Diff for /wikisrc/ports/amiga.mdwn between versions 1.9 and 1.28

version 1.9, 2014/10/06 21:41:28 version 1.28, 2020/03/13 12:02:08
Line 1 Line 1
 [[!template id=port  [[!template id=port
 port="amiga"  port="amiga"
 cur_rel="6.1.5"    cur_rel="9.0"
 future_rel="7.0"  future_rel="10.0"
 pkg_rel="6.0"  pkg_rel="8.0"
 changes_cur="6.0"  changes_cur="9.0"
 changes_future="7.0"  changes_future="10.0"
 thumbnail="http://www.netbsd.org/images/ports/amiga/header.gif"  thumbnail="//www.netbsd.org/images/ports/amiga/header.gif"
 about="""  about="""
 NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by  NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by
 Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by  Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by
Line 22  A4000/EC030, CDTV or CD32 out of the box Line 22  A4000/EC030, CDTV or CD32 out of the box
 to run NetBSD.  to run NetBSD.
   
 The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space  The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space
 needed is about 250 MB, depending on how much system components you install.  needed is about 250 MB, depending on how many system components you install.
 Check the install document for more details.   Check the install document for more details.
 """  """
 supported_hardware="""  supported_hardware="""
   
 * IDE controllers:  * IDE controllers:
   * A4000/A1200 builtin    * A4000/A1200 builtin
   * Buddha, Catweasel/Z2    * Buddha, Catweasel/Z2
   * ELBOX FastATA 1200 (Mk-III, Mk-IV) (6.0)    * ELBOX FastATA 1200 (Mk-III, Mk-IV)
   * Individual Computers ACA500 CF controller (current)    * Individual Computers ACA500 CF controller (current)
   * Individual Computers X-Surf IDE controller (current)    * Individual Computers X-Surf IDE controller (current)
   
Line 39  supported_hardware=""" Line 39  supported_hardware="""
     accellerator, GVP series II      accellerator, GVP series II
   * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync,    * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync,
     Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a>      Emplant <sup>[\[2\]](#ftn.emplant-scsi)</sup><a name="emplant-scsi"></a>
   * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+ (6.0), Magnum, Warp    * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+, Magnum, Warp
     Engine, Zeus, DraCo builtin SCSI      Engine, Zeus, DraCo builtin SCSI
   * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV,    * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV,
     Blizzard 2060, CyberSCSI Mk I and II      Blizzard 2060, CyberSCSI Mk I and II
Line 49  supported_hardware=""" Line 49  supported_hardware="""
   * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2,    * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2,
     Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX      Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX
     Mediator PCI 4000D, Mediator PCI 3000D, Mediator 4000Di, Mediator 3/4000T      Mediator PCI 4000D, Mediator PCI 3000D, Mediator 4000Di, Mediator 3/4000T
   * Phase5 PCI bridge: CyberVision PPC (6.0), BlizzardVision PPC (6.0), G-REX    * Phase5 PCI bridge: CyberVision PPC, BlizzardVision PPC, G-REX
     1200 (current), G-REX 4000 (current),      1200 (current), G-REX 4000 (current),
   * Prometheus PCI bridge (6.0)    * Prometheus PCI bridge
   
 * Clockports:  * Clockports:
   * Amiga 1200 on-board clockport (current)    * Amiga 1200 on-board clockport
   * Generic Zorro-based clockport (currently X-Surf only) (current)    * Generic Zorro-based clockport (currently X-Surf only)
   
 * Video controllers:  * Video controllers:
   * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a>    * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) <sup>[\[3\]](#ftn.voodoo-footnote)</sup><a name="voodoo-footnote"></a>
Line 64  supported_hardware=""" Line 64  supported_hardware="""
     Piccolo, Piccolo SD64      Piccolo, Piccolo SD64
   * CyberVision 64    * CyberVision 64
   * CyberVision 64/3D    * CyberVision 64/3D
   * CyberVision PPC, BlizzardVision PPC (6.0) <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a>    * CyberVision PPC, BlizzardVision PPC <sup>[\[4\]](#ftn.cvppc-footnote)</sup><a name="cvppc-footnote"></a>
   * ECS, AGA and A2024 built in on various Amigas    * ECS, AGA and A2024 built in on various Amigas
   * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>,    * Retina Z2 <sup>[\[5\]](#no-X-retina-a2410)</sup><a name="no-X-retina-a2410"></a>,
     Retina Z3, Altais      Retina Z3, Altais
Line 81  supported_hardware=""" Line 81  supported_hardware="""
   * AriadneII Ethernet    * AriadneII Ethernet
   * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC    * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC
   * Individual Computers X-Surf 100 (current)    * Individual Computers X-Surf 100 (current)
   * Some PCMCIA cards in the A1200 (tested with a few network cards only) <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a>    * PCMCIA cards in the A1200 <sup>[\[7\]](#ftn.pcmcia-ethernet)</sup><a name="pcmcia-ethernet"></a>
   * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> (6.0)    * NE2000-compatible PCI cards <sup>[\[8\]](#ftn.pci-ethernet)</sup><a name="pci-ethernet"></a> 
   
 * ARCnet controllers:  * ARCnet controllers:
   * A2060 ARCnet     * A2060 ARCnet
   
 * ISDN controllers:  * ISDN controllers:
   * BSC ISDN Master    * BSC ISDN Master
Line 96  supported_hardware=""" Line 96  supported_hardware="""
   * Individual Computers ISDN Surfer    * Individual Computers ISDN Surfer
   
 * Tape drives:  * Tape drives:
   * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150     * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150
   
 * Scanners: With the machine independent PINT interface integrated, these should  * Scanners: With the machine independent PINT interface integrated, these should
   work:    work:
Line 105  supported_hardware=""" Line 105  supported_hardware="""
   * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>    * Mustek SCSI scanner <sup>[\[9\]](#ftn.scsi-scanners)</sup><a name="scsi-scanners"></a>
   
 * CD-ROM drives:  * CD-ROM drives:
   * Most SCSI CD-ROM drives     * Most SCSI CD-ROM drives
   
 * Serial ports on these boards:  * Serial ports on these boards:
   * Amiga builtin    * Amiga builtin
Line 114  supported_hardware=""" Line 114  supported_hardware="""
   * MultiFaceCard II and III    * MultiFaceCard II and III
   * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport    * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport
     models!)      models!)
   * Individual Computers SilverSurfer (current)    * Individual Computers SilverSurfer
   
 * Parallel printer ports on these boards:  * Parallel printer ports on these boards:
   * Amiga builtin    * Amiga builtin
Line 139  supported_hardware=""" Line 139  supported_hardware="""
             </p>              </p>
           </div>            </div>
 <div id="ftn.voodoo-footnote" class="footnote">  <div id="ftn.voodoo-footnote" class="footnote">
               <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with                 <p><a href="#voodoo-footnote" class="para"><sup class="para">[3] </sup></a>3Dfx Voodoo 3 and Banshee cards are only supported with
               wscons and only if installed in a compatible PCI bridge. Voodoo 4                wscons and only if installed in a compatible PCI bridge. Voodoo 4
               and Voodoo 5 boards might work but are untested. X server is not                 and Voodoo 5 boards might work but are untested. X server is not
               supported on Voodoo yet. Currently Voodoo needs initialization in                supported on Voodoo yet. Currently Voodoo needs initialization in
               AmigaOS before starting the NetBSD (unless used with G-REX, which                AmigaOS before starting the NetBSD (unless used with G-REX, which
               does this on a firmware level).</p>                does this on a firmware level).</p>
             </div>              </div>
 <div id="ftn.cvppc-footnote" class="footnote">  <div id="ftn.cvppc-footnote" class="footnote">
               <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only                <p><a href="#cvppc-footnote" class="para"><sup class="para">[4] </sup></a>CVPPC/BVPPC cards are only supported with wscons and only
               with unaccelearted genfb driver. X server is not supported on                 with unaccelerated genfb driver. X server is not supported on
               these cards yet.</p>                these cards yet.</p>
             </div>              </div>
 <div id="ftn.no-X-retina-a2410" class="footnote">  <div id="ftn.no-X-retina-a2410" class="footnote">
Line 162  supported_hardware=""" Line 162  supported_hardware="""
             right).</p>              right).</p>
           </div>            </div>
 <div id="ftn.pcmcia-ethernet" class="footnote">  <div id="ftn.pcmcia-ethernet" class="footnote">
             <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to bugs in amiga-specific PCMCIA code only NE2000-compatible              <p><a href="#pcmcia-ethernet" class="para"><sup class="para">[7] </sup></a>Due to a bug in amiga-specific PCMCIA code only NE2000-compatible
             cards are expected to work.</p>              cards are expected to work on NetBSD-9.0/NetBSD-8.1 and earlier.</p>
             </div>              </div>
 <div id="ftn.pci-ethernet" class="footnote">  <div id="ftn.pci-ethernet" class="footnote">
             <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a               <p><a href="#pci-ethernet" class="para"><sup class="para">[8] </sup></a>PCI network cards are supported only when installed in a
             compatible PCI bridge.</p>              compatible PCI bridge.</p>
             </div>              </div>
 <div id="ftn.scsi-scanners" class="footnote">  <div id="ftn.scsi-scanners" class="footnote">

Removed from v.1.9  
changed lines
  Added in v.1.28


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb