--- wikisrc/ports/algor.mdwn	2017/03/15 08:29:15	1.13
+++ wikisrc/ports/algor.mdwn	2018/07/19 10:15:05	1.17
@@ -1,10 +1,10 @@
 [[!template id=port
 port="algor"
-cur_rel="7.1"
-future_rel="8.0"
+cur_rel="8.0"
+future_rel="9.0"
 pkg_rel="6.0"
-changes_cur="7.0"
-changes_future="8.0"
+changes_cur="8.0"
+changes_future="9.0"
 thumbnail="http://www.netbsd.org/images/ports/algor/alogo2.gif"
 no_install_notes="defined"
 about="""
@@ -20,7 +20,7 @@ the NetBSD kernel over the Centronics po
 network (in ELF format) using BOOTP/TFTP.
 
 Algorithmics boards can generally be run in big- or little-endian mode, although
-NetBSD/algor currently only supports little-endian. 
+NetBSD/algor currently only supports little-endian.
 """
 supported_hardware="""
 ###Supported System Models
@@ -49,34 +49,34 @@ unsupported_hardware="""
 ###Not Yet Supported
 
 * The PC keyboard controller on the P-4032. The interrupt handling code needs
-  some work in order to support this. 
+  some work in order to support this.
 * The Centronics port on the P-4032. This may, in fact, work, but the logic is
   apparently buggy, and the interrupts are wired up in a strange way. The device
-  is completely untested. 
+  is completely untested.
 * The floppy controller on the P-4032. The P-4032 floppy controller uses
   pseudo-DMA via a "DMA request" interrupt. Support for this function has not
-  yet been implemented. 
+  yet been implemented.
 * The PC keyboard controller on the P-5064. The interrupt handling code needs
-  some work in order to support this. 
+  some work in order to support this.
 * The Centronics port on the P-5064. This may, in fact, work, but the logic is
   apparently buggy, and the interrupts are wired up in a strange way. The device
-  is completely untested. 
+  is completely untested.
 * The on-board PCI IDE (part of the PIIX3 southbridge) on the P-5064. The PMON
   firmware does not configure the IDE controller, so NetBSD sees it as
   "disabled". Some code will have to be added to initialize the PCI IDE
-  controller before it can be used. 
+  controller before it can be used.
 * On-board USB on the PCI bus (part of the PIIX3 southbridge) on the P-5064.
   The uhci driver causes a bus error when it attempts to perform DMA, and the
-  system hangs. A bug report has been filed so that the issue can be tracked. 
+  system hangs. A bug report has been filed so that the issue can be tracked.
 * Devices plugged into the ISA slot on the P-5064. The interrupt handling code
-  needs some work in order to support this. 
+  needs some work in order to support this.
 * Devices plugged into the PCMCIA slots on the P-5064. The interrupt handling
-  code needs some work in order to support this. 
+  code needs some work in order to support this.
 * Algorithmic P-4000i -- this is a very old machine, with considerably different
   hardware than the newer Algorithmics boards. It is unlikely that NetBSD/algor
-  will ever support this machine. 
+  will ever support this machine.
 * Algorithmics P-6032 -- this is Algorithmics' latest board. Support for this
-  model is in-progress. 
+  model is in-progress.
 """
 ]]
 [[!tag tier2port]]