--- wikisrc/guide/raidframe.mdwn	2013/03/02 13:25:13	1.8
+++ wikisrc/guide/raidframe.mdwn	2013/03/03 23:06:46	1.9
@@ -162,8 +162,7 @@ the RAID and:
    be able to quickly reconfigure the system to boot from the remaining
    component (platform dependent).
 
-![RAID-1 Disk Logical Layout](/guide/images/raidframe_raidl1-diskdia.png)
-
+![RAID-1 Disk Logical Layout](/guide/images/raidframe_raidl1-diskdia.png)  
 **RAID-1 Disk Logical Layout**
 
 Because RAID-1 provides both redundancy and performance improvements, its most
@@ -191,29 +190,25 @@ has become the de facto standard for set
  1. Install a stock NetBSD onto Disk0 of your system.
 
 
-    ![Perform generic install onto Disk0/wd0](/guide/images/raidframe_r1r-pp1.png)
-
+    ![Perform generic install onto Disk0/wd0](/guide/images/raidframe_r1r-pp1.png)  
     **Perform generic install onto Disk0/wd0**
 
  2. Use the installed system on Disk0/wd0 to setup a RAID Set composed of
     Disk1/wd1 only.
 
-    ![Setup RAID Set](/guide/images/raidframe_r1r-pp2.png)
-
+    ![Setup RAID Set](/guide/images/raidframe_r1r-pp2.png)  
     **Setup RAID Set**
 
  3. Reboot the system off the Disk1/wd1 with the newly created RAID volume.
 
 
-    ![Reboot using Disk1/wd1 of RAID](/guide/images/raidframe_r1r-pp3.png)
-
+    ![Reboot using Disk1/wd1 of RAID](/guide/images/raidframe_r1r-pp3.png)  
     **Reboot using Disk1/wd1 of RAID**
 
 
  4. Add/re-sync Disk0/wd0 back into the RAID set.
 
-    ![Mirror Disk1/wd1 back to Disk0/wd0](/guide/images/raidframe_r1r-pp4.png)
-
+    ![Mirror Disk1/wd1 back to Disk0/wd0](/guide/images/raidframe_r1r-pp4.png)  
     **Mirror Disk1/wd1 back to Disk0/wd0**
 
 ### Hardware Review
@@ -936,8 +931,7 @@ priority to Disk1/wd1 before Disk0/wd0. 
 
 BIOS.
 
-![Award BIOS i386 Boot Disk1/wd1](/guide/images/raidframe_awardbios2.png)
-
+![Award BIOS i386 Boot Disk1/wd1](/guide/images/raidframe_awardbios2.png)  
 **Award BIOS i386 Boot Disk1/wd1**
 
 Save changes and exit:
@@ -953,8 +947,7 @@ You can determine that the BIOS is readi
 boot loader is 30 seconds instead of 15. After the reboot, re-enter the BIOS an
 configure the drive boot order back to the default:
 
-![Award BIOS i386 Boot Disk0/wd0](/guide/images/raidframe_awardbios1.png)
-
+![Award BIOS i386 Boot Disk0/wd0](/guide/images/raidframe_awardbios1.png)  
 **Award BIOS i386 Boot Disk0/wd0**
 
 Save changes and exit: