Diff for /wikisrc/ports/evbarm.mdwn between versions 1.20 and 1.33

version 1.20, 2015/05/04 10:47:18 version 1.33, 2016/06/21 09:32:43
Line 1 Line 1
 [[!template id=port  [[!template id=port
 port="evbarm"  port="evbarm"
 port_alt="arm"  port_alt="arm"
 cur_rel="6.1.5"    port_var1="arm"
 future_rel="7.0"  port_var2="armeb"
 changes_cur="6.0"  port_var3="earm"
 changes_future="7.0"  port_var4="earmeb"
   port_var5="earmv6hf"
   port_var6="earmv7hf"
   port_var7="earmv7hfeb"
   port_var_install_notes="evbarm-arm"
   cur_rel="7.0.1"
   future_rel="8.0"
   changes_cur="7.0"
   changes_future="8.0"
 thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"  thumbnail="http://www.netbsd.org/images/ports/evbarm/adi_brh.gif"
 about="""  about="""
 NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping  NetBSD/evbarm is the port of NetBSD to various evaluation and prototyping
Line 13  supports some specific embedded system p Line 21  supports some specific embedded system p
 designs.  designs.
   
 Matt Thomas is the maintainer of NetBSD/evbarm.  Matt Thomas is the maintainer of NetBSD/evbarm.
   
   ### Board specific information
    - [[BeagleBone and BeagleBone Black|BeagleBone]]
    - [[Cubieboard 2, Cubietruck, Cubieboard 4, Banana Pi, and other Allwinner boards|Allwinner]]
    - [[NVIDIA Jetson TK1|Tegra]]
    - [[ODROID C1 and C1+|ODROID-C1]]
    - [[Raspberry Pi and Pi 2|Raspberry Pi]]
   
 """  """
   
 supported_hardware="""  supported_hardware="""
   
 **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.  **NOTE**: This list is incomplete. For a full list of configurations, please see the [evbarm kernel configs](http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/evbarm/conf/) directory in CVS.
Line 25  supported_hardware=""" Line 42  supported_hardware="""
 The BRH is an evaluation and development platform for the Intel **i80200**  The BRH is an evaluation and development platform for the Intel **i80200**
 XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion  XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
 Chip"). The BRH is capable of both big- and little-endian operation, although  Chip"). The BRH is capable of both big- and little-endian operation, although
 NetBSD currently only supports little-endian operation. More information about  NetBSD currently only supports little-endian operation.
 the BRH can be found on [ADI Engineering's web  
 page](http://www.adiengineering.com/productsBRH.html).  
   
 Support for the BRH was written by Jason Thorpe, and contributed by Wasabi  Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
 Systems, Inc.  Systems, Inc.
Line 42  limited to 64M due to the layout of the  Line 57  limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the  systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.  BECC.
   
 ### Allwinner Technology A10/A20/A31  ### Allwinner Technology A20/A31
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.  Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
   
 ### Arcom **Viper**  ### Arcom **Viper**
Line 70  ARM, Ltd. Line 85  ARM, Ltd.
   
  * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)   * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
  * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)   * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
    * PrimeCell PL181 MultiMedia Card Interface
  * Other devices inserted into the PCI expansion slots   * Other devices inserted into the PCI expansion slots
   
 ### Atmark Techno **Armadillo-9**  ### Atmark Techno **Armadillo-9**
Line 115  When booting, it is necessary to set the Line 131  When booting, it is necessary to set the
  * GPSstix (GPS not test)   * GPSstix (GPS not test)
  * tweener   * tweener
   
 ### Hardkernel ODROID-C1  ### Hardkernel ODROID-C1 and ODROID-C1+
   
 The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.  The [[ODROID-C1]] is a quad core Cortex-A5 small form-factor board from Hardkernel co., Ltd.
   
Line 297  Support for the TS-7200 was written by J Line 313  Support for the TS-7200 was written by J
   
 """  """
 additional="""  additional="""
   * The [NetBSD Diskless HOWTO](/docs/network/netboot/)    * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)
   * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005.     * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. 
 """  """
 ]]  ]]

Removed from v.1.20  
changed lines
  Added in v.1.33


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb