--- wikisrc/guide/raidframe.mdwn	2013/03/02 13:23:44	1.7
+++ wikisrc/guide/raidframe.mdwn	2013/03/02 13:25:13	1.8
@@ -163,6 +163,7 @@ the RAID and:
    component (platform dependent).
 
 ![RAID-1 Disk Logical Layout](/guide/images/raidframe_raidl1-diskdia.png)
+
 **RAID-1 Disk Logical Layout**
 
 Because RAID-1 provides both redundancy and performance improvements, its most
@@ -191,24 +192,28 @@ has become the de facto standard for set
 
 
     ![Perform generic install onto Disk0/wd0](/guide/images/raidframe_r1r-pp1.png)
+
     **Perform generic install onto Disk0/wd0**
 
  2. Use the installed system on Disk0/wd0 to setup a RAID Set composed of
     Disk1/wd1 only.
 
     ![Setup RAID Set](/guide/images/raidframe_r1r-pp2.png)
+
     **Setup RAID Set**
 
  3. Reboot the system off the Disk1/wd1 with the newly created RAID volume.
 
 
     ![Reboot using Disk1/wd1 of RAID](/guide/images/raidframe_r1r-pp3.png)
+
     **Reboot using Disk1/wd1 of RAID**
 
 
  4. Add/re-sync Disk0/wd0 back into the RAID set.
 
     ![Mirror Disk1/wd1 back to Disk0/wd0](/guide/images/raidframe_r1r-pp4.png)
+
     **Mirror Disk1/wd1 back to Disk0/wd0**
 
 ### Hardware Review
@@ -630,7 +635,7 @@ as `/dev/raid0b`.
 NetBSD Guide can expand on proper partitioning technique. See [Installing
 NetBSD: Preliminary considerations and preparations*](inst).
 
-*Note*: Note that 1 GB is 2\*1024\*1024=2097152 blocks (1 block is 512 bytes, or
+*Note*: 1 GB is 2\*1024\*1024=2097152 blocks (1 block is 512 bytes, or
 0.5 kilobytes). Despite what the underlying hardware composing a RAID set is,
 the RAID pseudo disk will always have 512 bytes/sector.
 
@@ -932,6 +937,7 @@ priority to Disk1/wd1 before Disk0/wd0. 
 BIOS.
 
 ![Award BIOS i386 Boot Disk1/wd1](/guide/images/raidframe_awardbios2.png)
+
 **Award BIOS i386 Boot Disk1/wd1**
 
 Save changes and exit:
@@ -948,6 +954,7 @@ boot loader is 30 seconds instead of 15.
 configure the drive boot order back to the default:
 
 ![Award BIOS i386 Boot Disk0/wd0](/guide/images/raidframe_awardbios1.png)
+
 **Award BIOS i386 Boot Disk0/wd0**
 
 Save changes and exit: