--- wikisrc/ports/amiga.mdwn 2013/12/22 11:56:00 1.5 +++ wikisrc/ports/amiga.mdwn 2020/03/13 12:35:40 1.30 @@ -1,10 +1,11 @@ [[!template id=port port="amiga" -cur_rel="6.0" -future_rel="7.0" -changes_cur="6.0" -changes_future="7.0" -thumbnail="http://www.netbsd.org/images/ports/amiga/header.gif" +cur_rel="9.0" +future_rel="10.0" +pkg_rel="8.0" +changes_cur="9.0" +changes_future="10.0" +thumbnail="//www.netbsd.org/images/ports/amiga/header.gif" about=""" NetBSD/amiga is the port of NetBSD to the Amiga line of personal computers by Commodore and [Amiga International](http://www.amiga.com/) and to the DraCo by @@ -21,49 +22,49 @@ A4000/EC030, CDTV or CD32 out of the box to run NetBSD. The minimum RAM requirement is about 24 MB FASTMEM, the minimum hard disk space -needed is about 250 MB, depending on how much system components you install. -Check the install document for more details. +needed is about 250 MB, depending on how many system components you install. +Check the install document for more details. """ supported_hardware=""" * IDE controllers: * A4000/A1200 builtin * Buddha, Catweasel/Z2 - * ELBOX FastATA 1200 (Mk-III, Mk-IV) (6.0) - * Individual Computers ACA500 CF controller (current) - * Individual Computers X-Surf IDE controller (current) + * ELBOX FastATA 1200 (Mk-III, Mk-IV) + * Individual Computers ACA500 CF controller + * Individual Computers X-Surf IDE controller * SCSI host adapters: * 33c93 based boards: A2091, A3000 builtin, A3000 builtin modified for Apollo accellerator, GVP series II * 53c80 based boards: Hacker, 12 Gauge, IVS, Wordsync/Bytesync, Emplant [\[2\]](#ftn.emplant-scsi) - * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+ (6.0), Magnum, Warp + * 53c710 based boards: A4000T, A4091, BlizzardPPC 603e+, Magnum, Warp Engine, Zeus, DraCo builtin SCSI * FAS216 based SCSI boards: FastLane Z3, Blizzard I and II, Blizzard IV, Blizzard 2060, CyberSCSI Mk I and II * Cyberstorm Mk III / Cyberstorm PPC * PCI bridges: - * ELBOX Mediator PCI (current): Mediator PCI 1200, Mediator PCI 1200 LT2, + * ELBOX Mediator PCI: Mediator PCI 1200, Mediator PCI 1200 LT2, Mediator PCI 1200 LT4, Mediator PCI 1200 SX, Mediator PCI 1200 TX Mediator PCI 4000D, Mediator PCI 3000D, Mediator 4000Di, Mediator 3/4000T - * Phase5 PCI bridge: CyberVision PPC (6.0), BlizzardVision PPC (6.0), G-REX - 1200 (current), G-REX 4000 (current), - * Prometheus PCI bridge (6.0) + * Phase5 PCI bridge: CyberVision PPC, BlizzardVision PPC, G-REX + 1200, G-REX 4000 + * Prometheus PCI bridge * Clockports: - * Amiga 1200 on-board clockport (current) - * Generic Zorro-based clockport (currently X-Surf only) (current) + * Amiga 1200 on-board clockport + * Generic Zorro-based clockport (currently X-Surf only) * Video controllers: - * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee (current) [\[3\]](#ftn.voodoo-footnote) + * 3Dfx Voodoo 3, 3Dfx Voodoo Banshee [\[3\]](#ftn.voodoo-footnote) * A2410 [\[5\]](#ftn.no-X-retina-a2410) * Cirrus CL GD 54xx based boards: GVP Spectrum, Picasso II, II+ and IV, Piccolo, Piccolo SD64 * CyberVision 64 * CyberVision 64/3D - * CyberVision PPC, BlizzardVision PPC (6.0) [\[4\]](#ftn.cvppc-footnote) + * CyberVision PPC, BlizzardVision PPC [\[4\]](#ftn.cvppc-footnote) * ECS, AGA and A2024 built in on various Amigas * Retina Z2 [\[5\]](#no-X-retina-a2410), Retina Z3, Altais @@ -79,12 +80,12 @@ supported_hardware=""" * A2065, Hydra, ASDG LanRover, A4066, Ariadne, Quicknet Ethernet * AriadneII Ethernet * Individual Computers X-Surf / X-Surf 2 / X-Surf 3CC - * Individual Computers X-Surf 100 (current) - * Some PCMCIA cards in the A1200 (tested with a few network cards only) [\[7\]](#ftn.pcmcia-ethernet) - * NE2000-compatible PCI cards [\[8\]](#ftn.pci-ethernet) (6.0) + * Individual Computers X-Surf 100 + * PCMCIA cards in the A1200 [\[7\]](#ftn.pcmcia-ethernet) + * NE2000-compatible PCI cards [\[8\]](#ftn.pci-ethernet) * ARCnet controllers: - * A2060 ARCnet + * A2060 ARCnet * ISDN controllers: * BSC ISDN Master @@ -95,7 +96,7 @@ supported_hardware=""" * Individual Computers ISDN Surfer * Tape drives: - * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150 + * Most SCSI tape drives, including Archive Viper, Cipher SCSI-2 ST150 * Scanners: With the machine independent PINT interface integrated, these should work: @@ -104,7 +105,7 @@ supported_hardware=""" * Mustek SCSI scanner [\[9\]](#ftn.scsi-scanners) * CD-ROM drives: - * Most SCSI CD-ROM drives + * Most SCSI CD-ROM drives * Serial ports on these boards: * Amiga builtin @@ -113,7 +114,7 @@ supported_hardware=""" * MultiFaceCard II and III * HyperCom Z3 (serial only), HyperCom 4, 3+ and 4+ (not the A1200 clockport models!) - * Individual Computers SilverSurfer (current) + * Individual Computers SilverSurfer * Parallel printer ports on these boards: * Amiga builtin @@ -138,16 +139,16 @@ supported_hardware="""

-

[3] 3Dfx Voodoo 3 and Banshee cards are only supported with +

[3] 3Dfx Voodoo 3 and Banshee cards are only supported with wscons and only if installed in a compatible PCI bridge. Voodoo 4 - and Voodoo 5 boards might work but are untested. X server is not + and Voodoo 5 boards might work but are untested. X server is not supported on Voodoo yet. Currently Voodoo needs initialization in AmigaOS before starting the NetBSD (unless used with G-REX, which does this on a firmware level).

[4] CVPPC/BVPPC cards are only supported with wscons and only - with unaccelearted genfb driver. X server is not supported on + with unaccelerated genfb driver. X server is not supported on these cards yet.

@@ -161,11 +162,11 @@ supported_hardware=""" right).

-

[7] Due to bugs in amiga-specific PCMCIA code only NE2000-compatible - cards are expected to work.

+

[7] Due to a bug in amiga-specific PCMCIA code only NE2000-compatible + cards are expected to work on NetBSD-9.0/NetBSD-8.1 and earlier.

-

[8] PCI network cards are supported only when installed in a +

[8] PCI network cards are supported only when installed in a compatible PCI bridge.