--- wikisrc/ports/evbarm.mdwn 2015/10/08 06:42:53 1.25 +++ wikisrc/ports/evbarm.mdwn 2020/09/15 07:36:01 1.90 @@ -1,303 +1,76 @@ [[!template id=port port="evbarm" port_alt="arm" -cur_rel="7.0" -future_rel="7.0" -changes_cur="6.0" -changes_future="7.0" -thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif" +port_var1="earm" +port_var2="earmeb" +port_var3="earmv6hf" +port_var4="earmv7hf" +port_var5="earmv7hfeb" +port_var6="aarch64" +port_var_install_notes="evbarm-earm" +cur_rel="9.0" +future_rel="10.0" +changes_cur="9.0" +changes_future="10.0" +thumbnail="//www.netbsd.org/images/ports/evbarm/adi_brh.gif" about=""" -NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping -boards based on CPUs implementing the ARM architecture. NetBSD/evbarm also -supports some specific embedded system products based on prototype board -designs. - -Matt Thomas is the maintainer of NetBSD/evbarm. +NetBSD/evbarm is the port of NetBSD to various systems based on chips +implementing the ARM architecture. The "evb" component is a reference +to evaluation boards, the original target of the port, but this +is no longer relevant - NetBSD/evbarm now runs on a range of +hardware based on APCI or devicetrees, including a range of development +boards, powerful servers, virtual machines, and even some laptops. """ -supported_hardware=""" - -**NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS. - -[[!toc startlevel=3]] - -### ADI Engineering **BRH** ("Big Red Head") - -The BRH is an evaluation and development platform for the Intel **i80200** -XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion -Chip"). The BRH is capable of both big- and little-endian operation, although -NetBSD currently only supports little-endian operation. - -Support for the BRH was written by Jason Thorpe, and contributed by Wasabi -Systems, Inc. - - * On-board NS16550-compatible serial ports (_com_) - * On-board Intel i82559 Ethernet on the PCI bus (_fxp_) - * On-chip timer on the BECC (used as system clock) - * Other devices inserted into the PCI slot - -The BRH comes with 128M of SDRAM. Systems with BECC revision 7 or less are -limited to 64M due to the layout of the PCI DMA windows. Users of these -systems should obtain an FPGA upgrade from ADI to revision 8 or later of the -BECC. - -### Allwinner Technology A20/A31 -Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31. - -### Arcom **Viper** - -The Arcom Viper is a single board computer based on the PXA255 XScale -processor. - -Support for the Arcom Viper was written by Antti Kantee. - - * On-chip timers (_saost_ used as system clock) - * On-chip serial ports (_com_) - * On-board SMC91C111 ethernet (_sm_) - -### ARM, Ltd. **Integrator** - -The Integrator/AP is an ATX form-factor board that is used for development of -ARM processor-based designs. It supports up to four processors on plug-in core -modules, and provides clocks, a bus interface, and interrupt support. The -Integrator/AP also supports logic modules which provide additional -peripherals, and can accommodate up to three PCI expansion cards. The -Integrator/AP can also be inserted into a CompactPCI backplane. - -Support for the Integrator was written by Richard Earnshaw, and contributed by -ARM, Ltd. - - * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_) - * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_) - * PrimeCell PL181 MultiMedia Card Interface - * Other devices inserted into the PCI expansion slots - -### Atmark Techno **Armadillo-9** - -The Armadillo-9 is a single board computer based on the EP9315 processor. - -Support for the Armadillo-9 was written by Katsuomi Hamajima. - - * On-CPU RS232 UARTs (2) (_epcom_) - * On-CPU 10/100 Ethernet MAC (_epe_) - * system clock from on-CPU timers (_epclk_) - * CompactFlash socket (_eppcic_) - * USB 1.1 ports (_ohci_) - -### BeagleBoard.org **BeagleBoard** and **BeagleBoard-xM** -The [[BeagleBoard]] is a low-power open-source hardware single-board computer from BeagleBoard.org. - -### BeagleBoard.org **BeagleBone** and **BeagleBone Black** -The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard.org. - -### Gumstix, Inc. **gumstix** - -The [gumstix](http://www.gumstix.com/) is a small form-factor motherboard -based on the PXA255 and PXA270 XScale processor. Supports only PXA255 now. - -Support for the gumstix was written by KIYOHARA Takashi. - - * basix - * cfstix - * etherstix - * netCF - * netDUO - * netDUO-mmc - * netMMC - -When booting, it is necessary to set these with u-boot dynamically. - -
 > go 0xa0200000 busheader=basix
