File:  [NetBSD Developer Wiki] / wikisrc / guide / exinst.mdwn
Revision 1.6: download - view: text, annotated - select for diffs
Fri Jun 19 19:18:31 2015 UTC (6 years, 3 months ago) by plunky
Branches: MAIN
CVS tags: HEAD
replace direct links to manpages on with templates

    1: **Contents**
    3: [[!toc levels=3]]
    5: # Example installation
    7: ## Introduction
    9: This chapter will guide you through the installation process. The concepts
   10: presented here apply to all installation methods. The only difference is in the
   11: way the distribution sets are fetched by the installer. Some details of the
   12: installation differ depending on the NetBSD release: The examples from this
   13: chapter were created with NetBSD 5.0.
   15: ### Note
   17: The following install screens are just examples. Do not simply copy them, as
   18: your hardware and configuration details may be different!
   20: ## The installation process
   22: The installation process is divided logically in two parts. In the first part
   23: you create a partition for NetBSD and write the disklabel for that partition. In
   24: the second part you decide which distribution sets (subsets of the operating
   25: system) you want to install and then extract the files into the newly created
   26: partition(s).
   28: ## Keyboard layout
   30: [[!table data="""
   31: US | IT | DE | FR
   32: `-` | `'` | `ß` | `)`
   33: `/` | `-` | `-` | `!`
   34: `=` | `ì` | `'` | `-`
   35: `:` | `ç` | `Ö` | `M`
   36: `;` | `ò` | `ö` | `m`
   37: `#` | `£` | `§` | `3`
   38: `"` | `°` | `Ä` | `%`
   39: `*` | `(` | `(` | `8`
   40: `(` | `)` | `)` | `9`
   41: `)` | `=` | `=` | `0`
   42: `'` | `à` | `ä` | `ù`
   43: `` ` `` | `\` | `^` | `@`
   44: `\` | `ù` | `#` | `` ` ``
   45: """]]
   47: The NetBSD install program sysinst allows you to change the keyboard layout
   48: during the installation. If for some reason this does not work for you, you can
   49: use the map in the following table.
   51: ## Starting the installation
   53: To start the installation of NetBSD, insert your chosen boot media (CD/DVD, USB
   54: drive, floppy, etc.) and reboot the computer. The kernel on the installation
   55: medium will be booted and start displaying a lot of messages on the screen about
   56: hardware being detected.
   58: ![Selecting the language](/guide/images/exinst_language.png)  
   59: **Selecting the language**
   61: When the kernel has booted you will find yourself in the NetBSD installation
   62: program, sysinst, shown in the previous figure. From here on you should follow
   63: the instructions displayed on the screen, using the `INSTALL` document as a
   64: companion reference. You will find the INSTALL document in various formats in
   65: the root directory of the NetBSD release. The sysinst screens all have more or
   66: less the same layout: the upper part of the screen shows a short description of
   67: the current operation or a short help message, and the rest of the screen is
   68: made up of interactive menus and prompts. To make a choice, use the cursor keys,
   69: the `Ctrl+N` (next) and `Ctrl+P` (previous) keys, or press one of the letters
   70: displayed left of each choice. Confirm your choice by pressing the Return key.
   72: Start by selecting the language you prefer to use for the installation process.
   74: The next screen will allow you to select a suitable keyboard type:
   76: ![Selecting a keyboard type](/guide/images/exinst_keyboard.png)  
   77: **Selecting a keyboard type**
   79: This will bring you to the main menu of the installation program:
   81: ![The sysinst main menu](/guide/images/exinst_main.png)  
   82: **The sysinst main menu**
   84: Choosing the *Install NetBSD to hard disk* option brings you to the next screen
   85: , where you need to confirm that you want to continue the installation:
   87: ![Confirming to install NetBSD](/guide/images/exinst_confirm.png)  
   88: **Confirming to install NetBSD**
   90: After choosing *Yes* to continue, sysinst displays a list of one or more disks
   91: and asks which one you want to install NetBSD on. In the example given in the
   92: following figure, there are two disks, and NetBSD will be installed on `wd0`,
   93: the first IDE disk found. If you use SCSI or external USB disks, the first will
   94: be named `sd0`, the second `sd1` and so on.
   96: ![Choosing a hard disk](/guide/images/exinst_select_disk.png)  
   97: **Choosing a hard disk**
   99: The installer will then ask whether you want to do a full, minimal or custom
  100: installation. NetBSD is broken into a collection of distributions sets. *Full
  101: installation* is the default and will install all sets; *Minimal installation*
  102: will only install a small core set, the minimum of what is needed for a working
  103: system. If you select *Custom installation* you can select which sets you would
  104: like to have installed. This step is shown here:
  106: ![Full or custom installation](/guide/images/exinst_install-type.png)  
  107: **Full or custom installation**
  109: If you choose to do a custom installation, sysinst will allow you to choose
  110: which distribution sets to install, as shown in the following figure. At a
  111: minimum, you must select a kernel and the *Base* and *System (/etc)* sets.
  113: ![Selecting distribution sets](/guide/images/exinst_sets.png)  
  114: **Selecting distribution sets**
  116: ## MBR partitions
  118: The first important step of the installation has come: the partitioning of the
  119: hard disk. First, you need to specify whether NetBSD will use a partition
  120: (suggested choice) or the whole disk. In the former case it is still possible to
  121: create a partition that uses the whole hard disk (see below) so we recommend
  122: that you select this option as it keeps the BIOS partition table in a format
  123: which is compatible with other operating systems.
  125: ![Choosing the partitioning scheme](/guide/images/exinst_mbr.png)  
  126: **Choosing the partitioning scheme**
  128: The next screen shows the current state of the MBR partition table on the hard
  129: disk before the installation of NetBSD. There are four primary partitions, and
  130: as you can see, this example disk is currently empty. If you do have other
  131: partitions you can leave them around and install NetBSD on a partition that is
  132: currently unused, or you can overwrite a partition to use it for NetBSD.
  134: ![fdisk](/guide/images/exinst_fdisk.png)  
  135: **fdisk**
  137: Deleting a partition is simple: after selecting the partition, a menu with
  138: options for that partition will appear (see below). Change the partition kind to
  139: *Delete partition* to remove the partition. Of course, if you want to use the
  140: partition for NetBSD you can set the partition kind to *NetBSD*.
  142: You can create a partition for NetBSD by selecting the partition you want to
  143: install NetBSD to. The partition names `a` to `d` correspond to the four primary
  144: partitions on other operating systems. After selecting a partition, a menu with
  145: options for that partition will appear, as shown here:
  147: ![Partition options](/guide/images/exinst_fdisk-type.png)  
  148: **Partition options**
  150: To create a new partition, the following information must be supplied:
  152:  * the type (kind) of the new partition
  153:  * the first (start) sector of the new partition
  154:  * the size of the new partition
  156: Choose the partition type *NetBSD* for the new partition (using the `type`
  157: option). The installation program will try to guess the *start* position based
  158: on the end of the preceding partition. Change this value if necessary. The same
  159: thing applies to the `size` option; the installation program will try to fill in
  160: the space that is available until the next partition or the end of the disk
  161: (depending on which comes first). You can change this value if it is incorrect,
  162: or if you do not want NetBSD to use the suggested amount of space.
  164: After you have chosen the partition type, start position, and size, it is a good
  165: idea to set the name that should be used in the boot menu. You can do this by
  166: selecting the *bootmenu* option and providing a label, e.g., `NetBSD`. It is a
  167: good idea to repeat this step for other bootable partitions so you can boot both
  168: NetBSD and a Windows system (or other operating systems) using the NetBSD
  169: bootselector. If you are satisfied with the partition options, confirm your
  170: choice by selecting *Partition OK*. Choose *Partition table OK* to leave the MBR
  171: partition table editor.
  173: If you have made an error in partitioning (for example you have created
  174: overlapping partitions) sysinst will display a message and suggest that you go
  175: back to the MBR partition editor (but you are also allowed to continue). If the
  176: data is correct but the NetBSD partition lies outside the range of sectors which
  177: is bootable by the BIOS, sysinst will warn you and ask if you want to proceed
  178: anyway. Doing so may lead to problems on older PCs.
  180: *Note*: This is not a limitation of NetBSD. Some old BIOSes cannot boot a
  181: partition which lies outside the first 1024 cylinders. To fully understand the
  182: problem you should study the different type of BIOSes and the many addressing
  183: schemes that they use (*physical CHS*, *logical CHS*, *LBA*, ...). These topics
  184: are not described in this guide.
  186: On modern computers (those with support for *int13 extensions*), it is possible
  187: to install NetBSD in partitions that live outside the first 8 GB of the hard
  188: disk, provided that the NetBSD boot selector is installed.
  190: Next, sysinst will offer to install a boot selector on the hard disk. This
  191: screen is shown here:
  193: ![Installing the boot selector](/guide/images/exinst_bootselect.png)  
  194: **Installing the boot selector**
  196: At this point, the *BIOS partitions* (called *slices* on BSD systems) have been
  197: created. They are also called *PC BIOS partitions*, *MBR partitions* or *fdisk
  198: partitions*.
  200: *Note*: Do not confuse the *slices* or *BIOS partitions* with the *BSD
  201: partitions*, which are different things.
  203: ## Disklabel partitions
  205: Some platforms, like PC systems (amd64 and i386), use DOS-style MBR partitions
  206: to separate file systems. The MBR partition you created earlier in the
  207: installation process is necessary to make sure that other operating systems do
  208: not overwrite the diskspace that you allocated to NetBSD.
  210: NetBSD uses its own partition scheme, called a *disklabel*, which is stored at
  211: the start of the MBR partition. In the next few steps you will create a
  212: [[!template id=man name="disklabel" section="5"]]
  213: and set the sizes of the NetBSD partitions, or use existing partition sizes, as
  214: shown here:
  216: ![Edit partitions?](/guide/images/exinst_disklabel.png)  
  217: **Edit partitions?**
  219: When you choose to set the sizes of the NetBSD partitions you can define the
  220: partitions you would like to create. The installation program will generate a
  221: disklabel based on these settings. This installation screen is shown here:
  223: ![Setting partition sizes](/guide/images/exinst_disklabel-change.png)  
  224: **Setting partition sizes**
  226: The default partition scheme of just using a big `/` (root) file system (plus
  227: swap) works fine with NetBSD, and there is little need to change this. The
  228: previous figure shows how to change the size of the swap partition to 600 MB.
  229: Changing `/tmp` to reside on a *RAM disk*
  230: ([[!template id=man name="mfs" section="8"]]) for
  231: extra speed may be a good idea. Other partition schemes may use separate
  232: partitions for `/var`, `/usr` and/or `/home`, but you should use your own
  233: experience to decide if you need this.
  235: The next step is to create the disklabel and edit its partitions, if necessary,
  236: using the disklabel editor (see below). If you predefined the partition sizes in
  237: the previous step, the resulting disklabel will probably fit your wishes. In
  238: that case you can complete the process immediately by selecting *Partition sizes
  239: ok*.
  241: ![The disklabel editor](/guide/images/exinst_disklabel-partitions.png)  
  242: **The disklabel editor**
  244: There are two reserved partitions, `c`, representing the NetBSD partition, and
  245: `d`, representing the whole disk. You can edit all other partitions by using the
  246: cursor keys and pressing the return key. You can add a partition by selecting an
  247: unused slot and setting parameters for that partition. The partition editing
  248: screen is shown below:
  250: ![Disklabel partition editing](/guide/images/exinst_disklabel-partition-editor.png)  
  251: **Disklabel partition editing**
  253: ## Setting the disk name
  255: After defining the partitions in the new disklabel, the last item is to enter a
  256: name for the NetBSD disk as shown bwlow. This can be used later to distinguish
  257: between disklabels of otherwise identical disks.
  259: ![Naming the NetBSD disk](/guide/images/exinst_diskname.png)  
  260: **Naming the NetBSD disk**
  262: ## Last chance!
  264: The installer now has all the data it needs to prepare the disk. Nothing has
  265: been written to the disk at this point, and now is your last chance to abort the
  266: installation process before actually writing data to the disk. Choose *no* to
  267: abort the installation process and return to the main menu, or continue by
  268: selecting *yes*.
  270: ![Last chance to abort](/guide/images/exinst_last-chance.png)  
  271: **Last chance to abort**
  273: ## The disk preparation process
  275: After confirming that sysinst should prepare the disk, it will run
  276: [[!template id=man name="disklabel" section="8"]]
  277: to create the NetBSD partition layout and
  278: [[!template id=man name="newfs" section="8"]] to
  279: create the file systems on the disk.
  281: After preparing the NetBSD partitions and their filesystems, the next question
  282: (shown in the next figure) is which *bootblocks* to install. Usually you will
  283: choose the default of *BIOS console*, i.e., show boot messages on your
  284: computer's display.
  286: If you run a farm of machines without monitor, it may be more convenient to use
  287: a serial console running on one of the serial ports. The menu also allows
  288: changing the serial port's baud rate from the default of 9600 baud, 8 data bits,
  289: no parity and one stopbit.
  291: ![Selecting bootblocks](/guide/images/exinst_bootblocks.png)  
  292: **Selecting bootblocks**
  294: ## Choosing the installation media
  296: At this point, you have finished the first and most difficult part of the
  297: installation!
  299: The second half of the installation process consists of populating the file
  300: systems by extracting the distribution sets that you selected earlier (base,
  301: compiler tools, games, etc). Before unpacking the sets, sysinst asks what
  302: information you would like to see during that process, as shown below. You can
  303: choose between a progress bar, a display of the name of each extracted file, or
  304: nothing.
  306: ![Choosing the verbosity of the extraction process](/guide/images/exinst_verbosity.png)  
  307: **Choosing the verbosity of the extraction process**
  309: Now sysinst needs to find the NetBSD sets and you must tell it where to find
  310: them. The menu offers several choices, as shown below. The options are explained
  311: in detail in the `INSTALL` documents.
  313: ![Installation media](/guide/images/exinst_medium.png)  
  314: **Installation media**
  316: ### Installing from CD-ROM or DVD
  318: When selecting *CD-ROM / DVD*, sysinst asks the name of the CD-ROM or DVD device
  319: and the directory in which the set files are stored, see below. The device is
  320: usually `cd0` for the first CD-ROM or DVD drive, regardless of whether it is IDE
  321: or SCSI (or even USB or FireWire).
  323: ![CD-ROM/DVD installation](/guide/images/exinst_cdrom.png)  
  324: **CD-ROM/DVD installation**
  326: ### The CD-ROM/DVD device name
  328: If you don't know the name of the CD-ROM/DVD device, you can find by doing the
  329: following:
  331:  1. Press Ctrl-Z to pause sysinst and go to the shell prompt.
  333:  2. Type the command:
  335:         # dmesg
  337:     This will show the kernel startup messages, including the name of the CD-ROM device, for example *cd0*.
  339:  3. If the display scrolls too quickly, you can also use **more**:
  341:         # dmesg | more
  343:  4. Go back to the installation program with the command:
  345:         # fg
  347: ### Installing from an unmounted file system
  349: The next figure shows the menu to install NetBSD from an unmounted file system.
  350: It is necessary to specify the device (*Device*), the file system of the device
  351: (*File system*) and the path to the install sets (*Set directory*). The setting
  352: for the *Base directory* is optional and can be kept blank.
  354: In the following example the install sets are stored on a *MSDOS* file system,
  355: on partition `e` on the device `sd0`.
  357: ![Mounting a file system](/guide/images/exinst_mount.png)  
  358: **Mounting a file system**
  360: It is usually necessary to specify the device name and the partition. The
  361: following figure shows how to specify device `sd0` with partition `e`.
  363: ![Mounting a partition](/guide/images/exinst_mount-partition.png)  
  364: **Mounting a partition**
  366: In the next figure, the file system type is specified. It is `msdos` but it
  367: could also be the NetBSD file system `ffs` or `ext2fs`, a Linux file system. The
  368: *Base directory item is left blank and the binary sets are stored under `/sets`.
  369: Choosing *Continue* will start the extraction of the sets.
