="evbarm"
 port_alt="arm"
-cur_rel="6.1.5"  
+port_var1="arm"
+port_var2="armeb"
+port_var3="earm"
+port_var4="earmeb"
+port_var5="earmv6hf"
+port_var6="earmv7hf"
+port_var7="earmv7hfeb"
+port_var_install_notes="evbarm-arm"
+cur_rel="7.0"  
 future_rel="7.0"
 changes_cur="6.0"
 changes_future="7.0"
@@ -13,7 +21,16 @@ supports some specific embedded system p
 designs.
 
 Matt Thomas is the maintainer of NetBSD/evbarm.
+
+### Board specific information
+ - [[BeagleBone and BeagleBone Black|BeagleBone]]
+ - [[Cubieboard 2, Cubietruck, Cubieboard 4, Banana Pi, and other Allwinner boards|Allwinner]]
+ - [[NVIDIA Jetson TK1|Tegra]]
+ - [[ODROID C1 and C1+|ODROID-C1]]
+ - [[Raspberry Pi and Pi 2|Raspberry Pi]]
+
 """
+
 supported_hardware="""
 
 **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.
@@ -40,7 +57,7 @@ limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.
 
-### Allwinner Technology A10/A20/A31
+### Allwinner Technology A20/A31
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
 
 ### Arcom **Viper**
@@ -114,7 +131,7 @@ When booting, it is necessary to set the
  * GPSstix (GPS not test)
  * tweener
 
-### Hardkernel ODROID-C1
+### Hardkernel ODROID-C1 and ODROID-C1+
 
 The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.