--- wikisrc/ports/evbarm.mdwn	2015/05/04 10:47:18	1.20
+++ wikisrc/ports/evbarm.mdwn	2017/03/30 16:06:58	1.36
@@ -1,10 +1,18 @@
 [[!template id=port
 port="evbarm"
 port_alt="arm"
-cur_rel="6.1.5"  
-future_rel="7.0"
-changes_cur="6.0"
-changes_future="7.0"
+port_var1="arm"
+port_var2="armeb"
+port_var3="earm"
+port_var4="earmeb"
+port_var5="earmv6hf"
+port_var6="earmv7hf"
+port_var7="earmv7hfeb"
+port_var_install_notes="evbarm-arm"
+cur_rel="7.1"
+future_rel="8.0"
+changes_cur="7.0"
+changes_future="8.0"
 thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
 about="""
 NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
@@ -13,21 +21,28 @@ supports some specific embedded system p
 designs.
 
 Matt Thomas is the maintainer of NetBSD/evbarm.
+
+### Board specific information
+ - [[BeagleBone and BeagleBone Black|BeagleBone]]
+ - [[Cubieboard 2, Cubietruck, Cubieboard 4, Banana Pi, and other Allwinner boards|Allwinner]]
+ - [[NVIDIA Jetson TK1|Tegra]]
+ - [[ODROID C1 and C1+|ODROID-C1]]
+ - [[Raspberry Pi and Pi 2|Raspberry Pi]]
+
 """
+
 supported_hardware="""
 
 **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.
 
 [[!toc startlevel=3]]
 
-### ADI Engineering **BRH** ("Big Red Head") 
+### ADI Engineering **BRH** ("Big Red Head")
 
 The BRH is an evaluation and development platform for the Intel **i80200**
 XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
 Chip"). The BRH is capable of both big- and little-endian operation, although
-NetBSD currently only supports little-endian operation. More information about
-the BRH can be found on [ADI Engineering's web
-page](http://www.adiengineering.com/productsBRH.html).
+NetBSD currently only supports little-endian operation.
 
 Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
 Systems, Inc.
@@ -42,7 +57,7 @@ limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.
 
-### Allwinner Technology A10/A20/A31
+### Allwinner Technology A20/A31
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
 
 ### Arcom **Viper**
@@ -54,7 +69,7 @@ Support for the Arcom Viper was written 
 
  * On-chip timers (_saost_ used as system clock)
  * On-chip serial ports (_com_)
- * On-board SMC91C111 ethernet (_sm_) 
+ * On-board SMC91C111 ethernet (_sm_)
 
 ### ARM, Ltd. **Integrator**
 
@@ -70,6 +85,7 @@ ARM, Ltd.
 
  * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
  * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
+ * PrimeCell PL181 MultiMedia Card Interface
  * Other devices inserted into the PCI expansion slots
 
 ### Atmark Techno **Armadillo-9**
@@ -103,7 +119,7 @@ Support for the gumstix was written by K
  * netCF
  * netDUO
  * netDUO-mmc
- * netMMC 
+ * netMMC
 
 When booting, it is necessary to set these with u-boot dynamically.
 
@@ -115,11 +131,11 @@ When booting, it is necessary to set the
  * GPSstix (GPS not test)
  * tweener
 
-### Hardkernel ODROID-C1
+### Hardkernel ODROID-C1 and ODROID-C1+
 
 The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.
 
-### Intel **DBPXA250** ("Lubbock") 
+### Intel **DBPXA250** ("Lubbock")
 
 DBPXA250 (a.k.a. Lubbock) is an evaluation and development platform for the
 Intel **PXA250** XScale Core application processor. More information about the **DBPXA250** can be found at [Intel website](http://www.intel.com/design/pca/applicationsprocessors/swsup/index.htm).
@@ -193,7 +209,7 @@ Support for the IXM1200 was written by I
  * On-chip timers (ixpclk0 used as system clock)
  * On-chip serial port (_ixpcom_)
 
-### NOVATEC **NTNP425B** ("ZAO425") 
+### NOVATEC **NTNP425B** ("ZAO425")
 
 NTNP425B is an evaluation and development platform for the Intel **IXP425**
 XScale Core NetworkProcessor. NTNP425B is based on the reference board of
@@ -251,7 +267,7 @@ Fujitsu Component Ltd., and Genetec Corp
  * On-chip serial ports (_sscom_)
  * On-chip Host-PCI bridge (_sspci_)
  * On-chip timers (used as system clock)
- * Other devices inserted into the PCI slots 
+ * Other devices inserted into the PCI slots
 
 ### Team ASA, Inc. **Npwr**
 
@@ -297,8 +313,8 @@ Support for the TS-7200 was written by J
 
 """
 additional="""
-  * The [NetBSD Diskless HOWTO](/docs/network/netboot/)
-  * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. 
+  * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)
+  * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005.
 """
 ]]
 [[!tag tier1port]]