  370: *
  372: ![Accessing a MSDOS file system](/guide/images/exinst_mount-msdos.png)  
  373: **Accessing a MSDOS file system**
  375: ### Installing via FTP
  377: If you choose to install from a local network or the Internet via FTP, sysinst
  378: will configure the system's network connection, download the selected set files
  379: to a temporary directory, and then extract them.
  381: NetBSD currently supports installation via ethernet, USB ethernet or wireless,
  382: and wireless LAN. Installation via DSL (PPP over Ethernet) is not supported
  383: during installation.
  385: The first step shown in the next figure further below consists of selecting
  386: which network card to configure. sysinst will determine a list of available
  387: network interfaces, present them and ask which one to use.
  389: *Note*: The exact names of your network interfaces depend on the hardware you
  390: use. Example interfaces are `wm` for Intel Gigabit interfaces, `ne` for NE2000
  391: and compatible ethernet cards, and `ath` for Atheros based wireless cards. This
  392: list is by no means complete, and NetBSD supports many more network devices.
  394: To get a list of network interfaces available on your system, interrupt the
  395: installation process by pressing `Ctrl+Z`, then enter
  397:     # ifconfig -a
  398:     ne2: flags=8822<UP,BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
  399:             address: 00:06:0d:c6:73:d5
  400:             media: Ethernet autoselect 10baseT full-duplex
  401:             status: active
  402:             inet netmask 0xffffff00 broadcast
  403:             inet6 fe80::206:dff:fec6:73d5%ne2 prefixlen 64 scopeid 0x1
  404:     lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33196
  405:             inet netmask 0xff000000
  406:             inet6 ::1 prefixlen 128
  407:             inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
  408:     ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
  409:     ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
  410:     sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
  411:     sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
  412:     strip0: flags=0 mtu 1100
  413:     strip1: flags=0 mtu 1100
  415: To get more information about all the devices found during system startup,
  416: including network devices, type
  418:     # dmesg | more
  420: You can return to the NetBSD installation by typing
  422:     # fg
  424: ![Which network interface to configure](/guide/images/exinst_ftp-if.png)  
  425: **Which network interface to configure**
  427: Next, you have a chance to set your network medium.
  429: *Note*: It is unlikely that you will need to enter anything other than the
  430: default here. If you experience problems like very slow transfers or timeouts,
  431: you may, for example, force different duplex settings for ethernet cards. To get
  432: a list of supported media and media options for a given network device (ne2, for
  433: example), escape from sysinst by pressing `Ctrl+Z`, then enter:
  435:     # ifconfig -m ne2
  436:     ne2: flags=8822<UP,BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
  437:             address: 00:03:0d:c6:73:d5
  438:             media: Ethernet 10baseT full-duplex
  439:             status: active
  440:             supported Ethernet media:
  441:                     media 10baseT
  442:                     media 10baseT mediaopt full-duplex
  443:                     media 10base2
  444:                     media autoselect
  446: The various values printed after `media` may be of interest here, including
  447: keywords like `autoselect` but also including any `mediaopt` settings.
  449: Return to the installation by typing:
  451:     # fg
  453: The next question will be whether you want to perform DHCP autoconfiguration as
  454: shown in the figure below. Answer *Yes* if you have a DHCP *Dynamic Host
  455: Configuration Protocol* (DHCP) running somewhere on your network, and sysinst
  456: will fetch a number of defaults from it. Answer *No* to enter all the values
  457: manually.
  459: We will assume you answered *No* and go into all the questions asked in detail.
  461: ![Using DHCP for network configuration](/guide/images/exinst_ftp-dhcp.png)  
  462: **Using DHCP for network configuration**
  464: The image below shows the questions asked for the network configuration. The
  465: values to be entered are:
  467:  * *Your DNS Domain:* -- This is the name of the domain you are in.
  468:  * *Your hostname:* -- The name by which other machines can usually address your
  469:    computer. Not used during installation.
  470:  * *Your IPv4 number:* -- Enter your numerical Internet Protocol address in
  471:    *dotted quad* notation here, for example,
  472:  * *IPv4 Netmask:* -- The netmask for your network, either given as a hex value
  473:    (`0xffffff00`) or in dotted-quad notation (``).
  474:  * *IPv4 gateway:* -- Your router's (or default gateway's) IP address. Do not
  475:    use a hostname here!
  476:  * *IPv4 name server:* -- Your (first) DNS server's IP address. Again, don't use
  477:    a hostname.
  479: ![Entering and configuring network data](/guide/images/exinst_ftp-cfg.png)  
  480: **Entering and configuring network data**
  482: After answering all of your network configuration info, it will be displayed,
  483: and you will have a chance to go back and make changes.
  485: ![Confirming network parameters](/guide/images/exinst_ftp-cfgok.png)  
  486: **Confirming network parameters**
  488: sysinst will now run a few commands (not displayed in detail here) to configure
  489: the network: flushing the routing table, setting the default route, and testing
  490: if the network connection is operational.
  492: Now that you have a functional network connection, you must tell the installer
  493: how to get the distribution sets, as shown in the next figure.
  495: When you are satisfied with your settings (the defaults work most of the time),
  496: choose *Get Distribution* to continue.
  498: ![Defining the FTP settings](/guide/images/exinst_ftp-src.png)  
  499: **Defining the FTP settings**
  501: ### Installing via NFS
  503: If you want to install NetBSD from a server in your local network, NFS is an
  504: alternative to FTP.
  506: *Note*: Using this installation method requires the ability to set up an NFS
  507: server, a topic which is not discussed here.
  509: As shown below, you must specify the IP address of the NFS server with "Host",
  510: the "Base directory" that is *exported* by the NFS server, and the "Set
  511: directory", which contains the install sets.
  513: ![NFS install screen](/guide/images/exinst_nfs.png)  
  514: **NFS install screen**
  516: The following image shows an example: Host `` is the NFS server that
  517: provides the directory `/home/username/Downloads` The NetBSD install sets are
  518: stored in the directory `/home/username/Downloads/sets` on the NFS server.
  519: Choose *Continue* to start the installation of the distribution sets.
  521: ![NFS example](/guide/images/exinst_nfs-example.png)  
  522: **NFS example**
  524: ## Extracting sets
  526: After the method for obtaining distribution sets has been chosen, and (if
  527: applicable) after those sets have been transferred, they will be extracted into
  528: the new NetBSD file system.
  530: After extracting all selected sets, sysinst will create device nodes in the
  531: `/dev` directory and then display a message saying that everything went well.
  533: Another message will let you know that the set extraction is now completed, and
  534: that you will have an opportunity to configure some essential things before
  535: finishing the NetBSD installation:
  537: ![Extraction of sets completed](/guide/images/exinst_extraction-complete.png)  
  538: **Extraction of sets completed**
  540: ## System configuration
  542: Having reached this point of the installation you will see the configuration
  543: menu:
  545: ![Configuration menu](/guide/images/exinst_configuration_menu.png)  
  546: **Configuration menu**
  548: Here, you can do the following:
  550:  * *Configure network* -- make changes to the network settings on the installed
  551:    system, i.e. either configure it or if you already did, write that
  552:    configuration to disk.
  554:  * *Timezone* -- set your time zone.
  556:  * *Root shell* -- this potion allows you to choose which command line
  557:    interpreter, also known as *shell*, will be used for the root account.
  559:  * *Change root password* -- set the password you will use to login in as root.
  561:  * *Enable installation of binary packages* -- this option enables the
  562:    installation of binary packages (3rd party software).
  564:  * *Fetch and unpack pkgsrc for building from source* -- install the pkgsrc
  565:    tree for installing third-party software from source.
  567:  * *Enable sshd* -- enable the secure shell daemon sshd(8) to allow users to
  568:    login over an insecure network.
  570:  * *Enable ntpd* -- ntpd(8) is the daemon to keep the system time accurate.
  572:  * *Run ntpdate at boot* -- sets the local date and time.
  574:  * *Enable mdnsd* -- a daemon invoked at boot time to implement Multicast DNS
  575:    and DNS Service Discovery.
  577: #### Configure network
  579: The process was already described previously, you can just call it again and
  580: have the results directly written to disk.
  582: #### Timezone
  584: The timezone is Universal Time Coordinated (UTC) by default, and you can use the
  585: two-level menu of continents/countries and cities shown in the figure below to
  586: select your timezone with the Return Key.
  588: ![Timezone selection](/guide/images/exinst_timezone.png)  
  589: **Selecting the system's time zone**
  591: #### Root Shell
  593: The default is the classic Bourne shell, sh(1). Other choices are the Korn shell
  594: (ksh(1)) and the C shell(csh(1)). If, upon reading this, you don't have some
  595: idea of which shell you prefer, simply use the default, as this is a highly
  596: subjective decision. Should you later change your mind, root's shell can always
  597: be changed with the chsh(1) command or by directly editing master.passwd(5).
  599: ![Root Shell](/guide/images/exinst_rootshell.png)  
  600: **Root Shell**
  602: #### Change root password
  604: Perhaps one of the things that you would want to configurate is your root
  605: password. If you don't, it is unset, i.e. you can login as root just by entering
  606: the login name without a password.
  608: ![Change root password](/guide/images/exinst_change_root_password.png)  
  609: **Change root password**
  611: When you agree to set a root password, sysinst will run the passwd(1) utility
  612: for you. Please note that the password is not echoed:
  614: ![Entering root password](/guide/images/exinst_entering_root_password.png)  
  615: **Entering the root password**
  617: #### Enable installation of binary packages
  619: This option installs pkgin(1) and initialises its database. This will feel
  620: familiar to users of other package tools, such as apt-get, pkg or yum.
  622: Note that installing pkgin will need a network connection. If you didn't set it
  623: up yet, this option will call the configuration for you.
  625: ![Enable installation of binary packages](/guide/images/exinst_pkgin.png)  
  626: **Enable installation of binary packages**
  628: When the installation is finished, a short help is provided, and you can return
  629: to the main menu:
  631: ![After enabling installation of binary packages](/guide/images/exinst_pkgin_after.png)  
  632: **After enabling installation of binary packages**
  634: #### Fetch and unpack pkgsrc for building from source.
  636: Use this option to download the [pkgsrc]( tree to install
  637: additional packages by source. Note that this method in many cases conflicts
  638: with binary packages, so you should decide for either one of them or use
  639: different directories for installing packages.
  641: This will require a network connection set up, otherwise, it will ask for it
  642: itself.
  644: ![Fetch and unpack pkgsrc](/guide/images/exinst_fetch_and_unpack_pkgsrc.png)  
  645: **Fetch and unpack pkgsrc for building from source**
  647: This step will take a while, as pkgsrc consists of many small files which have
  648: to be unpacked on your hard disk, and several 10MB have to be downloaded.
  650: #### Enabling daemons
  652: Finally, you can enable some daemons such as sshd(8), ntpd(8) or mdnsd(8) and
  653: choose whether you want to run ntpdate(8) at boot, which will set the time no
  654: matter how large the gap between "real" time and you computer's time is. ntpd
  655: will not set the time when the time skew is too large.
  657: *Note*: You can change these settings any time you want after the installation.
  658: You can either do this by directly editing the configuration files, or by
  659: running sysinst(8) again (either from the running system, or from an
  660: installation CD).
  662: *Note*: When you run this menu when you already installed NetBSD, but want to
  663: configure the running system, you have to choose the hard disk NetBSD is
  664: installed on. When sysinst doesn't find an NetBSD installation, it will fail,
  665: and you have to choose another disk.
  667: ## Finishing the installation
  669: At this point the installation is finished.
  671: ![Installation completed](/guide/images/exinst_completed.png)  
  672: **Installation completed**
  674: After passing the dialog that confirms the installation, sysinst will return to
  675: the main menu. Remove any installation media (CD, floppy, etc.) and choose
  676: *Reboot the computer* to boot your new NetBSD installation.
  678: ![Reboot to finish installation](/guide/images/exinst_reboot.png)  
  679: **Reboot to finish installation**

CVSweb for NetBSD wikisrc <> software: FreeBSD-CVSweb