Annotation of wikisrc/ports/amiga.mdwn, revision 1.1

1.1     ! mspo        1: [[!template id=port
        !             2: port="amiga"
        !             3: cur_rel="6.0"  
        !             4: future_rel="7.0"
        !             5: changes_cur="6.0"
        !             6: changes_future="7.0"
        !             7: thumbnail="http://www.netbsd.org/images/ports/amiga/header.gif"
        !             8: about="""
        !             9: NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by
        !            10: Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by
        !            11: [MacroSystem GmbH](http://www.macrosystem.de/).
        !            12: 
        !            13: Development activity on NetBSD/amiga continues at a speed dependent on people's
        !            14: spare time. Currently, NetBSD/amiga runs on any Amiga <sup>[\[1\]](#ftn.gvp-accelerator)</sup><a name="gvp-accelerator"></a>
        !            15: that has a Motorola 68020 or better CPU with some form of MMU, and on 68060
        !            16: DraCos. For 68020 and 68030 systems, a FPU is recommended but not required.
        !            17: 68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
        !            18: 
        !            19: Due to the MMU requirement, it will not run on A500, A600, A1000, A1200, A2000,
        !            20: A4000/EC030, CDTV or CD32 out of the box. You must install a CPU board on them
        !            21: to run NetBSD.
        !            22: 
        !            23: The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space
        !            24: needed is about 250 MB, depending on how much system components you install.
        !            25: Check the install document for more details. 
        !            26: """
        !            27: supported_hardware="""
        !            28: 
        !            29: * IDE controllers:
        !            30:   * A4000/A1200 builtin
        !            31:   * Buddha, Catweasel/Z2
        !            32:   * ELBOX FastATA 1200 (Mk-III, Mk-IV) (6.0)
        !            33:   * Individual Computers X-Surf IDE controller (current)
        !            34: 
        !            35: * SCSI host adapters:
        !            36:   * 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo
        !            37:     accellerator, GVP series II
        !            38:   * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync,
        !            39:     Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a>
        !            40:   * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+ (6.0), Magnum, Warp
        !            41:     Engine, Zeus, DraCo builtin SCSI
        !            42:   * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV,
        !            43:     Blizzard 2060, CyberSCSI Mk I and II
        !            44:   * Cyberstorm Mk III / Cyberstorm PPC
        !            45: 
        !            46: * PCI bridges:
        !            47:   * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2,
        !            48:     Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX
        !            49:   * Phase5 PCI bridge: CyberVision PPC (6.0), BlizzardVision PPC (6.0), G-REX
        !            50:     1200 (current), G-REX 4000 (current),
        !            51:   * Prometheus PCI bridge (6.0)
        !            52: 
        !            53: * Clockports:
        !            54:   * Amiga 1200 on-board clockport (current)
        !            55:   * Generic Zorro-based clockport (currently X-Surf only) (current)
        !            56: 
        !            57: * Video controllers:
        !            58:   * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a>
        !            59:   * A2410 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>
        !            60:   * Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV,
        !            61:     Piccolo, Piccolo SD64
        !            62:   * CyberVision 64
        !            63:   * CyberVision 64/3D
        !            64:   * CyberVision PPC, BlizzardVision PPC (6.0) <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a>
        !            65:   * ECS, AGA and A2024 built in on various Amigas
        !            66:   * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>,
        !            67:     Retina Z3, Altais
        !            68:   * Tseng ET4000 based boards: Domino and Domino16M proto, oMniBus, Merlin
        !            69: 
        !            70: * Audio I/O:
        !            71:   * Amiga builtin (8bit and 14bit modes)
        !            72:   * Melody Mpeg-audio layer 2 board <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a>
        !            73:   * Repulse audio board
        !            74:   * Toccata audio board
        !            75: 
        !            76: * Ethernet controllers:
        !            77:   * A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet
        !            78:   * AriadneII Ethernet
        !            79:   * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC
        !            80:   * Some PCMCIA cards in the A1200 (tested with a few network cards only) <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a>
        !            81:   * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> (6.0)
        !            82: 
        !            83: * ARCnet controllers:
        !            84:   * A2060 ARCnet 
        !            85: 
        !            86: * ISDN controllers:
        !            87:   * BSC ISDN Master
        !            88:   * BSC ISDN Master II
        !            89:   * ITH ISDN Master II <sup>[\[6\]](#ftn.draco-zorro)</sup><a name="draco-zorro"></a>
        !            90:   * VMC ISDN Blaster
        !            91:   * Zeus Development ISDN link
        !            92:   * Individual Computers ISDN Surfer
        !            93: 
        !            94: * Tape drives:
        !            95:   * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150 
        !            96: 
        !            97: * Scanners: With the machine independent PINT interface integrated, these should
        !            98:   work:
        !            99:   * SCSI-2 scanners behaving as SCSI-2 scanner devices
        !           100:   * HP Scanjet II <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
        !           101:   * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
        !           102: 
        !           103: * CD-ROM drives:
        !           104:   * Most SCSI CD-ROM drives 
        !           105: 
        !           106: * Serial ports on these boards:
        !           107:   * Amiga builtin
        !           108:   * DraCo builtin, including serial mouse port
        !           109:   * A2232 (normal and turbo modes)
        !           110:   * MultiFaceCard II and III
        !           111:   * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport
        !           112:     models!)
        !           113:   * Individual Computers SilverSurfer (current)
        !           114: 
        !           115: * Parallel printer ports on these boards:
        !           116:   * Amiga builtin
        !           117:   * DraCo builtin
        !           118:   * HyperCom 3+ and 4+
        !           119: * Amiga floppy drives with Amiga (880kB/1760kB) and IBM (720kB/1440 kB) block
        !           120:   encoding.
        !           121: * Amiga mouse.
        !           122: * Real-time clocks: A2000, A3000, A4000 builtin; DraCo builtin (r/o);
        !           123:   A2000-RTC-clone on some A1200 accelerator boards.
        !           124: 
        !           125: <div class="footnotes">
        !           126: <hr width="100" align="left">
        !           127: <div id="ftn.gvp-accelerator" class="footnote">
        !           128:       <p><a href="#gvp-accelerator" class="para"><sup class="para">[1] </sup></a>There has been a report that the GVP '030/50MHz accelerator only
        !           129:       works when all memory banks are switched to <span class="quote">&#8220;<span class="quote">Extended</span>&#8221;</span>
        !           130:       (J12?).</p>
        !           131:     </div>
        !           132: <div id="ftn.emplant-scsi" class="footnote">
        !           133:             <p><a href="#emplant-scsi" class="para"><sup class="para">[2] </sup></a>The Emplant SCSI adapter has been reported by a party to hang
        !           134:             after doing part of the installation without problems.
        !           135:             </p>
        !           136:           </div>
        !           137: <div id="ftn.voodoo-footnote" class="footnote">
        !           138:               <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with 
        !           139:              wscons and only if installed in a compatible PCI bridge. Voodoo 4
        !           140:              and Voodoo 5 boards might work but are untested. X server is not 
        !           141:              supported on Voodoo yet. Currently Voodoo needs initialization in
        !           142:              AmigaOS before starting the NetBSD (unless used with G-REX, which
        !           143:              does this on a firmware level).</p>
        !           144:             </div>
        !           145: <div id="ftn.cvppc-footnote" class="footnote">
        !           146:               <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only
        !           147:              with unaccelearted genfb driver. X server is not supported on 
        !           148:              these cards yet.</p>
        !           149:            </div>
        !           150: <div id="ftn.no-X-retina-a2410" class="footnote">
        !           151:               <p><a href="#no-X-retina-a2410" class="para"><sup class="para">[5] </sup></a>No X server for Retina Z2 and A2410, currently.</p>
        !           152:             </div>
        !           153: <div id="ftn.draco-zorro" class="footnote">
        !           154:             <p><a href="#draco-zorro" class="para"><sup class="para">[6] </sup></a>The DraCo Zorro-2 bus does not recognize a couple of boards
        !           155:             (known: Melody Z2, ITH ISDN Master II).  Worse: boards in
        !           156:             ConfigIn/ConfigOut order behind them won't be found, either. This
        !           157:             is not a NetBSD problem, but a design problem in the board (yes,
        !           158:             right).</p>
        !           159:           </div>
        !           160: <div id="ftn.pcmcia-ethernet" class="footnote">
        !           161:             <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to bugs in amiga-specific PCMCIA code only NE2000-compatible
        !           162:            cards are expected to work.</p>
        !           163:            </div>
        !           164: <div id="ftn.pci-ethernet" class="footnote">
        !           165:             <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a 
        !           166:            compatible PCI bridge.</p>
        !           167:            </div>
        !           168: <div id="ftn.scsi-scanners" class="footnote">
        !           169:             <p><a href="#scsi-scanners" class="simpara"><sup class="simpara">[9] </sup></a>There are reports that the Mustek and HP Scanjet scanners
        !           170:             hang if accessed from the A3000. This might apply to other
        !           171:             33C93-adapters, too.</p>
        !           172:           </div>
        !           173: </div>
        !           174: </div></div>
        !           175: 
        !           176: """
        !           177: ]]
        !           178: [[!tag tier2port]]

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb