Annotation of wikisrc/ports/amiga.mdwn, revision 1.6

1.1       mspo        1: [[!template id=port
                      2: port="amiga"
1.6     ! ryoon       3: cur_rel="6.1.2"  
1.1       mspo        4: future_rel="7.0"
1.6     ! ryoon       5: pkg_rel="6.0"
1.1       mspo        6: changes_cur="6.0"
                      7: changes_future="7.0"
                      8: thumbnail="http://www.netbsd.org/images/ports/amiga/header.gif"
                      9: about="""
                     10: NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by
                     11: Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by
                     12: [MacroSystem GmbH](http://www.macrosystem.de/).
                     13: 
                     14: Development activity on NetBSD/amiga continues at a speed dependent on people's
                     15: spare time. Currently, NetBSD/amiga runs on any Amiga <sup>[\[1\]](#ftn.gvp-accelerator)</sup><a name="gvp-accelerator"></a>
                     16: that has a Motorola 68020 or better CPU with some form of MMU, and on 68060
                     17: DraCos. For 68020 and 68030 systems, a FPU is recommended but not required.
                     18: 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
                     19: 
                     20: Due to the MMU requirement, it will not run on A500, A600, A1000, A1200, A2000,
                     21: A4000/EC030, CDTV or CD32 out of the box. You must install a CPU board on them
                     22: to run NetBSD.
                     23: 
                     24: The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space
                     25: needed is about 250 MB, depending on how much system components you install.
                     26: Check the install document for more details. 
                     27: """
                     28: supported_hardware="""
                     29: 
                     30: * IDE controllers:
                     31:   * A4000/A1200 builtin
                     32:   * Buddha, Catweasel/Z2
                     33:   * ELBOX FastATA 1200 (Mk-III, Mk-IV) (6.0)
1.5       rkujawa    34:   * Individual Computers ACA500 CF controller (current)
1.1       mspo       35:   * Individual Computers X-Surf IDE controller (current)
                     36: 
                     37: * SCSI host adapters:
                     38:   * 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo
                     39:     accellerator, GVP series II
                     40:   * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync,
                     41:     Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a>
                     42:   * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+ (6.0), Magnum, Warp
                     43:     Engine, Zeus, DraCo builtin SCSI
                     44:   * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV,
                     45:     Blizzard 2060, CyberSCSI Mk I and II
                     46:   * Cyberstorm Mk III / Cyberstorm PPC
                     47: 
                     48: * PCI bridges:
                     49:   * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2,
                     50:     Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX
1.3       mspo       51:     Mediator PCI 4000D, Mediator PCI 3000D, Mediator 4000Di, Mediator 3/4000T
1.1       mspo       52:   * Phase5 PCI bridge: CyberVision PPC (6.0), BlizzardVision PPC (6.0), G-REX
                     53:     1200 (current), G-REX 4000 (current),
                     54:   * Prometheus PCI bridge (6.0)
                     55: 
                     56: * Clockports:
                     57:   * Amiga 1200 on-board clockport (current)
                     58:   * Generic Zorro-based clockport (currently X-Surf only) (current)
                     59: 
                     60: * Video controllers:
                     61:   * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a>
1.2       mspo       62:   * A2410 <sup>[\[5\]](#ftn.no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>
1.1       mspo       63:   * Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV,
                     64:     Piccolo, Piccolo SD64
                     65:   * CyberVision 64
                     66:   * CyberVision 64/3D
                     67:   * CyberVision PPC, BlizzardVision PPC (6.0) <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a>
                     68:   * ECS, AGA and A2024 built in on various Amigas
                     69:   * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>,
                     70:     Retina Z3, Altais
                     71:   * Tseng ET4000 based boards: Domino and Domino16M proto, oMniBus, Merlin
                     72: 
                     73: * Audio I/O:
                     74:   * Amiga builtin (8bit and 14bit modes)
                     75:   * Melody Mpeg-audio layer 2 board <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a>
                     76:   * Repulse audio board
                     77:   * Toccata audio board
                     78: 
                     79: * Ethernet controllers:
                     80:   * A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet
                     81:   * AriadneII Ethernet
                     82:   * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC
1.4       rkujawa    83:   * Individual Computers X-Surf 100 (current)
1.1       mspo       84:   * Some PCMCIA cards in the A1200 (tested with a few network cards only) <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a>
                     85:   * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> (6.0)
                     86: 
                     87: * ARCnet controllers:
                     88:   * A2060 ARCnet 
                     89: 
                     90: * ISDN controllers:
                     91:   * BSC ISDN Master
                     92:   * BSC ISDN Master II
                     93:   * ITH ISDN Master II <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a>
                     94:   * VMC ISDN Blaster
                     95:   * Zeus Development ISDN link
                     96:   * Individual Computers ISDN Surfer
                     97: 
                     98: * Tape drives:
                     99:   * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150 
                    100: 
                    101: * Scanners: With the machine independent PINT interface integrated, these should
                    102:   work:
                    103:   * SCSI-2 scanners behaving as SCSI-2 scanner devices
                    104:   * HP Scanjet II <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
                    105:   * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
                    106: 
                    107: * CD-ROM drives:
                    108:   * Most SCSI CD-ROM drives 
                    109: 
                    110: * Serial ports on these boards:
                    111:   * Amiga builtin
                    112:   * DraCo builtin, including serial mouse port
                    113:   * A2232 (normal and turbo modes)
                    114:   * MultiFaceCard II and III
                    115:   * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport
                    116:     models!)
                    117:   * Individual Computers SilverSurfer (current)
                    118: 
                    119: * Parallel printer ports on these boards:
                    120:   * Amiga builtin
                    121:   * DraCo builtin
                    122:   * HyperCom 3+ and 4+
                    123: * Amiga floppy drives with Amiga (880kB/1760kB) and IBM (720kB/1440 kB) block
                    124:   encoding.
                    125: * Amiga mouse.
                    126: * Real-time clocks: A2000, A3000, A4000 builtin; DraCo builtin (r/o);
                    127:   A2000-RTC-clone on some A1200 accelerator boards.
                    128: 
                    129: <div class="footnotes">
                    130: <hr width="100" align="left">
                    131: <div id="ftn.gvp-accelerator" class="footnote">
                    132:       <p><a href="#gvp-accelerator" class="para"><sup class="para">[1] </sup></a>There has been a report that the GVP '030/50MHz accelerator only
                    133:       works when all memory banks are switched to <span class="quote">&#8220;<span class="quote">Extended</span>&#8221;</span>
                    134:       (J12?).</p>
                    135:     </div>
                    136: <div id="ftn.emplant-scsi" class="footnote">
                    137:             <p><a href="#emplant-scsi" class="para"><sup class="para">[2] </sup></a>The Emplant SCSI adapter has been reported by a party to hang
                    138:             after doing part of the installation without problems.
                    139:             </p>
                    140:           </div>
                    141: <div id="ftn.voodoo-footnote" class="footnote">
                    142:               <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with 
                    143:              wscons and only if installed in a compatible PCI bridge. Voodoo 4
                    144:              and Voodoo 5 boards might work but are untested. X server is not 
                    145:              supported on Voodoo yet. Currently Voodoo needs initialization in
                    146:              AmigaOS before starting the NetBSD (unless used with G-REX, which
                    147:              does this on a firmware level).</p>
                    148:             </div>
                    149: <div id="ftn.cvppc-footnote" class="footnote">
                    150:               <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only
                    151:              with unaccelearted genfb driver. X server is not supported on 
                    152:              these cards yet.</p>
                    153:            </div>
                    154: <div id="ftn.no-X-retina-a2410" class="footnote">
                    155:               <p><a href="#no-X-retina-a2410" class="para"><sup class="para">[5] </sup></a>No X server for Retina Z2 and A2410, currently.</p>
                    156:             </div>
                    157: <div id="ftn.draco-zorro" class="footnote">
                    158:             <p><a href="#draco-zorro" class="para"><sup class="para">[6] </sup></a>The DraCo Zorro-2 bus does not recognize a couple of boards
                    159:             (known: Melody Z2, ITH ISDN Master II).  Worse: boards in
                    160:             ConfigIn/ConfigOut order behind them won't be found, either. This
                    161:             is not a NetBSD problem, but a design problem in the board (yes,
                    162:             right).</p>
                    163:           </div>
                    164: <div id="ftn.pcmcia-ethernet" class="footnote">
                    165:             <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to bugs in amiga-specific PCMCIA code only NE2000-compatible
                    166:            cards are expected to work.</p>
                    167:            </div>
                    168: <div id="ftn.pci-ethernet" class="footnote">
                    169:             <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a 
                    170:            compatible PCI bridge.</p>
                    171:            </div>
                    172: <div id="ftn.scsi-scanners" class="footnote">
                    173:             <p><a href="#scsi-scanners" class="simpara"><sup class="simpara">[9] </sup></a>There are reports that the Mustek and HP Scanjet scanners
                    174:             hang if accessed from the A3000. This might apply to other
                    175:             33C93-adapters, too.</p>
                    176:           </div>
                    177: </div>
                    178: </div></div>
                    179: 
                    180: """
                    181: ]]
                    182: [[!tag tier2port]]

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb