Annotation of wikisrc/ports/amiga.mdwn, revision 1.35

1.1       mspo        1: [[!template id=port
                      2: port="amiga"
1.35    ! martin      3: cur_rel="9.2"
1.23      martin      4: future_rel="10.0"
1.20      leot        5: pkg_rel="8.0"
1.35    ! martin      6: changes_cur="9.0"
1.23      martin      7: changes_future="10.0"
1.22      leot        8: thumbnail="//www.netbsd.org/images/ports/amiga/header.gif"
1.1       mspo        9: about="""
                     10: NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by
1.32      is         11: Commodore and [Amiga International] and to the DraCo by
1.1       mspo       12: [MacroSystem GmbH](http://www.macrosystem.de/).
                     13: 
                     14: Development activity on NetBSD/amiga continues at a speed dependent on people's
                     15: spare time. Currently, NetBSD/amiga runs on any Amiga <sup>[\[1\]](#ftn.gvp-accelerator)</sup><a name="gvp-accelerator"></a>
                     16: that has a Motorola 68020 or better CPU with some form of MMU, and on 68060
                     17: DraCos. For 68020 and 68030 systems, a FPU is recommended but not required.
                     18: 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
                     19: 
                     20: Due to the MMU requirement, it will not run on A500, A600, A1000, A1200, A2000,
                     21: A4000/EC030, CDTV or CD32 out of the box. You must install a CPU board on them
                     22: to run NetBSD.
                     23: 
                     24: The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space
1.10      snj        25: needed is about 250 MB, depending on how many system components you install.
1.16      sevan      26: Check the install document for more details.
1.1       mspo       27: """
                     28: supported_hardware="""
                     29: 
                     30: * IDE controllers:
                     31:   * A4000/A1200 builtin
                     32:   * Buddha, Catweasel/Z2
1.28      is         33:   * ELBOX FastATA 1200 (Mk-III, Mk-IV)
1.29      is         34:   * Individual Computers ACA500 CF controller
                     35:   * Individual Computers X-Surf IDE controller
1.1       mspo       36: 
                     37: * SCSI host adapters:
                     38:   * 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo
                     39:     accellerator, GVP series II
                     40:   * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync,
                     41:     Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a>
1.28      is         42:   * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+, Magnum, Warp
1.1       mspo       43:     Engine, Zeus, DraCo builtin SCSI
                     44:   * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV,
                     45:     Blizzard 2060, CyberSCSI Mk I and II
                     46:   * Cyberstorm Mk III / Cyberstorm PPC
                     47: 
                     48: * PCI bridges:
1.29      is         49:   * ELBOX Mediator PCI: Mediator PCI 1200, Mediator PCI 1200 LT2,
1.1       mspo       50:     Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX
1.3       mspo       51:     Mediator PCI 4000D, Mediator PCI 3000D, Mediator 4000Di, Mediator 3/4000T
1.28      is         52:   * Phase5 PCI bridge: CyberVision PPC, BlizzardVision PPC, G-REX
1.29      is         53:     1200, G-REX 4000
1.28      is         54:   * Prometheus PCI bridge
1.1       mspo       55: 
                     56: * Clockports:
1.28      is         57:   * Amiga 1200 on-board clockport
                     58:   * Generic Zorro-based clockport (currently X-Surf only)
1.1       mspo       59: 
                     60: * Video controllers:
1.29      is         61:   * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a>
1.2       mspo       62:   * A2410 <sup>[\[5\]](#ftn.no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>
1.1       mspo       63:   * Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV,
                     64:     Piccolo, Piccolo SD64
                     65:   * CyberVision 64
                     66:   * CyberVision 64/3D
1.28      is         67:   * CyberVision PPC, BlizzardVision PPC <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a>
1.1       mspo       68:   * ECS, AGA and A2024 built in on various Amigas
                     69:   * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>,
                     70:     Retina Z3, Altais
                     71:   * Tseng ET4000 based boards: Domino and Domino16M proto, oMniBus, Merlin
                     72: 
                     73: * Audio I/O:
                     74:   * Amiga builtin (8bit and 14bit modes)
                     75:   * Melody Mpeg-audio layer 2 board <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a>
                     76:   * Repulse audio board
                     77:   * Toccata audio board
                     78: 
                     79: * Ethernet controllers:
                     80:   * A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet
                     81:   * AriadneII Ethernet
                     82:   * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC
1.30      is         83:   * Individual Computers X-Surf 100
1.27      is         84:   * PCMCIA cards in the A1200 <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a>
1.28      is         85:   * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> 
1.1       mspo       86: 
                     87: * ARCnet controllers:
1.16      sevan      88:   * A2060 ARCnet
1.1       mspo       89: 
                     90: * Tape drives:
1.16      sevan      91:   * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150
1.1       mspo       92: 
                     93: * Scanners: With the machine independent PINT interface integrated, these should
                     94:   work:
                     95:   * SCSI-2 scanners behaving as SCSI-2 scanner devices
                     96:   * HP Scanjet II <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
                     97:   * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
                     98: 
                     99: * CD-ROM drives:
1.16      sevan     100:   * Most SCSI CD-ROM drives
1.1       mspo      101: 
                    102: * Serial ports on these boards:
                    103:   * Amiga builtin
                    104:   * DraCo builtin, including serial mouse port
                    105:   * A2232 (normal and turbo modes)
                    106:   * MultiFaceCard II and III
                    107:   * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport
                    108:     models!)
