File:  [NetBSD Developer Wiki] / wikisrc / guide / net-practice.mdwn
Revision 1.2: download - view: text, annotated - select for diffs
Thu Mar 14 23:19:08 2013 UTC (8 years, 4 months ago) by jdf
Branches: MAIN
CVS tags: HEAD
Cosmetical issues.

    1: # Setting up TCP/IP on NetBSD in practice
    2: 
    3: ## A walk through the kernel configuration
    4: 
    5: Before we dive into configuring various aspects of network setup, we want to 
    6: walk through the necessary bits that have to or can be present in the kernel. 
    7: See [[Compiling the kernel|guide/kernel]] for more details on compiling the 
    8: kernel, we will concentrate on the configuration of the kernel here. We will 
    9: take the i386/GENERIC config file as an example here. Config files for other 
   10: platforms should contain similar information, the comments in the config files 
   11: give additional hints. Besides the information given here, each kernel option is 
   12: also documented in the 
   13: [options(4)](http://netbsd.gw.com/cgi-bin/man-cgi?options+4+NetBSD-5.0.1+i386) 
   14: manpage, and there is usually a manpage for each driver too, e.g. 
   15: [tlp(4)](http://netbsd.gw.com/cgi-bin/man-cgi?tlp+4+NetBSD-5.0.1+i386).
   16: 
   17: The first line of each config file shows the version. It can be used to compare 
   18: against other versions via CVS, or when reporting bugs.
   19: 
   20:     options         NTP             # NTP phase/frequency locked loop
   21: 
   22: If you want to run the Network Time Protocol (NTP), this option can be enabled 
   23: for maximum precision. If the option is not present, NTP will still work. See 
   24: [ntpd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?ntpd+8+NetBSD-5.0.1+i386) for 
   25: more information.
   26: 
   27:     file-system     NFS             # Network File System client
   28: 
   29: If you want to use another machine's hard disk via the Network File System 
   30: (NFS), this option is needed. The guide article about the
   31: [[Network File System|guide/net-services#nfs]] gives more information on NFS.
   32: 
   33:     options         NFSSERVER       # Network File System server
   34: 
   35: This option includes the server side of the NFS remote file sharing protocol. 
   36: Enable if you want to allow other machines to use your hard disk. The mentioned 
   37: article in the guide about [[NFS|guide/net-services#nfs]] contains more 
   38: information on NFS.
   39: 
   40:     #options        GATEWAY         # packet forwarding
   41: 
   42: If you want to setup a router that forwards packets between networks or network 
   43: interfaces, setting this option is needed. It doesn't only switch on packet 
   44: forwarding, but also increases some buffers. See 
   45: [options(4)](http://netbsd.gw.com/cgi-bin/man-cgi?options+4+NetBSD-5.0.1+i386) 
   46: for details.
   47: 
   48:     options         INET            # IP + ICMP + TCP + UDP
   49: 
   50: This enables the TCP/IP code in the kernel. Even if you don't want/use 
   51: networking, you will still need this for machine-internal communication of 
   52: subsystems like the X Window System. See 
   53: [inet(4)](http://netbsd.gw.com/cgi-bin/man-cgi?inet+4+NetBSD-5.0.1+i386) for 
   54: more details.
   55: 
   56:     options         INET6           # IPV6
   57: 
   58: If you want to use IPv6, this is your option. If you don't want IPv6, which is 
   59: part of NetBSD since the 1.5 release, you can remove/comment out that option. 
   60: See the 
   61: [inet6(4)](http://netbsd.gw.com/cgi-bin/man-cgi?inet6+4+NetBSD-5.0.1+i386) 
   62: manpage and [[Next generation Internet protocol - 
   63: IPv6|guide/net-intro#ipv6-intro]] for more information on the next generation 
   64: Internet protocol.
   65: 
   66:     #options        IPSEC           # IP security
   67: 
   68: Includes support for the IPsec protocol, including key and policy management, 
   69: authentication and compression. This option can be used without the previous 
   70: option INET6, if you just want to use IPsec with IPv4, which is possible. See 
   71: [ipsec(4)](http://netbsd.gw.com/cgi-bin/man-cgi?ipsec+4+NetBSD-5.0.1+i386) for 
   72: more information.
   73: 
   74:     #options        IPSEC_ESP       # IP security (encryption part; define w/IPSEC)
   75: 
   76: This option is needed in addition to IPSEC if encryption is wanted in IPsec.
   77: 
   78:     #options        MROUTING        # IP multicast routing
   79: 
   80: If multicast services like the MBone services should be routed, this option 
   81: needs to be included. Note that the routing itself is controlled by the 
   82: [mrouted(8)](http://netbsd.gw.com/cgi-bin/man-cgi?mrouted+8+NetBSD-5.0.1+i386) 
   83: daemon.
   84: 
   85:     options         ISO,TPIP        # OSI
   86:     #options        EON             # OSI tunneling over IP
   87: 
   88: These options include the OSI protocol stack, which was said for a long time to 
   89: be the future of networking. It's mostly history these days. :-) See the 
   90: [iso(4)](http://netbsd.gw.com/cgi-bin/man-cgi?iso+4+NetBSD-5.0.1+i386) manpage 
   91: for more information.
   92: 
   93:     options         NETATALK        # AppleTalk networking protocols
   94: 
   95: Include support for the AppleTalk protocol stack. Userland server programs are 
   96: needed to make use of that. See pkgsrc/net/netatalk and pkgsrc/net/netatalk-asun 
   97: for such packages. More information on the AppleTalk protocol and protocol stack 
   98: are available in the 
   99: [atalk(4)](http://netbsd.gw.com/cgi-bin/man-cgi?atalk+4+NetBSD-5.0.1+i386) 
  100: manpage.
  101: 
  102:     options         PPP_BSDCOMP     # BSD-Compress compression support for PPP
  103:     options         PPP_DEFLATE     # Deflate compression support for PPP
  104:     options         PPP_FILTER      # Active filter support for PPP (requires bpf)
  105: 
  106: These options tune various aspects of the Point-to-Point protocol. The first two 
  107: determine the compression algorithms used and available, while the third one 
  108: enables code to filter some packets.
  109: 
  110:     options         PFIL_HOOKS      # pfil(9) packet filter hooks
  111:     options         IPFILTER_LOG    # ipmon(8) log support
  112: 
  113: These options enable firewalling in NetBSD, using IPFilter. See the 
  114: [ipf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?ipf+4+NetBSD-5.0.1+i386) and 
  115: [ipf(8)](http://netbsd.gw.com/cgi-bin/man-cgi?ipf+8+NetBSD-5.0.1+i386) manpages 
  116: for more information on operation of IPFilter, and [[Configuring the 
  117: 	gateway/firewall|guide/net-practice#ipnat-configuring-gateway]] for a 
  118: 	configuration example.
  119: 
  120:     # Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
  121:     #options        TCP_COMPAT_42
  122: 
  123: This option is only needed if you have machines on the network that still run 
  124: 4.2BSD or a network stack derived from it. If you've got one or more 
  125: 4.2BSD-systems on your network, you've to pay attention to set the right 
  126: broadcast-address, as 4.2BSD has a bug in its networking code, concerning the 
  127: broadcast address. This bug forces you to set all host-bits in the 
  128: broadcast-address to `0`. The `TCP_COMPAT_42` option helps you ensuring this.
  129: 
  130:     options         NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
  131: 
  132: These options enable lookup of data via DHCP or the BOOTPARAM protocol if the 
  133: kernel is told to use a NFS root file system. See the 
  134: [diskless(8)](http://netbsd.gw.com/cgi-bin/man-cgi?diskless+8+NetBSD-5.0.1+i386) 
  135: manpage for more information.
  136: 
  137:     # Kernel root file system and dump configuration.
  138:     config          netbsd  root on ? type ?
  139:     #config         netbsd  root on sd0a type ffs
  140:     #config         netbsd  root on ? type nfs
  141: 
  142: These lines tell where the kernel looks for its root file system, and which 
  143: filesystem type it is expected to have. If you want to make a kernel that uses a 
  144: NFS root filesystem via the tlp0 interface, you can do this with
  145: 
  146:     root on tlp0 type       nfs
  147: 
  148: If a `?` is used instead of a device/type, the kernel tries to 
  149: figure one out on its own.
  150: 
  151:     # ISA serial interfaces
  152:     com0    at isa? port 0x3f8 irq 4        # Standard PC serial ports
  153:     com1    at isa? port 0x2f8 irq 3
  154:     com2    at isa? port 0x3e8 irq 5
  155: 
  156: If you want to use PPP or SLIP, you will need some serial (com) interfaces. 
  157: Others with attachment on USB, PCMCIA or PUC will do as well.
  158: 
  159:     # Network Interfaces
  160: 
  161: This rather long list contains all sorts of network drivers. Please pick the one 
  162: that matches your hardware, according to the comments. For most drivers, there's 
  163: also a manual page available, e.g. 
  164: [tlp(4)](http://netbsd.gw.com/cgi-bin/man-cgi?tlp+4+NetBSD-5.0.1+i386), 
  165: [ne(4)](http://netbsd.gw.com/cgi-bin/man-cgi?ne+4+NetBSD-5.0.1+i386), etc.
  166: 
  167:     # MII/PHY support
  168: 
  169: This section lists media independent interfaces for network cards. Pick one that 
  170: matches your hardware. If in doubt, enable them all and see what the kernel 
  171: picks. See the 
  172: [mii(4)](http://netbsd.gw.com/cgi-bin/man-cgi?mii+4+NetBSD-5.0.1+i386) manpage 
  173: for more information.
  174: 
  175:     # USB Ethernet adapters
  176:     aue*    at uhub? port ?         # ADMtek AN986 Pegasus based adapters
  177:     cue*    at uhub? port ?         # CATC USB-EL1201A based adapters
  178:     kue*    at uhub? port ?         # Kawasaki LSI KL5KUSB101B based adapters
  179: 
  180: USB-ethernet adapters only have about 2MBit/s bandwidth, but they are very 
  181: convenient to use. Of course this needs other USB related options which we won't 
  182: cover here, as well as the necessary hardware. See the corresponding manpages 
  183: for more information.
  184: 
  185:     # network pseudo-devices
  186:     pseudo-device   bpfilter        8       # Berkeley packet filter
  187: 
  188: This pseudo-device allows sniffing packets of all sorts. It's needed for 
  189: tcpdump, but also rarpd and some other applications that need to know about 
  190: network traffic. See 
  191: [bpf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?bpf+4+NetBSD-5.0.1+i386) for more 
  192: information.
  193: 
  194:     pseudo-device   ipfilter                # IP filter (firewall) and NAT
  195: 
  196: This one enables the IPFilter's packet filtering kernel interface used for 
  197: firewalling, NAT (IP Masquerading) etc. See 
  198: [ipf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?ipf+4+NetBSD-5.0.1+i386) and 
  199: [Configuring the gateway/firewall|guide/net-practice#ipnat-configuring-gateway]] 
  200: for more information.
  201: 
  202:     pseudo-device   loop                    # network loopback
  203: 
  204: This is the `lo0` software loopback network device which is used by some 
  205: programs these days, as well as for routing things. It should not be omitted. 
  206: See [lo(4)](http://netbsd.gw.com/cgi-bin/man-cgi?lo+4+NetBSD-5.0.1+i386) for 
  207: more details.
  208: 
  209:     pseudo-device   ppp             2       # Point-to-Point Protocol
  210: 
  211: If you want to use PPP either over a serial interface or ethernet (PPPoE), you 
  212: will need this option. See 
  213: [ppp(4)](http://netbsd.gw.com/cgi-bin/man-cgi?ppp+4+NetBSD-5.0.1+i386) for 
  214: details on this interface.
  215: 
  216:     pseudo-device   sl              2       # Serial Line IP
  217: 
  218: Serial Line IP is a simple encapsulation for IP over (well :) serial lines. It 
  219: does not include negotiation of IP addresses and other options, which is the 
  220: reason that it's not in widespread use today any more. See 
  221: [sl(4)](http://netbsd.gw.com/cgi-bin/man-cgi?sl+4+NetBSD-5.0.1+i386).
  222: 
  223:     pseudo-device   strip           2       # Starmode Radio IP (Metricom)
  224: 
  225: If you happen to have one of the old Metricom Ricochet packet radio wireless 
  226: network devices, use this pseudo-device to use it. See the 
  227: [strip(4)](http://netbsd.gw.com/cgi-bin/man-cgi?strip+4+NetBSD-5.0.1+i386) 
  228: manpage for detailed information.
  229: 
  230:     pseudo-device   tun             2       # network tunneling over tty
  231: 
  232: This network device can be used to tunnel network packets to a device file, 
  233: `/dev/tun*`. Packets routed to the tun0 interface can be read from `/dev/tun0`, 
  234: and data written to `/dev/tun0` will be sent out the tun0 network interface. 
  235: This can be used to implement e.g. QoS routing in userland. See 
  236: [tun(4)](http://netbsd.gw.com/cgi-bin/man-cgi?tun+4+NetBSD-5.0.1+i386) for 
  237: details.
  238: 
  239:     pseudo-device   gre             2       # generic L3 over IP tunnel
  240: 
  241: The GRE encapsulation can be used to tunnel arbitrary layer 3 packets over IP, 
  242: e.g. to implement VPNs. See 
  243: [gre(4)](http://netbsd.gw.com/cgi-bin/man-cgi?gre+4+NetBSD-5.0.1+i386) for more.
  244: 
  245:     pseudo-device   gif             4       # IPv[46] over IPv[46] tunnel (RFC 1933)
  246: 
  247: Using the GIF interface allows to tunnel e.g. IPv6 over IPv4, which can be used 
  248: to get IPv6 connectivity if no IPv6-capable uplink (ISP) is available. Other 
  249: mixes of operations are possible, too. See the 
  250: [gif(4)](http://netbsd.gw.com/cgi-bin/man-cgi?gif+4+NetBSD-5.0.1+i386) manpage 
  251: for some examples.
  252: 
  253:     #pseudo-device  faith           1       # IPv[46] tcp relay translation i/f
  254: 
  255: The faith interface captures IPv6 TCP traffic, for implementing userland 
  256: IPv6-to-IPv4 TCP relays e.g. for protocol transitions. See the 
  257: [faith(4)](http://netbsd.gw.com/cgi-bin/man-cgi?faith+4+NetBSD-5.0.1+i386) 
  258: manpage for more details on this device.
  259: 
  260:     #pseudo-device  stf             1       # 6to4 IPv6 over IPv4 encapsulation
  261: 
  262: This adds a network device that can be used to tunnel IPv6 over IPv4 without 
  263: setting up a configured tunnel before. The source address of outgoing packets 
  264: contains the IPv4 address, which allows routing replies back via IPv4. See the 
  265: [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) manpage 
  266: and [IPv6 Connectivity & Transition via 6to4|guide/net-practice#ipv6-6to4]] for 
  267: more details.
  268: 
  269:     pseudo-device   vlan                    # IEEE 802.1q encapsulation
  270: 
  271: This interface provides support for IEEE 802.1Q Virtual LANs, which allows 
  272: tagging Ethernet frames with a `vlan` ID. Using properly configured switches 
  273: (that also have to support VLAN, of course), this can be used to build virtual 
  274: LANs where one set of machines doesn't see traffic from the other (broadcast and 
  275: other). The 
  276: [vlan(4)](http://netbsd.gw.com/cgi-bin/man-cgi?vlan+4+NetBSD-5.0.1+i386) manpage 
  277: tells more about this.
  278: 
  279: ## Overview of the network configuration files
  280: 
  281: The following is a list of the files used to configure the network. The usage of 
  282: these files, some of which have already been met the first chapters, will be 
  283: described in the following sections.
  284: 
  285:  * `/etc/hosts` -- Local hosts database file. Each line contains information 
  286:    regarding a known host and contains the internet address, the host's name and 
  287:    the aliases. Small networks can be configured using only the hosts file, 
  288:    without a *name server*.
  289: 
  290:  * `/etc/resolv.conf` -- This file specifies how the routines which provide 
  291:    access to the Internet Domain Name System should operate. Generally it 
  292:    contains the addresses of the name servers.
  293: 
  294:  * `/etc/ifconfig.xxx` -- This file is used for the automatic configuration of 
  295:    the network card at boot.
  296: 
  297:  * `/etc/mygate` -- Contains the IP address of the gateway.
  298: 
  299:  * `/etc/nsswitch.conf` -- Name service switch configuration file. It controls 
  300:    how a process looks up various databases containing information regarding 
  301:    hosts, users, groups, etc. Specifically, this file defines the order to look 
  302:    up the databases. For example, the line:
  303: 
  304:        hosts:    files dns
  305: 
  306:    specifies that the hosts database comes from two sources, *files* (the local 
  307:    `/etc/hosts` file) and *DNS*, (the Internet Domain Name System) and that the 
  308:    local files are searched before the DNS.
  309: 
  310:    It is usually not necessary to modify this file.
  311: 
  312: ## Connecting to the Internet with a modem
  313: 
  314: There are many types of Internet connections: this section explains how to 
  315: connect to a provider using a modem over a telephone line using the PPP 
  316: protocol, a very common setup. In order to have a working connection, the 
  317: following steps must be done:
  318: 
  319:  1. Get the necessary information from the provider.
  320:  2. Edit the file `/etc/resolv.conf` and check `/etc/nsswitch.conf`.
  321:  3. Create the directories `/etc/ppp` and `/etc/ppp/peers` if they don't exist.
  322:  4. Create the connection script, the chat file and the pppd options file.
  323:  5. Created the user-password authentication file.
  324: 
  325: Judging from the previous list it looks like a complicated procedure that 
  326: requires a lot of work. Actually, the single steps are very easy: it's just a 
  327: matter of modifying, creating or simply checking some small text files. In the 
  328: following example it will be assumed that the modem is connected to the second 
  329: serial port `/dev/tty01` (COM2 in DOS).
  330: 
  331: A few words on the difference between `com`, `COM` and `tty`. For NetBSD, `com` 
  332: is the name of the serial port driver (the one that is displayed by `dmesg`) and 
  333: `tty` is the name of the port. Since numbering starts at 0, `com0` is the driver 
  334: for the first serial port, named `tty00`. In the DOS world, instead, `COM1` 
  335: refers to the first serial port (usually located at 0x3f8), `COM2` to the 
  336: second, and so on. Therefore `COM1` (DOS) corresponds to `/dev/tty00` (NetBSD).
  337: 
  338: Besides external modems connected to COM ports (using `/dev/tty0[012]` on i386, 
  339: `/dev/tty[ab]` on sparc, ...) modems on USB (`/dev/ttyU*`) and pcmcia/cardbus 
  340: (`/dev/tty0[012]`) can be used.
  341: 
  342: ### Getting the connection information
  343: 
  344: The first thing to do is ask the provider the necessary information for the 
  345: connection, which means:
  346: 
  347:  * The phone number of the nearest POP.
  348:  * The authentication method to be used.
  349:  * The username and password for the connection.
  350:  * The IP addresses of the name servers.
  351: 
  352: ### resolv.conf and nsswitch.conf
  353: 
  354: The `/etc/resolv.conf` file must be configured using the information supplied by 
  355: the provider, especially the addresses of the DNS. In this example the two DNS 
  356: will be `194.109.123.2` and `191.200.4.52`:
  357: 
  358:     nameserver 194.109.123.2
  359:     nameserver 191.200.4.52
  360: 
  361: And now an example of the `/etc/nsswitch.conf` file:
  362: 
  363:     # /etc/nsswitch.conf
  364:     group:         compat
  365:     group_compat:  nis
  366:     hosts:         files dns
  367:     netgroup:      files [notfound=return] nis
  368:     networks:      files
  369:     passwd:        compat
  370:     passwd_compat: nis
  371:     shells:        files
  372: 
  373: The defaults of doing hostname lookups via `/etc/hosts` followed by the DNS 
  374: works fine and there's usually no need to modify this.
  375: 
  376: ### Creating the directories for pppd
  377: 
  378: The directories `/etc/ppp` and `/etc/ppp/peers` will contain the configuration 
  379: files for the PPP connection. After a fresh install of NetBSD they don't exist 
  380: and must be created (chmod 700).
  381: 
  382:     # mkdir /etc/ppp
  383:     # mkdir /etc/ppp/peers 
  384: 
  385: ### Connection script and chat file
  386: 
  387: The connection script will be used as a parameter on the pppd command line; it 
  388: is located in `/etc/ppp/peers` and has usually the name of the provider. For 
  389: example, if the provider's name is BigNet and your user name for the connection 
  390: to the provider is alan, an example connection script could be:
  391: 
  392:     # /etc/ppp/peers/bignet
  393:     connect '/usr/sbin/chat -v -f /etc/ppp/peers/bignet.chat'
  394:     noauth
  395:     user alan
  396:     remotename bignet.it
  397: 
  398: In the previous example, the script specifies a *chat file* to be used for the 
  399: connection. The options in the script are detailed in the 
  400: [pppd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?pppd+8+NetBSD-5.0.1+i386) man 
  401: page.
  402: 
  403: ### Note
  404: 
  405: If you are experiencing connection problems, add the following two lines to the 
  406: connection script
  407: 
  408:     debug
  409:     kdebug 4
  410: 
  411: You will get a log of the operations performed when the system tries to connect. 
  412: See [pppd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?pppd+8+NetBSD-5.0.1+i386), 
  413: [syslog.conf(5)](http://netbsd.gw.com/cgi-bin/man-cgi?syslog.conf+5+NetBSD-5.0.1+i386).
  414: 
  415: The connection script calls the chat application to deal with the physical 
  416: connection (modem initialization, dialing, ...) The parameters to chat can be 
  417: specified inline in the connection script, but it is better to put them in a 
  418: separate file. If, for example, the telephone number of the POP to call is
  419: `02 99999999`, an example chat script could be:
  420: 
  421:     # /etc/ppp/peers/bignet.chat
  422:     ABORT BUSY
  423:     ABORT "NO CARRIER"
  424:     ABORT "NO DIALTONE"
  425:     '' ATDT0299999999
  426:     CONNECT ''
  427: 
  428: *Note*: If you have problems with the chat file, you can try connecting manually 
  429: to the POP with the 
  430: [cu(1)](http://netbsd.gw.com/cgi-bin/man-cgi?cu+1+NetBSD-5.0.1+i386) program and 
  431: verify the exact strings that you are receiving.
  432: 
  433: ### Authentication
  434: 
  435: During authentication each of the two systems verifies the identity of the other 
  436: system, although in practice you are not supposed to authenticate the provider, 
  437: but only to be verified by him, using one of the following methods:
  438: 
  439:  * PAP/CHAP
  440:  * login
  441: 
  442: Most providers use a PAP/CHAP authentication.
  443: 
  444: #### PAP/CHAP authentication
  445: 
  446: The authentication information (speak: password) is stored in the 
  447: `/etc/ppp/pap-secrets` for PAP and in `/etc/ppp/chap-secrets` for CHAP. The 
  448: lines have the following format:
  449: 
  450:     user * password
  451: 
  452: For example:
  453: 
  454:     alan * pZY9o
  455: 
  456: For security reasons the `pap-secrets` and `chap-secrets` files should be owned 
  457: by root and have permissions 600.
  458: 
  459:     # chown root /etc/ppp/pap-secrets
  460:     # chown root /etc/ppp/chap-secrets
  461:     # chmod 600 /etc/ppp/pap-secrets
  462:     # chmod 600 /etc/ppp/chap-secrets
  463: 
  464: #### Login authentication
  465: 
  466: This type of authentication is not widely used today; if the provider uses login 
  467: authentication, user name and password must be supplied in the chat file instead 
  468: of the PAP/CHAP files, because the chat file simulates an interactive login. In 
  469: this case, set up appropriate permissions for the chat file.
  470: 
  471: The following is an example chat file with login authentication:
  472: 
  473:     # /etc/ppp/peers/bignet.chat
  474:     ABORT BUSY
  475:     ABORT "NO CARRIER"
  476:     ABORT "NO DIALTONE"
  477:     '' ATDT0299999999
  478:     CONNECT ''
  479:     TIMEOUT 50
  480:     ogin: alan
  481:     ssword: pZY9o
  482: 
  483: ### pppd options
  484: 
  485: The only thing left to do is the creation of the pppd options file, which is 
  486: `/etc/ppp/options` (chmod 644):
  487: 
  488:     /dev/tty01
  489:     lock
  490:     crtscts
  491:     57600
  492:     modem
  493:     defaultroute
  494:     noipdefault
  495: 
  496: Check the 
  497: [pppd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?pppd+8+NetBSD-5.0.1+i386) man 
  498: page for the meaning of the options.
  499: 
  500: ### Testing the modem
  501: 
  502: Before activating the link it is a good idea to make a quick modem test, in 
  503: order to verify that the physical connection and the communication with the 
  504: modem works. For the test the 
  505: [cu(1)](http://netbsd.gw.com/cgi-bin/man-cgi?cu+1+NetBSD-5.0.1+i386) program can 
  506: be used, as in the following example.
  507: 
  508:  1. Create the file `/etc/uucp/port` with the following lines:
  509: 
  510:         type modem
  511:         port modem
  512:         device /dev/tty01
  513:         speed 115200
  514: 
  515:     (substitute the correct device in place of `/dev/tty01`).
  516: 
  517:  2. Write the command `cu -p modem` to start sending commands to the modem. For 
  518:     example:
  519: 
  520:         # cu -p modem
  521:         Connected.
  522:         ATZ
  523:         OK
  524:         ~.
  525:         
  526:         Disconnected.
  527:         #
  528: 
  529: 	In the previous example the reset command (ATZ) was sent to the modem, which 
  530: 	replied with OK: the communication works. To exit 
  531: 	[cu(1)](http://netbsd.gw.com/cgi-bin/man-cgi?cu+1+NetBSD-5.0.1+i386), write 
  532: 	`~` (tilde) followed by `.` (dot), as in the example.
  533: 
  534: If the modem doesn't work, check that it is connected to the correct port (i.e. 
  535: you are using the right port with 
  536: [cu(1)](http://netbsd.gw.com/cgi-bin/man-cgi?cu+1+NetBSD-5.0.1+i386). Cables are 
  537: a frequent cause of trouble, too.
  538: 
  539: When you start 
  540: [cu(1)](http://netbsd.gw.com/cgi-bin/man-cgi?cu+1+NetBSD-5.0.1+i386) and a 
  541: message saying `Permission denied` appears, check who is the owner of the 
  542: `/dev/tty##` device, it must be "uucp". For example:
  543: 
  544:     $ ls -l /dev/tty00
  545:     crw-------  1 uucp  wheel  8, 0 Mar 22 20:39 /dev/tty00
  546: 
  547: If the owner is root, the following happens:
  548: 
  549:     $ ls -l /dev/tty00
  550:     crw-------  1 root  wheel  8, 0 Mar 22 20:39 /dev/tty00
  551:     $ cu -p modem
  552:     cu: open (/dev/tty00): Permission denied
  553:     cu: All matching ports in use
  554: 
  555: ### Activating the link
  556: 
  557: At last everything is ready to connect to the provider with the following 
  558: command:
  559: 
  560:     # pppd call bignet
  561: 
  562: where `bignet` is the name of the already described connection script. To see 
  563: the connection messages of pppd, give the following command:
  564: 
  565:     # tail -f /var/log/messages
  566: 
  567: To disconnect, do a `kill -HUP` of `pppd`.
  568: 
  569:      # pkill -HUP pppd 
  570: 
  571: ### Using a script for connection and disconnection
  572: 
  573: When the connection works correctly, it's time to write a couple of scripts to 
  574: avoid repeating the commands every time. These two scripts can be named, for 
  575: example, `ppp-start` and `ppp-stop`.
  576: 
  577: `ppp-start` is used to connect to the provider:
  578: 
  579:     #!/bin/sh
  580:     MODEM=tty01
  581:     POP=bignet
  582:     if [ -f /var/spool/lock/LCK..$MODEM ]; then
  583:     echo ppp is already running...
  584:     else
  585:     pppd call $POP
  586:     tail -f /var/log/messages
  587:     fi
  588: 
  589: `ppp-stop` is used to close the connection:
  590: 
  591:     #!/bin/sh
  592:     MODEM=tty01
  593:     if [ -f /var/spool/lock/LCK..$MODEM ]; then
  594:     echo -f killing pppd...
  595:     kill -HUP `cat /var/spool/lock/LCK..$MODEM`
  596:     echo done
  597:     else
  598:     echo ppp is not active
  599:     fi
  600: 
  601: The two scripts take advantage of the fact that when pppd is active, it creates 
  602: the file `LCK..tty01` in the `/var/spool/lock` directory. This file contains the 
  603: process ID (*pid*) of the pppd process.
  604: 
  605: The two scripts must be executable:
  606: 
  607:     # chmod u+x ppp-start ppp-stop
  608: 
  609: ### Running commands after dialin
  610: 
  611: If you find yourself to always run the same set of commands each time you dial 
  612: in, you can put them in a script `/etc/ppp/ip-up` which will be called by 
  613: [pppd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?pppd+8+NetBSD-5.0.1+i386) after 
  614: successful dial-in. Likewise, before the connection is closed down, 
  615: `/etc/ppp/ip-down` is executed. Both scripts are expected to be executable. See 
  616: [pppd(8)](http://netbsd.gw.com/cgi-bin/man-cgi?pppd+8+NetBSD-5.0.1+i386) for 
  617: more details.
  618: 
  619: ## Creating a small home network
  620: 
  621: Networking is one of the main strengths of Unix and NetBSD is no exception: 
  622: networking is both powerful and easy to set up and inexpensive too, because 
  623: there is no need to buy additional software to communicate or to build a server. 
  624: [[Setting up an Internet gateway with IPNAT|guide/net-practice#ipnat]] explains 
  625: how to configure a NetBSD machine to act as a gateway for a network: with IPNAT 
  626: all the hosts of the network can reach the Internet with a single connection to 
  627: a provider made by the gateway machine. The only thing to be checked before 
  628: creating the network is to buy network cards supported by NetBSD (check the 
  629: `INSTALL.*` files for a list of supported devices).
  630: 
  631: First, the network cards must be installed and connected to a hub, switch or 
  632: directly (see the next image for an example configuration).
  633: 
  634: Next, check that the network cards are recognized by the kernel, studying the 
  635: output of the `dmesg` command. In the following example the kernel recognized 
  636: correctly an NE2000 clone:
  637: 
  638:     ...
  639:     ne0 at isa0 port 0x280-0x29f irq 9
  640:     ne0: NE2000 Ethernet
  641:     ne0: Ethernet address 00:c2:dd:c1:d1:21
  642:     ...
  643: 
  644: If the card is not recognized by the kernel, check that it is enabled in the 
  645: kernel configuration file and then that the card's IRQ matches the one that the 
  646: kernel expects. For example, this is the isa NE2000 line in the configuration 
  647: file; the kernel expects the card to be at IRQ 9.
  648: 
  649:     ...
  650:     ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
  651:     ...
  652: 
  653: If the card's configuration is different, it will probably not be found at boot. 
  654: In this case, either change the line in the kernel configuration file and 
  655: compile a new kernel or change the card's setup (usually through a setup disk 
  656: or, for old cards, a jumper on the card).
  657: 
  658: The following command shows the network card's current configuration:
  659: 
  660:     # ifconfig ne0
  661:     ne0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
  662:     address: 00:50:ba:aa:a7:7f
  663:     media: Ethernet autoselect (10baseT)
  664:     inet6 fe80::250:baff:feaa:a77f%ne0 prefixlen 64 scopeid 0x1 
  665: 
  666: The software configuration of the network card is very easy. The IP address 
  667: 192.168.1.1 is assigned to the card.
  668: 
  669:     # ifconfig ne0 inet 192.168.1.1 netmask 0xffffff00
  670: 
  671: Note that the networks 10.0.0.0/8 and 192.168.0.0/16 are reserved for private 
  672: networks, which is what we're setting up here.
  673: 
  674: Repeating the previous command now gives a different result:
  675: 
  676:     # ifconfig ne0
  677:     ne0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
  678:     address: 00:50:ba:aa:a7:7f
  679:     media: Ethernet autoselect (10baseT)
  680:     inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
  681:     inet6 fe80::250:baff:feaa:a77f%ne0 prefixlen 64 scopeid 0x1 
  682: 
  683: The output of `ifconfig` has now changed: the IP address is now printed and 
  684: there are two new flags, `UP` and `RUNNING` If the interface isn't `UP`, it will 
  685: not be used by the system to send packets.
  686: 
  687: The host was given the IP address 192.168.1.1, which belongs to the set of 
  688: addresses reserved for internal networks which are not reachable from the 
  689: Internet. The configuration is finished and must now be tested; if there is 
  690: another active host on the network, a `ping` can be tried. For example, if 
  691: 192.168.1.2 is the address of the active host:
  692: 
  693:     # ping 192.168.1.2
  694:     PING ape (192.168.1.2): 56 data bytes
  695:     64 bytes from 192.168.1.2: icmp_seq=0 ttl=255 time=1.286 ms
  696:     64 bytes from 192.168.1.2: icmp_seq=1 ttl=255 time=0.649 ms
  697:     64 bytes from 192.168.1.2: icmp_seq=2 ttl=255 time=0.681 ms
  698:     64 bytes from 192.168.1.2: icmp_seq=3 ttl=255 time=0.656 ms
  699:     ^C
  700:     ----ape PING Statistics----
  701:     4 packets transmitted, 4 packets received, 0.0% packet loss
  702:     round-trip min/avg/max/stddev = 0.649/0.818/1.286/0.312 ms
  703: 
  704: With the current setup, at the next boot it will be necessary to repeat the 
  705: configuration of the network card. In order to avoid repeating the card's 
  706: configuration at each boot, add the following lines to `/etc/rc.conf`:
  707: 
  708:     auto_ifconfig=yes
  709:     ifconfig_ne0="inet 192.168.1.1 netmask 0xffffff00" 
  710: 
  711: In this example the variable `ifconfig_ne0` was set because the network card was 
  712: recognized as *ne0* by the kernel; if you are using a different adapter, 
  713: substitute the appropriate name in place of ne0.
  714: 
  715: At the next boot the network card will be configured automatically.
  716: 
  717: If you have a router that is connected to the internet, you can use it as 
  718: default router, which will handle all your packets. To do so, set `defaultroute` 
  719: to the router's IP address in `/etc/rc.conf`:
  720: 
  721:     defaultroute=192.168.0.254
  722: 
  723: Be sure to use the default router's IP address instead of name, in case your DNS 
  724: server is beyond the default router. In that case, the DNS server couldn't be 
  725: reached to resolve the default router's hostname and vice versa, creating a 
  726: chicken-and-egg problem.
  727: 
  728: To reach hosts on your local network, and assuming you really have very few 
  729: hosts, adjust `/etc/hosts` to contain the addresses of all the hosts belonging 
  730: to the internal network. For example:
  731: 
  732:     #
  733:     # Host Database
  734:     # This file should contain the addresses and aliases
  735:     # for local hosts that share this file.
  736:     # It is used only for "ifconfig" and other operations
  737:     # before the nameserver is started.
  738:     #
  739:     #
  740:     127.0.0.1             localhost
  741:     ::1                   localhost
  742:     #
  743:     # RFC 1918 specifies that these networks are "internal".
  744:     # 10.0.0.0    10.255.255.255
  745:     # 172.16.0.0  172.31.255.255
  746:     # 192.168.0.0 192.168.255.255
  747:     
  748:     192.168.1.1   ape.insetti.net ape
  749:     192.168.1.2   vespa.insetti.net vespa
  750:     192.168.1.0   insetti.net
  751: 
  752: If you are dialed in via an Internet Service Provider, or if you have a local 
  753: Domain Name Server (DNS) running, you may want to use it to resolve hostnames to 
  754: IP addresses, possibly in addition to `/etc/hosts`, which would only know your 
  755: own hosts. To configure a machine as DNS client, you need to edit 
  756: `/etc/resolv.conf`, and enter the DNS server's address, in addition to an 
  757: optional domain name that will be appended to hosts with no domain, in order to 
  758: create a FQDN for resolving. Assuming your DNS server's IP address is 
  759: 192.168.1.2 and it is setup to serve for "home.net", put the following into 
  760: `/etc/resolv.conf`:
  761: 
  762:     # /etc/resolv.conf
  763:     domain home.net
  764:     nameserver 192.168.1.2
  765: 
  766: The `/etc/nsswitch.conf` file should be checked as explained in the previous 
  767: [[nsswitch.conf example|guide/net-practice#rc.conf_and_nsswitch.conf]].
  768: 
  769: Summing up, to configure the network the following must be done: the network 
  770: adapters must be installed and physically connected. Next they must be 
  771: configured (with `ifconfig`) and, finally, the file `/etc/rc.conf` must be 
  772: modified to configure the interface and possibly default router, and 
  773: `/etc/resolv.conf` and `/etc/nsswitch.conf` should be adjusted if DNS should be 
  774: used. This type of network management is sufficient for small networks without 
  775: sophisticated needs.
  776: 
  777: ## Setting up an Internet gateway with IPNAT
  778: 
  779: The mysterious acronym IPNAT hides the Internet Protocol Network Address 
  780: Translation, which enables the routing of an internal network (e.g. your home 
  781: network as described in the previous section) on a real network (Internet). This 
  782: means that with only one *real* IP, static or dynamic, belonging to a gateway 
  783: running IPNAT, it is possible to create simultaneous connections to the Internet 
  784: for all the hosts of the internal network.
  785: 
  786: Some usage examples of IPNAT can be found in the subdirectory 
  787: `/usr/share/examples/ipf`: look at the files `BASIC.NAT` and `nat-setup`.
  788: 
  789: The setup for the example described in this section is detailed in the following 
  790: figure: *host 1* can connect to the Internet calling a provider with a modem and 
  791: getting a dynamic IP address. *host 2* and *host 3* can't communicate with the 
  792: Internet with a normal setup: IPNAT allows them to do it: host 1 will act as a 
  793: Internet gateway for hosts 2 and 3. Using host 1 as default router, hosts 2 and 
  794: 3 will be able to access the Internet.
  795: 
  796: ![Network with gateway](/guide/images/net1.gif)  
  797: **Network with gateway**
  798: 
  799: ### Configuring the gateway/firewall
  800: 
  801: To use IPNAT, the *pseudo-device ipfilter* must be compiled into the kernel, and 
  802: IP packet forwarding must be enabled in the kernel. To check, run:
  803: 
  804:     # sysctl net.inet.ip.forwarding
  805:     net.inet.ip.forwarding = 1
  806: 
  807: If the result is `1` as in the previous example, the option is enabled, 
  808: otherwise, if the result is `0` the option is disabled. You can do two things:
  809: 
  810:  1. Compile a new kernel, with the GATEWAY option enabled.
  811: 
  812:  2. Enable the option in the current kernel with the following command:
  813: 
  814:         # sysctl -w net.inet.ip.forwarding=1
  815: 
  816: 	You can add sysctl settings to `/etc/sysctl.conf` to have them set 
  817: 	automatically at boot. In this case you would want to add
  818: 
  819:         net.inet.ip.forwarding=1
  820: 
  821: 
  822: The rest of this section explains how to create an IPNAT configuration that is 
  823: automatically started every time that a connection to the provider is activated 
  824: with the PPP link. With this configuration all the host of a home network (for 
  825: example) will be able to connect to the Internet through the gateway machine, 
  826: even if they don't use NetBSD.
  827: 
  828: For the setup, first, create the `/etc/ipnat.conf` file containing the following 
  829: rules:
  830: 
  831:     map ppp0 192.168.1.0/24 -> 0/32 proxy port ftp ftp/tcp
  832:     map ppp0 192.168.1.0/24 -> 0/32 portmap tcp/udp 40000:60000
  833:     map ppp0 192.168.1.0/24 -> 0/32
  834: 
  835: 192.168.1.0/24 are the network addresses that should be mapped. The first line 
  836: of the configuration file is optional: it enables active FTP to work through the 
  837: gateway. The second line is used to handle correctly tcp and udp packets; the 
  838: portmapping is necessary because of the many to one relationship). The third 
  839: line is used to enable ICMP, ping, etc.
  840: 
  841: Next, create the `/etc/ppp/ip-up` file; it will be called automatically every 
  842: time that the PPP link is activated:
  843: 
  844:     #!/bin/sh
  845:     # /etc/ppp/ip-up
  846:     /etc/rc.d/ipnat forcestart
  847: 
  848: Create the file `/etc/ppp/ip-down`; it will be called automatically when the PPP 
  849: link is closed:
  850: 
  851:     #!/bin/sh
  852:     # /etc/ppp/ip-down
  853:     /etc/rc.d/ipnat forcestop
  854: 
  855: Both `ip-up` and `ip-down` must be executable:
  856: 
  857:     # chmod u+x ip-up ip-down
  858: 
  859: The gateway machine is now ready.
  860: 
  861: ### Configuring the clients
  862: 
  863: Create a `/etc/resolv.conf` file like the one on the gateway machine, to make 
  864: the clients access the same DNS server as the gateway.
  865: 
  866: Next, make all clients use the gateway as their default router. Use the 
  867: following command:
  868: 
  869:     # route add default 192.168.1.1
  870: 
  871: 192.168.1.1 is the address of the gateway machine configured in the previous 
  872: section.
  873: 
  874: Of course you don't want to give this command every time, so it's better to 
  875: define the `defaultroute` entry in the `/etc/rc.conf` file: the default route 
  876: will be set automatically during system initialization, using the defaultroute 
  877: option as an argument to the `route add default` command.
  878: 
  879: If the client machine is not using NetBSD, the configuration will be different. 
  880: On Windows PCs you need to set the gateway property of the TCP/IP protocol to 
  881: the IP address of the NetBSD gateway.
  882: 
  883: That's all that needs to be done on the client machines.
  884: 
  885: ### Some useful commands
  886: 
  887: The following commands can be useful for diagnosing problems:
  888: 
  889:  * `ping` -- tries to connect to other computers via ICMP (usually used for 
  890:    testing if a connection exists).
  891:  * `netstat -r` -- Displays the routing tables (similar to `route show`).
  892:  * `traceroute` -- On the client it shows the route followed by the packets to 
  893:    their destination.
  894:  * `tcpdump` -- Use on the gateway to monitor TCP/IP traffic.
  895: 
  896: ## Setting up a network bridge device
  897: 
  898: A bridge can be used to combine different physical networks into one logical 
  899: network, i.e. connect them at layer 2 of the ISO-OSI model, not at layer 3, 
  900: which is what a router would do. The NetBSD `bridge` driver provides bridge 
  901: functionality on NetBSD systems.
  902: 
  903: ### Bridge example
  904: 
  905: In this example two physical networks are going to be combined in one logical 
  906: network, 192.168.1.0, using a NetBSD bridge. The NetBSD machine which is going 
  907: to act as bridge has two interfaces, ne0 and ne1, which are each connected to 
  908: one physical network.
  909: 
  910: The first step is to make sure support for the `bridge` is compiled in the 
  911: running kernel. Support is included in the GENERIC kernel.
  912: 
  913: When the system is ready the bridge can be created, this can be done using the 
  914: [brconfig(8)]((http://netbsd.gw.com/cgi-bin/man-cgi?brconfig+8+NetBSD-current))
  915: command. First of a bridge interface has to be created. With the following 
  916: `ifconfig` command the `bridge0` interface will be created:
  917: 
  918:     $ ifconfig bridge0 create
  919: 
  920: Please make sure that at this point both the ne0 and ne1 interfaces are up. The 
  921: next step is to add the ne0 and ne1 interfaces to the bridge.
  922: 
  923:     $ brconfig bridge0 add ne0 add ne1 up
  924: 
  925: This configuration can be automatically set up by creating an 
  926: `/etc/ifconfig.interface` file, in this case `/etc/ifconfig.bridge0`, with the 
  927: following contents:
  928: 
  929:     create
  930:             !brconfig $int add ne0 add ne1 up
  931: 
  932: After setting up the bridge the bridge configuration can be displayed using the 
  933: `brconfig -a` command. Remember that if you want to give the bridge machine an 
  934: IP address you can only allocate an IP address to one of the interfaces which 
  935: are part of the bridge.
  936: 
  937: ## A common LAN setup
  938: 
  939: The small home network discussed in the previous section contained many items 
  940: that were configured manually. In bigger LANs that are centrally managed, one 
  941: can expect Internet connectivity being available via some router, a DNS server 
  942: being available, and most important, a DHCP server which hands out IP addresses 
  943: to clients on request. To make a NetBSD client run in such an environment, it's 
  944: usually enough to set
  945: 
  946:     dhclient=yes
  947: 
  948: in `/etc/rc.conf`, and the IP address will be set automatically, 
  949: `/etc/resolv.conf` will be created and routing setup to the default router.
  950: 
  951: ## Connecting two PCs through a serial line
  952: 
  953: If you need to transfer files between two PCs which are not networked there is a 
  954: simple solution which is particularly handy when copying the files to a floppy 
  955: is not practical: the two machines can be networked with a serial cable (a *null 
  956: modem* cable). The following sections describe some configurations.
  957: 
  958: ### Connecting NetBSD with BSD or Linux
  959: 
  960: The easiest case is when both machines run NetBSD: making a connection with the 
  961: SLIP protocol is very easy. On the first machine write the following commands:
  962: 
  963:     # slattach /dev/tty00
  964:     # ifconfig sl0 inet 192.168.1.1 192.168.1.2
  965: 
  966: On the second machine write the following commands:
  967: 
  968:     # slattach /dev/tty00
  969:     # ifconfig sl0 inet 192.168.1.2 192.168.1.1
  970: 
  971: Now you can test the connection with `ping`; for example, on the second PC 
  972: write:
  973: 
  974:     # ping 192.168.1.1
  975: 
  976: If everything worked there is now an active network connection between the two 
  977: machines and ftp, telnet and other similar commands can be executed. The textual 
  978: aliases of the machines can be written in the `/etc/hosts` file.
  979: 
  980:  * In the previous example both PCs used the first serial port (`/dev/tty0`). 
  981:    Substitute the appropriate device if you are using another port.
  982: 
  983:  * IP addresses like 192.168.x.x are reserved for `internal` networks. The first 
  984:    PC has address 192.168.1.1 and the second 192.168.1.2.
  985: 
  986:  * To achieve a faster connection the `-s speed` option to `slattach` can be 
  987:    specified.
  988: 
  989:  * `ftp` can be used to transfer files only if inetd is active and the ftpd 
  990:  * server is enabled.
  991: 
  992: ### Linux
  993: 
  994: If one of the two PCs runs Linux, the commands are slightly different (on the 
  995: Linux machine only). If the Linux machine gets the 192.168.1.2 address, the 
  996: following commands are needed:
  997: 
  998:     # slattach -p slip -s 115200 /dev/ttyS0 &
  999:     # ifconfig sl0 192.168.1.2 pointopoint 192.168.1.1 up
 1000:     # route add 192.168.1.1 dev sl0
 1001: 
 1002: Don't forget the `&` in the first command.
 1003: 
 1004: ### Connecting NetBSD and Windows NT
 1005: 
 1006: NetBSD and Windows NT can be (almost) easily networked with a serial *null 
 1007: modem* cable. Basically what needs to be done is to create a *Remote Access* 
 1008: connection under Windows NT and to start pppd on NetBSD.
 1009: 
 1010: Start pppd as root after having created a `.ppprc` in `/root`. Use the following 
 1011: example as a template.
 1012: 
 1013:     connect '/usr/sbin/chat -v CLIENT CLIENTSERVER'
 1014:     local
 1015:     tty00
 1016:     115200
 1017:     crtscts
 1018:     lock
 1019:     noauth
 1020:     nodefaultroute
 1021:     :192.168.1.2
 1022: 
 1023: The meaning of the first line will be explained later in this section; 
 1024: 192.168.1.2 is the IP address that will be assigned by NetBSD to the Windows NT 
 1025: host; `tty00` is the serial port used for the connection (first serial port).
 1026: 
 1027: On the NT side a *null modem* device must be installed from the Control Panel 
 1028: (Modem icon) and a Remote Access connection using this modem must be created. 
 1029: The null modem driver is standard under Windows NT 4 but it's not a 100% null 
 1030: modem: when the link is activated, NT sends the string CLIENT and expects to 
 1031: receive the answer CLIENTSERVER. This is the meaning of the first line of the 
 1032: `.ppprc` file: `chat` must answer to NT when the connection is activated or 
 1033: the connection will fail.
 1034: 
 1035: In the configuration of the Remote Access connection the following must be 
 1036: specified: use the null modem, telephone number `1` (it's not used, anyway), PPP 
 1037: server, enable only TCP/IP protocol, use IP address and nameservers from the 
 1038: server (NetBSD in this case). Select the hardware control flow and set the port 
 1039: to 115200 8N1.
 1040: 
 1041: Now everything is ready to activate the connection.
 1042: 
 1043:  * Connect the serial ports of the two machines with the null modem cable.
 1044:  * Launch pppd on NetBSD. To see the messages of pppd:
 1045:    `tail -f /var/log/messages`).
 1046:  * Activate the Remote Access connection on Windows NT.
 1047: 
 1048: ### Connecting NetBSD and Windows 95
 1049: 
 1050: The setup for Windows 95 is similar to the one for Windows NT: Remote Access on 
 1051: Windows 95 and the PPP server on NetBSD will be used. Most (if not all) Windows 
 1052: 95 releases don't have the *null modem* driver, which makes things a little more 
 1053: complicated. The easiest solution is to find one of the available null modem 
 1054: drivers on the Internet (it's a small `.INF` file) and repeat the same steps as 
 1055: for Windows NT. The only difference is that the first line of the `.ppprc` file 
 1056: (the one that calls `chat`) can be removed.
 1057: 
 1058: If you can't find a real null modem driver for Windows 95 it's still possible to 
 1059: use a little trick:
 1060: 
 1061:  * Create a Remote Access connection like the one described before for Windows 
 1062:    NT, but using the *Standard Modem*.
 1063: 
 1064:  * In `.ppprc` substitute the line that calls `chat` with the following line
 1065: 
 1066:        connect '/usr/sbin/chat -v ATH OK AT OK ATE0V1 OK AT OK ATDT CONNECT'
 1067: 
 1068:  * Activate the connection as described in the section before for Windows NT.
 1069: 
 1070: 
 1071: In this way the `chat` program, called when the connection is activated, 
 1072: emulates what Windows 95 thinks is a standard modem, returning to Windows 95 the 
 1073: same answers that a standard modem would return. Whenever Windows 95 sends a 
 1074: modem command string, `chat` returns OK.
 1075: 
 1076: ## IPv6 Connectivity & Transition via 6to4
 1077: 
 1078: This section will concentrate on how to get network connectivity for IPv6 and - 
 1079: as that is rarely available directly - talk at length about the alternatives to 
 1080: native IPv6 connectivity as a transitional method until native IPv6 peers are 
 1081: available.
 1082: 
 1083: Finding an ISP that offers IPv6 natively needs quite some luck. What you need 
 1084: next is a router that will be able to handle the traffic. To date, not all 
 1085: router manufacturers offer IPv6 or hardware accelerated IPv6 features, and 
 1086: gateway NAT boxes only rarely support IPv6 and also block IPv6 tunnels. An 
 1087: alternative approach involves configuring a standard PC running NetBSD to act as 
 1088: a router. The base NetBSD system contains a complete IPv6 routing solution, and 
 1089: for special routing needs software like Zebra can provide additional routing 
 1090: protocols. This solution is rather common for sites that want IPv6 
 1091: connectivity today. The drawbacks are that you need an ISP that supports 
 1092: IPv6 and that you may need a dedicated uplink only for IPv6.
 1093: 
 1094: IPv6 to-the-door may be rare, but you can still get IPv6 connectivity by using 
 1095: tunnels. Instead of talking IPv6 on the wire, the IPv6 packets are encapsulated 
 1096: in IPv4 packets, as shown in the next image. Using the existing IPv4 
 1097: infrastructure, the encapsulated packets are sent to a IPv6-capable uplink that 
 1098: will then remove the encapsulation, and forward the IPv6 packets.
 1099: 
 1100: ![A frequently used method for transition is tunneling IPv6 in IPv4 packets](/guide/images/ipv6-en-2tunnel.gif)  
 1101: **A frequently used method for transition is tunneling IPv6 in IPv4 packets**
 1102: 
 1103: When using tunnels, there are two possibilities. One is to use a so-called 
 1104: *configured* tunnel, the other is called an *automatic* tunnel. A *configured* 
 1105: tunnel is one that required preparation from both ends of the tunnel, usually 
 1106: connected with some kind of registration to exchange setup information. An 
 1107: example for such a configured tunnel is the IPv6-over-IPv4 encapsulation 
 1108: described in
 1109: [RFC1933](http://tools.ietf.org/html/rfc1933) ("RFC 1933: Transition Mechanisms 
 1110: for IPv6 Hosts and Routers"), and that's implemented e.g. by the 
 1111: [gif(4)](http://netbsd.gw.com/cgi-bin/man-cgi?gif+4+NetBSD-5.0.1+i386) 
 1112: device found in NetBSD.
 1113: 
 1114: An *automatic* tunnel consists of a public server that has some kind of IPv6 
 1115: connectivity, e.g. via 6Bone. That server has made its connectivity data public, 
 1116: and also runs a tunneling protocol that does not require an explicit 
 1117: registration of the sites using it as uplink. A well-used example of such a 
 1118: protocol is the 6to4 mechanism described in
 1119: [RFC3056](http://tools.ietf.org/html/rfc3056) ("RFC 3056: Connection of IPv6 
 1120: Domains via IPv4 Clouds"), and that is implemented in the 
 1121: [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) device 
 1122: found in NetBSD's. Another mechanism that does not require registration of 
 1123: IPv6-information is the 6over4 mechanism, which implements transporting of IPv6 
 1124: over a multicast-enabled IPv4 network, instead of e.g. ethernet or FDDI.  6over4 
 1125: is documented in [RFC2529](http://tools.ietf.org/html/rfc2529) ("RFC 2529: 
 1126: Transmission of IPv6 over IPv4 Domains without Explicit Tunnels"). It's main 
 1127: drawback is that you do need existing multicast infrastructure. If you don't 
 1128: have that, setting it up is about as much effort as setting up a configured IPv6 
 1129: tunnel directly, so it's usually not worth bothering in that case.
 1130: 
 1131: ### Getting 6to4 IPv6 up & running
 1132: 
 1133: 6to4 is an easy way to get IPv6 connectivity for hosts that only have an IPv4 
 1134: uplink, especially if you have the background given in
 1135: [[the chapter about IPv6|guide/net-intro#ipv6-intro]]. It can be used with 
 1136: static as well as dynamically assigned IPv4 addresses, e.g. as found in modem 
 1137: dialup scenarios today. When using dynamic IPv4 addresses, a change of IP 
 1138: addresses will be a problem for incoming traffic, i.e. you can't run persistent 
 1139: servers.
 1140: 
 1141: Example configurations given in this section are for NetBSD 1.5.2.
 1142: 
 1143: ### Obtaining IPv6 Address Space for 6to4
 1144: 
 1145: The 6to4 IPv6 setup on your side doesn't consist of a single IPv6 address; 
 1146: Instead, you get a whole /48 network! The IPv6 addresses are derived from your 
 1147: (single) IPv4 address. The address prefix *2002:` is reserved for 6to4 based 
 1148: addresses (i.e. IPv6 addresses derived from IPv4 addresses). The next 32 bits 
 1149: are your IPv4 address. This results in a /48 network that you can use for your 
 1150: very own purpose. It leaves 16 bits space for 2^16^ IPv6 subnets, which can take 
 1151: up to 2^64^ nodes each. The next figure illustrates the building of your IPv6 
 1152: address (range) from your IPv4 address.
 1153: 
 1154: Thanks to the 6to4 prefix and your worldwide unique IPv4 address, this address 
 1155: block is unique, and it's mapped to your machine carrying the IPv4 address in 
 1156: question.
 1157: 
 1158: ![6to4 derives an IPv6 from an IPv4 address](/guide/images/ipv6-en-3adr.gif)  
 1159: **6to4 derives an IPv6 from an IPv4 address**
 1160: 
 1161: ### How to get connected
 1162: 
 1163: In contrast to the configured *IPv6-over-IPv4 tunnel* setup, you do not have to 
 1164: register at a 6bone-gateway, which would only then forward your IPv6 traffic 
 1165: encapsulated in IPv4. Instead, as your IPv6 address is derived from your IPv4 
 1166: address, inbound traffic can be sent through the nearest 6to4 relay router. 
 1167: De-encapsulation of the packet is done via a 6to4-capable network interface, 
 1168: which then forwards the resulting IPv6 packet according to your routing setup 
 1169: (in case you have more than one machine connected on your 6to4 assigned 
 1170: network).
 1171: 
 1172: To transmit IPv6 packets, the 6to4 router will encapsulate them inside IPv4 
 1173: packets; a system performing these functions is called a 6to4 border router. 
 1174: These packets have a default route to the *6to4 relay anycast prefix*. This 
 1175: anycast prefix will route the tunnel to a *6to4 relay router*.
 1176: 
 1177: ![Request and reply can be routed via different gateways in 6to4](/guide/images/ipv6-en-1scene.gif)  
 1178: **Request and reply can be routed via different gateways in 6to4**
 1179: 
 1180: ### Security Considerations
 1181: 
 1182: In contrast to the *configured tunnel* setup, you usually can't setup packet 
 1183: filters to block 6to4-packets from unauthorized sources, as this is exactly how 
 1184: (and why) 6to4 works at all. As such, malicious users can send packets with 
 1185: invalid/hazardous IPv6 payload. If you don't already filter on your border 
 1186: gateways anyways, packets with the following characteristics should not be 
 1187: allowed as valid 6to4 packets, and some firewalling seems to be justified for 
 1188: them:
 1189: 
 1190:  * unspecified IPv4 source/destination address: 0.0.0.0/8
 1191:  * loopback address in outer (v4) source/destination: 127.0.0.0/8
 1192:  * IPv4 multicast in source/destination: 224.0.0.0/4
 1193:  * limited broadcasts: 255.0.0.0/8
 1194:  * subnet broadcast address as source/destination: depends on your IPv4 setup
 1195: 
 1196: The NetBSD 
 1197: [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) manual 
 1198: page documents some common configuration mistakes intercepted by default by the 
 1199: KAME stack as well as some further advice on filtering, but keep in mind that 
 1200: because of the requirement of these filters, 6to4 is not perfectly secure. 
 1201: Still, if forged 6to4 packets become a problem, you can use IPsec authentication 
 1202: to ensure the IPv6 packets are not modified.
 1203: 
 1204: ### Data Needed for 6to4 Setup
 1205: 
 1206: In order to setup and configure IPv6 over 6to4, a few bits of configuration data 
 1207: must be known in advance. These are:
 1208: 
 1209:  * Your local IPv4 address. It can be determined using either the `ifconfig -a` 
 1210:    or `netstat -i` commands on most Unix systems. If you use a NATing gateway or 
 1211:    something, be sure to use the official, outside-visible address, not your 
 1212:    private (10/8 or 192.168/16) one.
 1213: 
 1214:    We will use 62.224.57.114 as the local IPv4 address in our example.
 1215: 
 1216:  * Your local IPv6 address, as derived from the IPv4 address. See the previous 
 1217:    figure ("6to4 derives an IPv6 from an IPv4 address") about how to do so.
 1218: 
 1219:    For our example, this is 2002:3ee0:3972:0001::1 (62.224.57.114 == 0x3ee03972, 
 1220:    0001::1 arbitrarily chosen).
 1221: 
 1222:  * The *6to4 IPv6 relay anycast address*. which is 2002:c058:6301::, or the IPv6 
 1223:    address of a specific 6to4 relay router you want to use. The IPv6 address 
 1224:    will do, as it also contains the IPv4 address in the usual 6to4 translation.
 1225: 
 1226: ### Kernel Preparation
 1227: 
 1228: To process 6to4 packets, the operating system kernel needs to know about them. 
 1229: For that a driver has to be compiled in that knows about 6to4, and how to handle 
 1230: it. In NetBSD 4.0 and newer, the driver is already present in GENERIC kernel 
 1231: configurations, so the procedure below is usually unnecessary.
 1232: 
 1233: For a NetBSD kernel, put the following into your kernel config file to prepare 
 1234: it for using IPv6 and 6to4, e.g. on NetBSD use:
 1235: 
 1236:     options INET6                 # IPv6
 1237:     pseudo-device stf             # 6to4 IPv6 over IPv4 encapsulation
 1238: 
 1239: Note that the 
 1240: [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) device is 
 1241: not enabled by default on NetBSD releases older than 4.0. Rebuild your kernel, 
 1242: then reboot your system to use the new kernel. Please consult
 1243: [[Compiling the kernel|guide/kernel]] for further information on configuring, 
 1244: building and installing a new kernel!
 1245: 
 1246: ### 6to4 Setup
 1247: 
 1248: This section describes the commands to setup 6to4. In short, the steps performed 
 1249: here are:
 1250: 
 1251:  1. Configure interface
 1252:  2. Set default route
 1253:  3. Setup Router Advertisement, if wanted
 1254: 
 1255: The first step in setting up 6to4 is creating the 6to4 interface and assigning 
 1256: an IPv6 address to it. This is achieved with the 
 1257: [ifconfig(8)](http://netbsd.gw.com/cgi-bin/man-cgi?ifconfig+8+NetBSD-5.0.1+i386) 
 1258: command. Assuming the example configuration above, the commands for NetBSD are:
 1259: 
 1260:     # ifconfig stf0 create
 1261:     # ifconfig stf0 inet6 2002:3ee0:3972:1::1 prefixlen 16 alias
 1262: 
 1263: After configuring the 6to4 device with these commands, routing needs to be 
 1264: setup, to forward all tunneled IPv6 traffic to the 6to4 relay router. The best 
 1265: way to do this is by setting a default route, the command to do so is, for 
 1266: NetBSD:
 1267: 
 1268:     # route add -inet6 default 2002:c058:6301::
 1269: 
 1270: Note that NetBSD's 
 1271: [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) device 
 1272: determines the IPv4 address of the 6to4 uplink from the routing table. Using 
 1273: this feature, it is easy to setup your own 6to4 (uplink) gateway if you have an 
 1274: IPv6 uplink, e.g. via 6Bone.
 1275: 
 1276: After these commands, you are connected to the IPv6-enabled world - 
 1277: Congratulations! Assuming name resolution is still done via IPv4, you can now 
 1278: ping an IPv6-site like www.kame.net or www6.NetBSD.org:
 1279: 
 1280:     # /sbin/ping6 www.kame.net
 1281: 
 1282: As a final step in setting up IPv6 via 6to4, you will want to setup Router 
 1283: Advertisement if you have several hosts on your network. While it is possible to 
 1284: setup 6to4 on each node, doing so will result in very expensive routing from one 
 1285: node to the other - packets will be sent to the remote 6to4 gateway, which will 
 1286: then route the packets back to the neighbor node. Instead, setting up 6to4 on 
 1287: one machine and talking native IPv6 on-wire is the preferred method of handling 
 1288: things.
 1289: 
 1290: The first step to do so is to assign an IPv6-address to your ethernet. In the 
 1291: following example we will assume subnet `2` of the IPv6-net is used for the 
 1292: local ethernet and the MAC address of the ethernet interface is 
 1293: 12:34:56:78:9a:bc, i.e. your local gateway's ethernet interface's IP address 
 1294: will be 2002:3ee0:3972:2:1234:56ff:fe78:9abc. Assign this address to your 
 1295: ethernet interface, e.g.
 1296: 
 1297:     # ifconfig ne0 inet6 alias 2002:3ee0:3972:2:1234:56ff:fe78:9abc
 1298: 
 1299: Here, `ne0` is an example for your ethernet card interface. This will most 
 1300: likely be different for your setup, depending on what kind of card is used.
 1301: 
 1302: Next thing that needs to be ensured for setting up the router is that it will 
 1303: actually forward packets from the local 6to4 device to the ethernet device and 
 1304: back. To enable IPv6 packet forwarding, set `ip6mode=router` in NetBSD's 
 1305: `/etc/rc.conf`, which will result in the `net.inet6.ip6.forwarding` sysctl being 
 1306: set to `1`:
 1307: 
 1308:     # sysctl -w net.inet6.ip6.forwarding=1
 1309: 
 1310: ![Enabling packet forwarding is needed for a 6to4 router](/guide/images/ipv6-en-5forward.gif)  
 1311: **Enabling packet forwarding is needed for a 6to4 router**
 1312: 
 1313: To setup router advertisement on BSD, the file `/etc/rtadvd.conf` needs to be 
 1314: checked. It allows configuration of many things, but usually the default config 
 1315: of not containing any data is ok. With that default, IPv6 addresses found on all 
 1316: of the router's network interfaces will be advertised.
 1317: 
 1318: After checking the router advertisement configuration is correct and IPv6 
 1319: forwarding is turned on, the daemon handling it can be started. Under NetBSD, it 
 1320: is called `rtadvd`. Start it up either manually (for testing it the first time) 
 1321: or via the system's startup scripts, and see all your local nodes automagically 
 1322: configure the advertised subnet address in addition to their already-existing 
 1323: link local address.
 1324: 
 1325:     # rtadvd
 1326: 
 1327: ### Quickstart using pkgsrc/net/hf6to4
 1328: 
 1329: So far, we have described how 6to4 works and how to set it up manually. For an 
 1330: automated way to make everything happen e.g. when going online, the 'hf6to4' 
 1331: package is convenient. It will determine your IPv6 address from the IPv4 address 
 1332: you got assigned by your provider, then set things up that you are connected.
 1333: 
 1334: Steps to setup the pkgsrc/net/hf6to4 package are:
 1335: 
 1336:  1. Install the package either by compiling it from pkgsrc, or by `pkg_add`'ing 
 1337:     the 6to4-1.2 package.
 1338: 
 1339:         # cd /usr/pkgsrc/net/hf6to4
 1340:         # make install
 1341: 
 1342:  2. Make sure you have the 
 1343:     [stf(4)](http://netbsd.gw.com/cgi-bin/man-cgi?stf+4+NetBSD-5.0.1+i386) 
 1344:     pseudo-device in your kernel, see above.
 1345: 
 1346:  3. Configure the 'hf6to4' package. First, copy 
 1347:     `/usr/pkg/share/examples/hf6to4/hf6to4.conf` to `/usr/pkg/etc/hf6to4.conf`, 
 1348:     then adjust the variables. Note that the file is in /bin/sh syntax.
 1349: 
 1350:         # cd /usr/pkg/etc
 1351:         # cp ../share/examples/hf6to4/hf6to4.conf hf6to4.conf
 1352:         # vi hf6to4.conf
 1353: 
 1354: 	Please see the 
 1355: 	[hf6to4(8)](http://netbsd.gw.com/cgi-bin/man-cgi?hf6to4+8+NetBSD-5.0.1+i386) 
 1356: 	manpage for an explanation of all the variables you can set in 
 1357: 	`hf6to4.conf`. If you have dialup IP via PPP, and don't want to run Router 
 1358: 	Advertizing for other IPv6 machines on your home or office network, you 
 1359: 	don't need to configure anything. If you want to setup Router Advertising, 
 1360: 	you need to set the `in_if` to the internal (ethernet) interface, e.g.
 1361: 
 1362:         $in_if="rtk0";            # Inside (ethernet) interface
 1363: 
 1364:  4. Now dial up, then start the 6to4 command manually:
 1365: 
 1366:         # /usr/pkg/sbin/hf6to4 start
 1367: 
 1368:  5. After that, you should be connected, use 
 1369:     [ping6(8)](http://netbsd.gw.com/cgi-bin/man-cgi?ping6+8+NetBSD-5.0.1+i386): to 
 1370:     see if everything works:
 1371: 
 1372:         # ping6 www.NetBSD.org
 1373:         PING6(56=40+8+8 bytes) 2002:d954:110b:1::1 --> 2001:4f8:4:7:2e0:81ff:fe52:9a6b
 1374:         16 bytes from 2001:4f8:4:7:2e0:81ff:fe52:9a6b, icmp_seq=0 hlim=60 time=250.234 ms
 1375:         16 bytes from 2001:4f8:4:7:2e0:81ff:fe52:9a6b, icmp_seq=1 hlim=60 time=255.652 ms
 1376:         16 bytes from 2001:4f8:4:7:2e0:81ff:fe52:9a6b, icmp_seq=2 hlim=60 time=251.237 ms
 1377:         ^C
 1378:         --- www.NetBSD.org ping6 statistics ---
 1379:         3 packets transmitted, 3 packets received, 0.0% packet loss
 1380:         round-trip min/avg/max/std-dev = 250.234/252.374/255.652/2.354 ms
 1381:         
 1382:         # traceroute6 www.NetBSD.org
 1383:         traceroute6 to www.NetBSD.org (2001:4f8:4:7:2e0:81ff:fe52:9a6b)
 1384:         from 2002:d954:110b:1::1, 64 hops max, 12 byte packets
 1385:         1  2002:c25f:6cbf:1::1  66.31 ms  66.382 ms  69.062 ms
 1386:         2  nr-erl1.6win.dfn.de  76.134 ms *  76.87 ms
 1387:         3  nr-fra1.6win.dfn.de  76.371 ms  80.709 ms  79.482 ms
 1388:         4  dfn.de6.de.6net.org  92.763 ms  90.863 ms  94.322 ms
 1389:         5  de.nl6.nl.6net.org  116.115 ms  93.463 ms  96.331 ms
 1390:         6  nl.uk6.uk.6net.org  103.347 ms  99.334 ms  100.803 ms
 1391:         7  uk1.uk61.uk.6net.org  99.481 ms  100.421 ms  100.119 ms
 1392:         8  2001:798:28:300::2  89.711 ms  90.435 ms  90.035 ms
 1393:         9  ge-1-0-0-2.r20.londen03.uk.bb.verio.net  179.671 ms  185.141 ms  185.86 ms
 1394:         10  p16-0-0-0.r81.nycmny01.us.bb.verio.net  177.067 ms  179.086 ms  178.05 ms
 1395:         11  p16-1-1-3.r20.nycmny01.us.bb.verio.net  178.04 ms  179.727 ms  184.165 ms
 1396:         12  p16-0-1-1.r20.mlpsca01.us.bb.verio.net  249.856 ms  247.476 ms  249.012 ms
 1397:         13  p64-0-0-0.r21.snjsca04.us.bb.verio.net  239.691 ms  241.404 ms  240.998 ms
 1398:         14  p64-0-0-0.r21.plalca01.us.bb.verio.net  247.541 ms  246.661 ms  246.359 ms
 1399:         15  xe-0-2-0.r20.plalca01.us.bb.verio.net  240.987 ms 239.056 ms  241.251 ms
 1400:         16  ge-6-1.a01.snfcca05.us.ra.verio.net  240.868 ms  241.29 ms  242.337 ms
 1401:         17  fa-5-2.a01.snfcca05.us.ce.verio.net  249.477 ms  250.4 ms  256.035 ms
 1402:         18  2001:4f8:4:7:2e0:81ff:fe52:9a6b  268.164 ms  252.97 ms  252.366 ms 
 1403: 
 1404: 	Please note that `traceroute6` shows the v6 hops only, any underlying 
 1405: 	tunnels are invisible and thus not displayed.
 1406: 
 1407:  6. If this works, you can put the following lines into your `/etc/ppp/ip-up` 
 1408:     script to run the command each time you go online:
 1409: 
 1410:         logger -p user.info -t ip-up Configuring 6to4 IPv6
 1411:         /usr/pkg/sbin/hf6to4 stop
 1412:         /usr/pkg/sbin/hf6to4 start
 1413: 
 1414:  7. If you want to route IPv6 for your LAN, you can instruct `6to4.pl` to setup 
 1415:     Router Advertising for you too:
 1416: 
 1417:         # /usr/pkg/sbin/hf6to4 rtadvd-start
 1418: 
 1419:     You can put that command into `/etc/ppp/ip-up` as well to make it permanent.
 1420: 
 1421:  8. If you have changed `/etc/ppp/ip-up` to setup 6to4 automatically, you will 
 1422: 	most likely want to change `/etc/ppp/ip-down` too, to shut it down when you 
 1423: 	go offline. Here's what to put into `/etc/ppp/ip-down`:
 1424: 
 1425:         logger -p user.info -t ip-down Shutting down 6to4 IPv6
 1426:         /usr/pkg/sbin/hf6to4 rtadvd-stop
 1427:         /usr/pkg/sbin/hf6to4 stop
 1428: 
 1429: ### Known 6to4 Relay Routers
 1430: 
 1431: It is normally not necessary to pick a specific 6to4 relay router, but if 
 1432: necessary, you may find a list of known working routers at 
 1433: [http://www.kfu.com/\~nsayer/6to4/](http://www.kfu.com/~nsayer/6to4/). In tests, 
 1434: only 6to4.kfu.com and 6to4.ipv6.microsoft.com were found working. Cisco has one 
 1435: that requires registration, see 
 1436: [http://www.cisco.com/ipv6/](http://www.cisco.com/ipv6/).
 1437: 
 1438: There's also an experimental 6to4 server located in Germany, 
 1439: 6to4.ipv6.fh-regensburg.de. This server runs under NetBSD 1.6 and was setup 
 1440: using the configuration steps described above. The whole configuration of the 
 1441: machine can be seen at 
 1442: [http://www.feyrer.de/IPv6/netstart.local](http://www.feyrer.de/IPv6/netstart.local).
 1443: 
 1444: ### Tunneling 6to4 through an IPFilter firewall
 1445: 
 1446: The 6to4 protocol encapsulates IPv6 packets in IPv4, and gives them their own IP 
 1447: type, which most firewalls block as unknown, as their payload type is directly 
 1448: `TCP`, `UDP` or `ICMP`. Usually, you want to setup your 6to4 gateway on the same 
 1449: machine that is directly connected to the (IPv4) internet, and which usually 
 1450: runs the firewall. For the case that you want to run your 6to4 gateway behind a 
 1451: firewall, you need to drill a hole into the firewall, to let 6to4 packets 
 1452: through. Here is how to do this!
 1453: 
 1454: The example assumes that you use the `ppp0` interface on your firewall to 
 1455: connect to the Internet.
 1456: 
 1457: Put the following lines into `/etc/ipf.conf` to allow your IPFilter firewall let 
 1458: all 6to4 packets pass (lines broken with `\` due to space restrictions; please 
 1459: put them lines continued that way all in one line):
 1460: 
 1461:     # Handle traffic by different rulesets
 1462:     block in  quick on ppp0 all head 1
 1463:     block out quick on ppp0 all head 2
 1464:     
 1465:     ### Incoming packets:
 1466:     # allow some IPv4:
 1467:     pass  in  log quick on ppp0 proto tcp from any to any \
 1468:     port = www flags S keep state keep frags  group 1
 1469:     pass  in      quick on ppp0 proto tcp from any to any \
 1470:     port = ssh keep state         group 1
 1471:     pass  in      quick on ppp0 proto tcp from any to any \
 1472:     port = mail keep state        group 1
 1473:     pass  in  log quick on ppp0 proto tcp from any to any \
 1474:     port = ftp keep state       group 1
 1475:     pass  in  log quick on ppp0 proto tcp from any to any \
 1476:     port = ftp-data keep state      group 1
 1477:     pass  in  log quick on ppp0 proto icmp from any to any        group 1
 1478:     # allow all IPv6:
 1479:     pass in       quick on ppp0 proto ipv6       from any to any  group 1
 1480:     pass in  log  quick on ppp0 proto ipv6-route from any to any  group 1
 1481:     pass in  log  quick on ppp0 proto ipv6-frag  from any to any  group 1
 1482:     pass in  log  quick on ppp0 proto ipv6-icmp  from any to any  group 1
 1483:     pass in  log  quick on ppp0 proto ipv6-nonxt from any to any  group 1
 1484:     pass in  log  quick on ppp0 proto ipv6-opts  from any to any  group 1
 1485:     # block rest:
 1486:     blockin  log  quick on ppp0 all                               group 1
 1487:     
 1488:     ### Outgoing packets:
 1489:     # allow usual stuff:
 1490:     pass  out     quick on ppp0 proto  tcp from any to any flags S \
 1491:     keep state keep frags group 2
 1492:     pass  out     quick on ppp0 proto  udp from any to any         \
 1493:     keep state keep frags group 2
 1494:     pass  out     quick on ppp0 proto icmp from any to any         \
 1495:     keep state            group 2
 1496:     # allow all IPv6:
 1497:     pass out      quick on ppp0 proto ipv6       from any to any  group 2
 1498:     pass out log  quick on ppp0 proto ipv6-route from any to any  group 2
 1499:     pass out log  quick on ppp0 proto ipv6-frag  from any to any  group 2
 1500:     pass out log  quick on ppp0 proto ipv6-icmp  from any to any  group 2
 1501:     pass out log  quick on ppp0 proto ipv6-nonxt from any to any  group 2
 1502:     pass out log  quick on ppp0 proto ipv6-opts  from any to any  group 2
 1503:     # block rest:
 1504:     block out log quick on ppp0 all             group 2
 1505: 
 1506: Now any host on your network can send (the `out` rules) and receive (the `in` 
 1507: rules) v4-encapsulated IPv6 packets, allowing setup of any of them as a 6to4 
 1508: gateway. Of course you only want to do this on one host and use native IPv6 
 1509: between your hosts, and you may also want to enforce this with more restrictive 
 1510: rulesets, please see 
 1511: [ipf.conf(5)](http://netbsd.gw.com/cgi-bin/man-cgi?ipf.conf+5+NetBSD-5.0.1+i386) 
 1512: for more information on IPFilter rules.
 1513: 
 1514: After your firewall lets pass encapsulated IPv6 packets, you may want to set up 
 1515: your 6to4 gateway to monitor the IPv6 traffic, or even restrict it. To do so, 
 1516: you need to setup IPFilter on your 6to4 gateway as well. For basic monitoring, 
 1517: enable `ipfilter=yes` in `/etc/rc.conf` and put the following into 
 1518: `/etc/ipf6.conf`:
 1519: 
 1520:     pass in  log quick on stf0 from any to any
 1521:     pass out log quick on stf0 from any to any
 1522: 
 1523: This logs all (IPv6) traffic going in and out of your `stf0` tunneling 
 1524: interface. You can add filter rules as well if needed.
 1525: 
 1526: If you are more interested in traffic stats than a general overview of your 
 1527: network traffic, using MRTG in conjunction with the `net-snmp` package is 
 1528: recommended instead of analyzing IPFilter log files.
 1529: 
 1530: ### Conclusion & Further Reading
 1531: 
 1532: Compared to where IPv4 is today, IPv6 is still in its early steps. It is 
 1533: working, there are all sort of services and clients available, only the userbase 
 1534: is missing. It is hoped the information provided here helps people better 
 1535: understand what IPv6 is, and to start playing with it.
 1536: 
 1537: A few links should be mentioned here for interested parties:
 1538: 
 1539:  * An example script to setup 6to4 on BSD based machines is available at 
 1540:    <http://www.NetBSD.org/packages/net/hf6to4/>. The script determines your IPv6 
 1541:    address and sets up 6to4 and (if wanted) router advertising. It was designed 
 1542:    to work in dialup setups with changing IPv4 addresses.
 1543: 
 1544:  * Given that there isn't a standard for IPv6 in Linux land today, there are 
 1545:    different setup instructions for most distributions. The setup of IPv6 on 
 1546:    Debian GNU/Linux can be found at 
 1547:    [http://people.debian.org/\~csmall/ipv6/setup.html](http://people.debian.org/~csmall/ipv6/setup.html).
 1548: 
 1549:  * The BSD Unix implementations have their own IPv6 documentation each, 
 1550:    interesting URLs are <http://www.NetBSD.org/docs/network/ipv6/> for NetBSD, 
 1551:    <http://www.freebsd.org/doc/en\_US.ISO8859-1/books/handbook/network-ipv6.html> 
 1552:    for FreeBSD.
 1553: 
 1554:  * Projects working on implementing IPv6 protocol stacks for free Unix like 
 1555:    operating systems are KAME for BSD and USAGI for Linux. Their web sites can 
 1556:    be found at <http://www.kame.net/> and <http://www.linux-ipv6.org/>. A list 
 1557:    of host and router implementations can be found at 
 1558:    <http://playground.sun.com/pub/ipng/html/ipng-implementations.html>.
 1559: 
 1560:  * Besides the official RFC archive at <ftp://ftp.isi.edu/in-notes>, information 
 1561:    on IPv6 can be found at several web sites. First and foremost, the 6Bone's 
 1562:    web page at <http://www.6bone.net/> must be mentioned. 6Bone was started as 
 1563:    the testbed for IPv6, and is now an important part of the IPv6-connected 
 1564:    world. Other web pages that contain IPv6-related contents include 
 1565:    <http://www.ipv6.org/>, <http://playground.sun.com/pub/ipng/html/> and 
 1566:    <http://www.ipv6forum.com/>. Most of these sites carry further links - be 
 1567:    sure to have a look!
 1568: 

CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb