Diff for /wikisrc/guide/misc.mdwn between versions 1.3 and 1.4

version 1.3, 2013/03/21 11:11:21 version 1.4, 2015/06/19 19:18:31
Line 13  This chapter collects various topics, in Line 13  This chapter collects various topics, in
 Sysinst, the NetBSD installation program, usually installs the NetBSD boot  Sysinst, the NetBSD installation program, usually installs the NetBSD boot
 manager on the hard disk. The boot manager can also be installed or reconfigured  manager on the hard disk. The boot manager can also be installed or reconfigured
 at a later time, if needed, with the  at a later time, if needed, with the
 [fdisk(8)](http://netbsd.gw.com/cgi-bin/man-cgi?fdisk+8+NetBSD-current)  [[!template id=man name="fdisk" section="8"]]
 command. For example:  command. For example:
   
     # fdisk -B wd0      # fdisk -B wd0
Line 35  known as `fdisk /mbr` from DOS) and then Line 35  known as `fdisk /mbr` from DOS) and then
 ### installboot  ### installboot
   
 There is another tool for installing a bootloader, named  There is another tool for installing a bootloader, named
 [installboot(8)](http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current).  [[!template id=man name="installboot" section="8"]].
 Depending on the platform you are using, its usage differs, so you should read  Depending on the platform you are using, its usage differs, so you should read
 the manpage and its extensive *EXAMPLES* section.  the manpage and its extensive *EXAMPLES* section.
   
Line 64  NetBSD. On other ports, the whole device Line 64  NetBSD. On other ports, the whole device
   
 I found this tip on a mailing list (I don't remember the author). To output a  I found this tip on a mailing list (I don't remember the author). To output a
 sound from the speaker (for example at the end of a long script) the  sound from the speaker (for example at the end of a long script) the
 [spkr(4)](http://netbsd.gw.com/cgi-bin/man-cgi?spkr+4+NetBSD-current)  [[!template id=man name="spkr" section="4"]]
 driver can be used in the kernel config, which is mapped on `/dev/speaker`. For  driver can be used in the kernel config, which is mapped on `/dev/speaker`. For
 example:  example:
   
Line 142  NetBSD. Line 142  NetBSD.
 When the SCSI controller has been physically installed in the system and the new  When the SCSI controller has been physically installed in the system and the new
 hard disk has been connected, it's time to restart the computer and check that  hard disk has been connected, it's time to restart the computer and check that
 the device is correctly detected, using the  the device is correctly detected, using the
 [dmesg(8)](http://netbsd.gw.com/cgi-bin/man-cgi?dmesg+8+NetBSD-current)  [[!template id=man name="dmesg" section="8"]]
 command. This is the sample output for an NCR-875 controller:  command. This is the sample output for an NCR-875 controller:
   
     ncr0 at pci0 dev 15 function 0: ncr 53c875 fast20 wide scsi      ncr0 at pci0 dev 15 function 0: ncr 53c875 fast20 wide scsi
Line 159  kernel that you are using; if necessary, Line 159  kernel that you are using; if necessary,
 [[Compiling the kernel|guide/kernel]]).  [[Compiling the kernel|guide/kernel]]).
   
 Now the partitions can be created using the  Now the partitions can be created using the
 [fdisk(8)](http://netbsd.gw.com/cgi-bin/man-cgi?fdisk+8+NetBSD-current)  [[!template id=man name="fdisk" section="8"]]
 command. First, check the current status of the disk:  command. First, check the current status of the disk:
   
     # fdisk sd0      # fdisk sd0

Removed from v.1.3  
changed lines
  Added in v.1.4


CVSweb for NetBSD wikisrc <wikimaster@NetBSD.org> software: FreeBSD-CVSweb