1.28      is        109:   * Individual Computers SilverSurfer
1.1       mspo      110: 
                    111: * Parallel printer ports on these boards:
                    112:   * Amiga builtin
                    113:   * DraCo builtin
                    114:   * HyperCom 3+ and 4+
                    115: * Amiga floppy drives with Amiga (880kB/1760kB) and IBM (720kB/1440 kB) block
                    116:   encoding.
                    117: * Amiga mouse.
                    118: * Real-time clocks: A2000, A3000, A4000 builtin; DraCo builtin (r/o);
                    119:   A2000-RTC-clone on some A1200 accelerator boards.
                    120: 
                    121: <div class="footnotes">
                    122: <hr width="100" align="left">
                    123: <div id="ftn.gvp-accelerator" class="footnote">
                    124:       <p><a href="#gvp-accelerator" class="para"><sup class="para">[1] </sup></a>There has been a report that the GVP '030/50MHz accelerator only
                    125:       works when all memory banks are switched to <span class="quote">&#8220;<span class="quote">Extended</span>&#8221;</span>
                    126:       (J12?).</p>
                    127:     </div>
                    128: <div id="ftn.emplant-scsi" class="footnote">
                    129:             <p><a href="#emplant-scsi" class="para"><sup class="para">[2] </sup></a>The Emplant SCSI adapter has been reported by a party to hang
                    130:             after doing part of the installation without problems.
                    131:             </p>
                    132:           </div>
                    133: <div id="ftn.voodoo-footnote" class="footnote">
1.16      sevan     134:               <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with
1.1       mspo      135:              wscons and only if installed in a compatible PCI bridge. Voodoo 4
1.16      sevan     136:              and Voodoo 5 boards might work but are untested. X server is not
1.1       mspo      137:              supported on Voodoo yet. Currently Voodoo needs initialization in
                    138:              AmigaOS before starting the NetBSD (unless used with G-REX, which
                    139:              does this on a firmware level).</p>
                    140:             </div>
                    141: <div id="ftn.cvppc-footnote" class="footnote">
                    142:               <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only
1.26      is        143:              with unaccelerated genfb driver. X server is not supported on
1.1       mspo      144:              these cards yet.</p>
                    145:            </div>
                    146: <div id="ftn.no-X-retina-a2410" class="footnote">
                    147:               <p><a href="#no-X-retina-a2410" class="para"><sup class="para">[5] </sup></a>No X server for Retina Z2 and A2410, currently.</p>
                    148:             </div>
                    149: <div id="ftn.draco-zorro" class="footnote">
                    150:             <p><a href="#draco-zorro" class="para"><sup class="para">[6] </sup></a>The DraCo Zorro-2 bus does not recognize a couple of boards
                    151:             (known: Melody Z2, ITH ISDN Master II).  Worse: boards in
                    152:             ConfigIn/ConfigOut order behind them won't be found, either. This
1.31      is        153:             is not a NetBSD problem, but a design problem in the board.</p>
1.1       mspo      154:           </div>
                    155: <div id="ftn.pcmcia-ethernet" class="footnote">
1.27      is        156:             <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to a bug in amiga-specific PCMCIA code only NE2000-compatible
1.25      is        157:            cards are expected to work on NetBSD-9.0/NetBSD-8.1 and earlier.</p>
1.1       mspo      158:            </div>
                    159: <div id="ftn.pci-ethernet" class="footnote">
1.16      sevan     160:             <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a
1.1       mspo      161:            compatible PCI bridge.</p>
                    162:            </div>
                    163: <div id="ftn.scsi-scanners" class="footnote">
                    164:             <p><a href="#scsi-scanners" class="simpara"><sup class="simpara">[9] </sup></a>There are reports that the Mustek and HP Scanjet scanners
                    165:             hang if accessed from the A3000. This might apply to other
                    166:             33C93-adapters, too.</p>
                    167:           </div>
                    168: </div>
                    169: </div></div>
                    170: 
                    171: """
                    172: ]]
                    173: [[!tag tier2port]]

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb