[[!template id=port port="atari" iso_image="true" cur_rel="9.3" future_rel="10.0" pkg_rel="8.0" changes_cur="9.0" changes_future="10.0" thumbnail="//www.netbsd.org/images/ports/atari/atari.gif" about=""" NetBSD/atari is the port of NetBSD to the Atari line of personal computers. Development activity on NetBSD/atari continues at a speed dependent on people's spare time. Currently, NetBSD/atari runs on the TT030, Falcon and Hades. Experimental support is available for the Milan. """ supported_hardware=""" A minimal system should have a 68030 CPU, 4MB RAM (of which 2MB can be ST-RAM) and a SCSI or IDE disk. An FPU is not really necessary because the BOOT and BOOTX kernels supplied in the distribution both contain FPU-emulation support. Although the current emulation does not yet cover the full MC68882 instruction set, you will see that you will get a very workable system. * ST and TT video modes, including TT-HIGH * Falcon video (except Direct Color - 15/16 bit depth) * Hades et4000/w32-pci video adapter * Hades et6000-pci and et6100-pci video adapter * Builtin 5380 SCSI adapter * Most SCSI disks, CD-ROM's, tape's and ZIP drives * Realtime clock * SCC serial ports (serial2/modem2) * 720Kb/1.44Mb floppy drive * Parallel printer * The IDE interface on both Falcon and Hades (Including ATAPI) * The serial interface on the first 68901 UART (modem1) * 68060 support for the Falcon (CT60/63) and Hades * The Falcon FX memory expansion * The atari mouse * A 3-button mouse (see build description) * EtherNEC Ethernet on ROM cartridge slot (-current) * Supported VME-bus devices (TT030/Hades) * VME BVME410 Ethernet * Circad Leonardo 24-bit VME graphics adapter * Crazy Dots VME et4000 graphics adapter * VME Riebl (and possibly PAM) Ethernet * SMC Elite Ultra ISA Ethernet with SMC_TT VME-ISA bridge (-current) * Supported Hades PCI-devices * Adaptec 2940U SCSI NOT (see the note below) * ESS Technology Inc. Solo-1 Soundcard * 3Com 3c59x Network card * Supported Hades ISA-devices * I4BSD support for the teles 16.3 card * NE2000 compatible cards * Supported Milan PCI-devices * Intel EtherExpress PRO 10+/100B ###Note > The Hades PCI bus is very critical. Many cards are not recognized. This seems to be due to electrical problems. > The current Adaptec driver does no longer work, unfortunately. """ ]] [[!tag tier2port]]