--- wikisrc/ports/evbarm.mdwn 2014/11/06 16:46:23 1.13 +++ wikisrc/ports/evbarm.mdwn 2015/10/08 06:42:53 1.25 @@ -1,7 +1,7 @@ [[!template id=port port="evbarm" port_alt="arm" -cur_rel="6.1.5" +cur_rel="7.0" future_rel="7.0" changes_cur="6.0" changes_future="7.0" @@ -16,6 +16,8 @@ Matt Thomas is the maintainer of NetBSD/ """ supported_hardware=""" +**NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS. + [[!toc startlevel=3]] ### ADI Engineering **BRH** ("Big Red Head") @@ -23,9 +25,7 @@ supported_hardware=""" The BRH is an evaluation and development platform for the Intel **i80200** XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion Chip"). The BRH is capable of both big- and little-endian operation, although -NetBSD currently only supports little-endian operation. More information about -the BRH can be found on [ADI Engineering's web -page](http://www.adiengineering.com/productsBRH.html). +NetBSD currently only supports little-endian operation. Support for the BRH was written by Jason Thorpe, and contributed by Wasabi Systems, Inc. @@ -40,8 +40,8 @@ limited to 64M due to the layout of the systems should obtain an FPGA upgrade from ADI to revision 8 or later of the BECC. -### Allwinner Technology A10/A20/A31 -Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard, Cubieboard 2, Cubietruck, and Merrii Hummingbird A31. +### Allwinner Technology A20/A31 +Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31. ### Arcom **Viper** @@ -68,6 +68,7 @@ ARM, Ltd. * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_) * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_) + * PrimeCell PL181 MultiMedia Card Interface * Other devices inserted into the PCI expansion slots ### Atmark Techno **Armadillo-9** @@ -82,8 +83,11 @@ Support for the Armadillo-9 was written * CompactFlash socket (_eppcic_) * USB 1.1 ports (_ohci_) -### BeagleBoard.org **BeagleBone** -The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard. +### BeagleBoard.org **BeagleBoard** and **BeagleBoard-xM** +The [[BeagleBoard]] is a low-power open-source hardware single-board computer from BeagleBoard.org. + +### BeagleBoard.org **BeagleBone** and **BeagleBone Black** +The [[BeagleBone]] is a low-cost credit-card-sized computer from BeagleBoard.org. ### Gumstix, Inc. **gumstix** @@ -110,6 +114,10 @@ When booting, it is necessary to set the * GPSstix (GPS not test) * tweener +### Hardkernel ODROID-C1 + +The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd. + ### Intel **DBPXA250** ("Lubbock") DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the @@ -201,8 +209,14 @@ Support for the NTNP425B was written by * Other devices inserted into the PCI/mPCI slot * On-chip watchdog timer (_ixpwdog_) -### Raspberry Pi Foundation **Raspberry Pi** -The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. +### NVIDIA Tegra K1 +Support for NVIDIA [[Tegra]] K1 SoCs is present in NetBSD-current. The Jetson TK1 board is currently supported. + +### Raspberry Pi Foundation **Raspberry Pi**/**Raspberry Pi 2** +The [[Raspberry Pi]] is a low-cost credit-card-sized computer from the Raspberry Pi Foundation. Both the Raspberry Pi and Raspberry Pi 2 are supported. + +### Rockchip PX2/RK3066/RK3188/RK3188+ +Various [[Rockchip]] family SoCs are supported by the ROCKCHIP kernel. ### Samsung **SMDK2410** @@ -282,7 +296,7 @@ Support for the TS-7200 was written by J """ additional=""" - * The [NetBSD Diskless HOWTO](/docs/network/netboot/) + * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/) * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. """ ]]