- - * audiostix - * console-st (waysmall - STUART) - * console-hw (waysmall) - * GPSstix (GPS not test) - * tweener - -### Hardkernel ODROID-C1 - -The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd. - -### Intel **DBPXA250** ("Lubbock") - -DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the -Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm). - -Support for the **DBPXA250** was written by Hiroyuki Bessho, and contributed -by Genetec Corp. - - * On-chip timers (_saost_ used as system clock) - * On-chip 2 serial port (_com_) - * On-board SMC91C96 ethernet (_sm_) - * On-board SA-1111 StrongArm companion chip (_sacc_) - * PS/2 keyboard (_pckbd_) - * 640x480 LCD (_lcd_) - * PCMCIA and CF card slots - -### Intel **IQ31244** - -The IQ31244 is a development platform for the Intel **IOP321** I/O Processor -chipset and the Intel **i31244** SATA controller. - -Initial support for the IQ31244 was written by Jason Thorpe, and contributed -by Wasabi Systems, Inc. - - * Quad on-board Intel i31244 SATA controllers on the PCI-X bus (_artsata_) - * On-board Intel i82546EB Gigabit Ethernet on the PCI-X bus (_wm_) - * On-board NS16550-compatible serial port (_com_) - * On-chip timers (TMR0 used as system clock) - * On-chip Application Accelerator Unit (_iopaau_) - * On-chip watchdog timer (_iopwdog_) - * On-board compact flash reader (_wdc_) - * Other devices inserted into the PCI-X expansion slot - -### Intel **IQ80310** - -The IQ80310 is the reference platform for the Intel **IOP310** I/O Processor -chipset, which is comprised of the i80200 XScale processor and the i80312 I/O -Companion chip. - -Support for the IQ80310 was written by Jason Thorpe and Allen Briggs, and -contributed by Wasabi Systems, Inc. - - * On-board Intel i82559 Ethernet on the PCI bus (_fxp_) - * On-board timer in the CPLD (used as system clock) - * On-board NS16550-compatible serial ports (_com_) - * Other devices inserted into the PCI expansion slots - -### Intel **IQ80321** - -The IQ80321 is the reference platform for the Intel **IOP321** I/O Processor -(i80321 XScale processor). - -Support for the IQ80321 was written by Jason Thorpe, and contributed by Wasabi -Systems, Inc. - - * On-board Intel i82544EI Gigabit Ethernet on the PCI-X bus (_wm_) - * On-board NS16550-compatible serial port (_com_) - * On-chip timers (TMR0 used as system clock) - * On-chip Application Accelerator Unit (_iopaau_) - * On-chip watchdog timer (_iopwdog_) - * Other devices inserted into the PCI-X expansion slots - -### Intel **IXM1200** - -The IXM1200 is the reference platform for the Intel **IXP1200** Network -Processor. - -Support for the IXM1200 was written by Ichiro FUKUHARA and Naoto Shimazaki. - - * On-board Intel i82559 Ethernet on the PCI bus (_fxp_) - * On-board Intel i21555 Non-Transparent PCI-PCI Bridge (_nppb_) - * On-chip timers (ixpclk0 used as system clock) - * On-chip serial port (_ixpcom_) - -### NOVATEC **NTNP425B** ("ZAO425") - -NTNP425B is an evaluation and development platform for the Intel **IXP425** -XScale Core NetworkProcessor. NTNP425B is based on the reference board of -Intel **IXDP425**. The **NTNP425B** is capable of only big-endian operation. -Since the library for micro-engine(NPE) offered from Intel Corp. is big- -endian. More information about the **NTNP425B** can be found on [product -catalogue of **NTNP425B**(2.5MB,PDF -file)](http://www.novatec.co.jp/NTNP425BBrochureE.pdf). - -Support for the NTNP425B was written by Ichiro FUKUHARA. - - * On-chip timers (_ixpclk0_ used as system clock) - * On-chip 2 serial port (_ixpcom0_ and _ixpcom1_) - * Other devices inserted into the PCI/mPCI slot - * On-chip watchdog timer (_ixpwdog_) - -### NVIDIA Tegra K1 -Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current. The Jetson TK1 board is currently supported. - -### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2** -The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported. - -### Rockchip PX2/RK3066/RK3188/RK3188+ -Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel. - -### Samsung **SMDK2410** - -The SMDK2410 is the reference platform for the Samsung **S3C2410** processor, -which has an ARM920T core. - -More information on the S3C2410 can be found at [Samsung Electronics web page] -(http://www.samsung.com/Products/Semiconductor/MobileSoC/ApplicationProcessor/ -ARM9Series/S3C2410/S3C2410.htm). +]] -Support for the SMDK2410 was written by Hiroyuki Bessho, and contributed by -Genetec Corp. +### CPU types - * On-chip serial ports (_sscom_) - * On-chip USB host controller (_ohc_) - * On-chip timers (used as system clock) - * On-chip SPI (_ssspi_, used for other on-board devices) - * 240x320 TFT LCD (_lcd_) - * keyboard. (_sskbd_) +Various CPU variants are supported, e.g: -### Samsung **SMDK2800** +- evbarm-earmv6hf - ARMv6 with EABI and hardware floating point, e.g. + the original Raspberry Pi. +- evbarm-earmv7hf - ARMv7 with EABI and hardware floating point, e.g. + most recent and common 32-bit ARM boards. +- evbarm-earmv7hfeb - Same as the above, but with the CPU running in + big endian mode. +- evbarm-aarch64 - 64-bit ARMv8 +- evbarm-aarch64eb - Same as the above, but with the CPU running in + big endian mode. -The SMDK2800 is the reference platform for the **Samsung S3C2800** processor, -which has an ARM920T core. +Since NetBSD 9.0, 64-bit ARM processors are supported (referred to here +as aarch64). These run with fully 64-bit kernels and userland. Running +32-bit ARM binaries is also supported with `compat32`. -S3C2800 has built-in PCI controller, and SMDK2800 has three PCI slots. +evbarm variants are little endian unless otherwise stated. NetBSD provides +big endian images primarily for testing purposes and to ensure that the code +is endian-clean. -Support for the SMDK2800 was written by Hiroyuki Bessho, and contributed by -Fujitsu Component Ltd., and Genetec Corp. +### armbsd.org builds - * On-chip serial ports (_sscom_) - * On-chip Host-PCI bridge (_sspci_) - * On-chip timers (used as system clock) - * Other devices inserted into the PCI slots +NetBSD developer Jared McNeill provides [builds of NetBSD 9 and -current for a vast variety of hardware.](https://www.armbsd.org/) In addition to the standard build, these images have board-specific U-Boot contents. See also /usr/pkgsrc/sysutils/u-boot*. -### Team ASA, Inc. **Npwr** +### Board specific information (often including installation information) -The Npwr is an IOP310-based design targeted at the network-attached storage -space. The Npwr comes in several configurations (single or dual Gigabit -Ethernet, single or dual Ultra160 SCSI), and can be purchased as a bare board -or as a small server appliance. More information on the Npwr can be found at -the [Team ASA web page](http://www.teamasa.com/). + - [[Allwinner sunxi family SoCs|Allwinner]] + - [[BeagleBone, BeagleBone Black, and PocketBeagle|BeagleBone]] + - [[NVIDIA Tegra|Tegra]] + - [[ODROID C1 and C1+|ODROID-C1]] + - [[Raspberry Pi 1, 2 and 3|Raspberry Pi]] + - [[RockChip SoCs|RockChip]] + - [[Terasic DE0 Nano-SoC|Cyclone5]] -Support for the Npwr was written by Jason Thorpe and Allen Briggs, and -contributed by Wasabi Systems, Inc. +**NOTE**: This list is incomplete. For a full list of supported boards, please see the list of [32-bit](https://github.com/NetBSD/src/blob/netbsd-9/sys/arch/evbarm/conf/GENERIC#L18) and [64-bit](https://github.com/NetBSD/src/blob/netbsd-9/sys/arch/evbarm/conf/GENERIC64#L20) device trees. - * On-board Intel i82544 Gigabit Ethernet on the PCI bus (_wm_) - * On-board LSI Logic 53c1010 Ultra160 SCSI on the PCI bus (_siop_) - * On-board timer in the CPLD (used as system clock) - * On-board NS16550-compatible serial port (_com_) +### QEMU -### Technologic Systems **TS-7200** +See the [[NetBSD/evbarm under QEMU|qemu_arm]] page for instructions on how to get started with QEMU. -The TS-7200 is a low-cost mass-produced PC/104 embedded single board computer -intended as a general purpose core for real embedded applications. The TS-7200 -uses the Cirrus Logic EP9302 ARM9 system-on-chip and comes with a PC/104 (isa) -bus and can either boot to CompactFlash or onboard flash. The board also has -general purpose digital IO and optional multichannel analog-to-digital -converters. More information on the TS-7200 can be found at [Technologic -Systems](http://www.embeddedarm.com/epc/ts7200-spec-h.html). +### anita -Support for the TS-7200 was written by Jesse Off +anita can be used to test builds. (In addition to anita, install qemu and dtb-arm-vexpress from pkgsrc.) The release subdirectory should follow the naming convention on the autobuild cluster, used below. -* On-CPU RS232 UARTs (2) (_epcom_) -* On-CPU 10/100 Ethernet MAC (_epe_) -* CompactFlash socket (_wdc_) -* USB 1.1 ports (2) (_ohci_) -* Watchdog timer on CPLD (_tspld_) -* TMP124 high precision temperature sensor via sysctl -* 64Hz system clock from on-CPU timers (_epclk_) -* HD44780 2x24 text mode LCD (_tslcd_) -* 4x4 16 button matrix keypad (_wskbd_) -* TS-5620 battery backed RTC daughter-card (_tsrtc_) -* 1,2,4 port serial TS-SER daughter cards (_com_) -* Up to 4 10Mb TS-ETH10 daughter cards (_tscs_) -* Other devices inserted into the PC/104 (_isa_) expansion slot + - evbarm-earmv7hf uses "qemu-system-arm -M vexpress-a15" + - evbarm-aarch64 uses "qemu-system-aarch64 -M virt" + - Information on how to test emulated versions of other specific hardware is welcome. -""" -additional=""" - * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/) - * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. -""" -]] [[!tag tier1port]]