--- wikisrc/ports/evbarm.mdwn	2015/05/04 10:47:18	1.20
+++ wikisrc/ports/evbarm.mdwn	2015/08/03 14:25:44	1.24
@@ -25,9 +25,7 @@ supported_hardware="""
 The BRH is an evaluation and development platform for the Intel **i80200**
 XScale processor. The BRH is based on ADI's **BECC** ("Big Endian Companion
 Chip"). The BRH is capable of both big- and little-endian operation, although
-NetBSD currently only supports little-endian operation. More information about
-the BRH can be found on [ADI Engineering's web
-page](http://www.adiengineering.com/productsBRH.html).
+NetBSD currently only supports little-endian operation.
 
 Support for the BRH was written by Jason Thorpe, and contributed by Wasabi
 Systems, Inc.
@@ -42,7 +40,7 @@ limited to 64M due to the layout of the 
 systems should obtain an FPGA upgrade from ADI to revision 8 or later of the
 BECC.
 
-### Allwinner Technology A10/A20/A31
+### Allwinner Technology A20/A31
 Various boards based on [[Allwinner]] SoCs are supported, including the BananaPi, Cubieboard 2, Cubietruck, Cubieboard 4, and Merrii Hummingbird A31.
 
 ### Arcom **Viper**
@@ -70,6 +68,7 @@ ARM, Ltd.
 
  * PrimeCell PL010 UARTs in the System Controller FPGA (_plcom_)
  * PrimeCell PL030 Real-time Clock in the System Controller FPGA (_plrtc_)
+ * PrimeCell PL181 MultiMedia Card Interface
  * Other devices inserted into the PCI expansion slots
 
 ### Atmark Techno **Armadillo-9**
@@ -297,7 +296,7 @@ Support for the TS-7200 was written by J
 
 """
 additional="""
-  * The [NetBSD Diskless HOWTO](/docs/network/netboot/)
+  * The [NetBSD Diskless HOWTO](http://www.netbsd.org/docs/network/netboot/)
   * [ Porting NetBSD/evbarm to the Arcom Viper](http://www.cs.hut.fi/~pooka/pubs/EuroBSDCon2005/viper.pdf), presented at EuroBSDCon 2005. 
 """
 ]]