wikisrc/ports/amiga.mdwn - view

File: [NetBSD Developer Wiki] / wikisrc / ports / amiga.mdwn
Revision 1.2: download - view: text, annotated - select for diffs
Thu Dec 20 14:50:01 2012 UTC (10 years, 1 month ago) by mspo
Branches: MAIN
CVS tags: HEAD

fix a footer link

1: [[!template id=port 2: port="amiga" 3: cur_rel="6.0" 4: future_rel="7.0" 5: changes_cur="6.0" 6: changes_future="7.0" 7: thumbnail="http://www.netbsd.org/images/ports/amiga/header.gif" 8: about=""" 9: NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by 10: Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by 11: [MacroSystem GmbH](http://www.macrosystem.de/). 12: 13: Development activity on NetBSD/amiga continues at a speed dependent on people's 14: spare time. Currently, NetBSD/amiga runs on any Amiga <sup>[\[1\]](#ftn.gvp-accelerator)</sup><a name="gvp-accelerator"></a> 15: that has a Motorola 68020 or better CPU with some form of MMU, and on 68060 16: DraCos. For 68020 and 68030 systems, a FPU is recommended but not required. 17: 68LC040, 68040V and 68LC060 systems don't work correctly at the moment. 18: 19: Due to the MMU requirement, it will not run on A500, A600, A1000, A1200, A2000, 20: A4000/EC030, CDTV or CD32 out of the box. You must install a CPU board on them 21: to run NetBSD. 22: 23: The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space 24: needed is about 250 MB, depending on how much system components you install. 25: Check the install document for more details. 26: """ 27: supported_hardware=""" 28: 29: * IDE controllers: 30: * A4000/A1200 builtin 31: * Buddha, Catweasel/Z2 32: * ELBOX FastATA 1200 (Mk-III, Mk-IV) (6.0) 33: * Individual Computers X-Surf IDE controller (current) 34: 35: * SCSI host adapters: 36: * 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo 37: accellerator, GVP series II 38: * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync, 39: Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a> 40: * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+ (6.0), Magnum, Warp 41: Engine, Zeus, DraCo builtin SCSI 42: * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV, 43: Blizzard 2060, CyberSCSI Mk I and II 44: * Cyberstorm Mk III / Cyberstorm PPC 45: 46: * PCI bridges: 47: * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2, 48: Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX 49: * Phase5 PCI bridge: CyberVision PPC (6.0), BlizzardVision PPC (6.0), G-REX 50: 1200 (current), G-REX 4000 (current), 51: * Prometheus PCI bridge (6.0) 52: 53: * Clockports: 54: * Amiga 1200 on-board clockport (current) 55: * Generic Zorro-based clockport (currently X-Surf only) (current) 56: 57: * Video controllers: 58: * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a> 59: * A2410 <sup>[\[5\]](#ftn.no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a> 60: * Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV, 61: Piccolo, Piccolo SD64 62: * CyberVision 64 63: * CyberVision 64/3D 64: * CyberVision PPC, BlizzardVision PPC (6.0) <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a> 65: * ECS, AGA and A2024 built in on various Amigas 66: * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>, 67: Retina Z3, Altais 68: * Tseng ET4000 based boards: Domino and Domino16M proto, oMniBus, Merlin 69: 70: * Audio I/O: 71: * Amiga builtin (8bit and 14bit modes) 72: * Melody Mpeg-audio layer 2 board <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a> 73: * Repulse audio board 74: * Toccata audio board 75: 76: * Ethernet controllers: 77: * A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet 78: * AriadneII Ethernet 79: * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC 80: * Some PCMCIA cards in the A1200 (tested with a few network cards only) <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a> 81: * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> (6.0) 82: 83: * ARCnet controllers: 84: * A2060 ARCnet 85: 86: * ISDN controllers: 87: * BSC ISDN Master 88: * BSC ISDN Master II 89: * ITH ISDN Master II <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a> 90: * VMC ISDN Blaster 91: * Zeus Development ISDN link 92: * Individual Computers ISDN Surfer 93: 94: * Tape drives: 95: * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150 96: 97: * Scanners: With the machine independent PINT interface integrated, these should 98: work: 99: * SCSI-2 scanners behaving as SCSI-2 scanner devices 100: * HP Scanjet II <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a> 101: * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a> 102: 103: * CD-ROM drives: 104: * Most SCSI CD-ROM drives 105: 106: * Serial ports on these boards: 107: * Amiga builtin 108: * DraCo builtin, including serial mouse port 109: * A2232 (normal and turbo modes) 110: * MultiFaceCard II and III 111: * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport 112: models!) 113: * Individual Computers SilverSurfer (current) 114: 115: * Parallel printer ports on these boards: 116: * Amiga builtin 117: * DraCo builtin 118: * HyperCom 3+ and 4+ 119: * Amiga floppy drives with Amiga (880kB/1760kB) and IBM (720kB/1440 kB) block 120: encoding. 121: * Amiga mouse. 122: * Real-time clocks: A2000, A3000, A4000 builtin; DraCo builtin (r/o); 123: A2000-RTC-clone on some A1200 accelerator boards. 124: 125: <div class="footnotes"> 126: <hr width="100" align="left"> 127: <div id="ftn.gvp-accelerator" class="footnote"> 128: <p><a href="#gvp-accelerator" class="para"><sup class="para">[1] </sup></a>There has been a report that the GVP '030/50MHz accelerator only 129: works when all memory banks are switched to <span class="quote">“<span class="quote">Extended</span>”</span> 130: (J12?).</p> 131: </div> 132: <div id="ftn.emplant-scsi" class="footnote"> 133: <p><a href="#emplant-scsi" class="para"><sup class="para">[2] </sup></a>The Emplant SCSI adapter has been reported by a party to hang 134: after doing part of the installation without problems. 135: </p> 136: </div> 137: <div id="ftn.voodoo-footnote" class="footnote"> 138: <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with 139: wscons and only if installed in a compatible PCI bridge. Voodoo 4 140: and Voodoo 5 boards might work but are untested. X server is not 141: supported on Voodoo yet. Currently Voodoo needs initialization in 142: AmigaOS before starting the NetBSD (unless used with G-REX, which 143: does this on a firmware level).</p> 144: </div> 145: <div id="ftn.cvppc-footnote" class="footnote"> 146: <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only 147: with unaccelearted genfb driver. X server is not supported on 148: these cards yet.</p> 149: </div> 150: <div id="ftn.no-X-retina-a2410" class="footnote"> 151: <p><a href="#no-X-retina-a2410" class="para"><sup class="para">[5] </sup></a>No X server for Retina Z2 and A2410, currently.</p> 152: </div> 153: <div id="ftn.draco-zorro" class="footnote"> 154: <p><a href="#draco-zorro" class="para"><sup class="para">[6] </sup></a>The DraCo Zorro-2 bus does not recognize a couple of boards 155: (known: Melody Z2, ITH ISDN Master II). Worse: boards in 156: ConfigIn/ConfigOut order behind them won't be found, either. This 157: is not a NetBSD problem, but a design problem in the board (yes, 158: right).</p> 159: </div> 160: <div id="ftn.pcmcia-ethernet" class="footnote"> 161: <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to bugs in amiga-specific PCMCIA code only NE2000-compatible 162: cards are expected to work.</p> 163: </div> 164: <div id="ftn.pci-ethernet" class="footnote"> 165: <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a 166: compatible PCI bridge.</p> 167: </div> 168: <div id="ftn.scsi-scanners" class="footnote"> 169: <p><a href="#scsi-scanners" class="simpara"><sup class="simpara">[9] </sup></a>There are reports that the Mustek and HP Scanjet scanners 170: hang if accessed from the A3000. This might apply to other 171: 33C93-adapters, too.</p> 172: </div> 173: </div> 174: </div></div> 175: 176: """ 177: ]] 178: [[!tag tier2port]]